Eth mining graphics card brush BIOS

1. You can use the latest BIOS on the official website.
the settings have been adjusted in the new BIOS. There are operation steps in DOS. You can refer to the following
Mining graphics card to install a driver. Mining generally uses the same chip graphics card

2. There is such an operation. The so-called BIOS brushing is only applicable to some graphics cards, not all graphics cards. Some graphics cards are upgraded by manufacturers. For example, HD5750 and hd6750 increase the frequency of GPU, and a small amount of them increase the processor. But the core GPU is the same. At this time, you can brush BIOS to change 5750 into pseudo 6750 to improve the performance. This technique is similar to overclocking. But the success rate is not 100%.

3. Do not brush other BIOS or modified BIOS for rx580, or you will not find the graphics card when you start up, and you will have to patch it every time.

if you want to brush, you have to brush the same core and high-end BIOS of the same brand, such as rx580 black wolf brush rx580 black wolf evolution
rx570 brush rx580 2048sp of the same brand (this may need to change the cooling or adjust the fan)
Direct overclocking is the simplest
driver console, which can be used in wattman

4. Methods and steps of swiping BIOS of graphics card under Windows:
required software:
1. Imager's grinding disc (I believe it's not strange, especially for gamers of imager's graphics card, they can also perfectly support other brands of graphics card)
2. Nibitor (editing software for BIOS of graphics card, the current version is v5.4)
3. Gpu-z
4. Some ing software, 3DMark06, and some abnormal games, such as island crisis Biochemical crisis, for overclocking after the test machine
Start:
1. First, use the imager disc to soft overclocking the graphics card, and the amplitude should not be too large; After the application, repeatedly run 3dmark 06 or play an island crisis for 1 or 2 hours, ring which there is no splash screen or crash phenomenon, indicating that your overclocking is successful and stable! Write down the frequency of overclocking data, core, video memory and shader
2. Open gpu-z, backup and save the BIOS of the graphics card
3. Open nibitor software to edit the frequency of the original BIOS, as long as the data of soft overclocking is rewritten and saved separately. In order is the core - shader - video memory
4. Then click magic BIOS and select the BIOS you edited with nibitor to swipe in. After a few seconds, it will show that you are finished and restart the computer Don't turn off the power, otherwise you will be finished if you interrupt the power by brushing BIOS (HA HA)
5. Enter the system again and use GPU to check whether the default frequency of the graphics card is the modified data!

5. Soft change is OK, no need to brush BIOS, easy to brush bad

your graphics card is best ATI graphics card

Introction to soft change method, go to Google Search & quot; AIT soft Reform & quot; That is

http://www.oc.com.tw/article/0803/readarticle.asp?id=6344

of course, the public version of graphics card, sapphire, Dylan Hengjin, ASUS and other first-line brand public version procts are selected for transformation< br /> http://diybbs.zol.com.cn/frmView.php?frameon=yes&subcatid=161&bookid=23853&ref0=http :// www..com/s?tn=360se_ 3_ DG & ie = GB2312 & Bs = ATI + radon + HD + 3850 & SR = & z = & CL = 3 & F = 8 & WD = ATI + radon + HD + 3850 + +% C8% ed% B8% C4 & CT = 0

only the low-end graphics card of MX400 has been soft modified, but the latest graphics card of 3850 has not been tried. However, after all, it's a soft change. It can only improve the professional drawing ability of the graphics card, and there is still a certain gap with the professional graphics card. However, for general applications, it's enough. I'm afraid there is no perfect crack driver, so I can only test which one is better.

6. Brushing BIOS means restoring the factory default settings, or updating the built-in version of the graphics card. How to refresh the N card BIOS, you can go to the N card forum to see, touch a lot! wish you success!

7.

VI and VT are different in suffix, passive form and content

VI: VI is an intransitive verb. It can't be followed by a noun directly. It needs to add a to

Vt: VT is a transitive verb followed by a noun

VT is the abbreviation of English Transitional verb, followed by a noun directly, such as play basketball. In contrast, VI (intransitive verb) is an intransitive verb, which can not be followed by a noun directly. It needs to add a to, such as listen to music

Second, the passive form is different.

1. VI: VI has the passive form and its action has the object

Vt: VT transitive verb has no passive, its action has no object

Third, the content is different from each other

2. VT: VT transitive verbs indicate a certain state

8.

bus route: no.865 → no.906, the whole journey is about 7.8km

1. Walk about 10m from Joy City (Tianjin) to Nanshi Hotel Street Station

2. Take no.865, pass 5 stops, and reach Changsha Road Station (also take no.657, 840)

3. Take no.906, pass 8 stops, and reach Nan station of hotel (also take no.641)

4. Walk about 270m, Arrive at Tianjin International Exhibition Center on friendship road

9.

1. Meaning: the former is the abbreviation of transitive verb, the latter is the abbreviation of intransitive verb

Concept:

transitive verb: "transitive" means the verb with object, so "transitive verb" means the verb with object, and "intransitive verb" means the verb without object

intransitive verb: a notional verb with complete meaning and not directly followed by an object is called an intransitive verb

The difference between transitive verb (vt.) and intransitive verb (VI.) is: whether the object is needed or not:

transitive verb (vt.):

a notional verb whose meaning is complete is called transitive verb

In other words: vt. can be directly followed by a noun without other prepositions

eg:

we will post the letter soon Keep is vt.

intransitive verb (VI.):

has complete meaning and is not followed by the object directly, which is called intransitive verb

In other words: VI. a preposition or other part of speech word must be followed before it can be used with a noun or other phrase

He will arrive at the airport at 9 o'clock. (arrive is VI.)

I want to go shopping. (want is VI.)

birds can fly. (fly is VI.)

< P >

there is another special situation in English, that is, a verb has the attributes of transitivity and intransitivity

for example, run in the previous picture can be used as a transitive verb, which means "management, operation" (followed by the object); It can also be used as an intransitive verb to express "running, running"

Such verbs can be divided into two situations:

1. When they are used as transitive verbs and inferior verbs, their meanings remain unchanged

Shall I begin?

can I start He began to work as a doorman after being laid off When it is used as a transitive verb, it has different meanings

I always walk after dinner I walked her home with her Walk is a transitive verb, which means "go with sb."