ASUS 10606g mining
Publish: 2021-05-25 10:59:41
1. The computer has been connected to the Internet, and is WLAN normal<
you can try to update the WLAN Driver
you can try to turn off the WLAN and then turn it on in the BIOS
edited on September 2, 2017. The right belongs to the author
agree with 1
comments
more answers
xiaguanfeng, shangguanhua, cangshanxue, erhaiyue
1. See if the NIC driver is broken. If the driver is broken, you need to re install the driver, download an offline driver or go to the official website to find the corresponding version of the driver
2 if it's not broken, just re-establish the connection. It is recommended that you follow the following methods
1. If the computer uses the client dial-up Internet, it is unable to realize wireless sharing (such as campus network client dial-up Internet)
2. Update your Windows system to the latest version
3. Uninstall the third-party wireless sharing software (such as cheetah, etc.), and use the system's own mobile hotspot function to share wireless
4 If it cannot be shared, please replace the wireless network card driver of the system
first of all, laptops are connected to mobile hotspots in the same way as wireless networks, which are all connected in WLAN. However, your situation should be that your computer is not connected to the network. Come again. The mobile hotspot option of laptop is the way that the laptop converts the connected network into a hotspot for other devices to connect. The premise of this option is that the laptop should be connected to the network
so your problem should be that you don't know how the notebook connects to the mobile hotspot
the solution is to connect at WLAN. When you can't solve the problem by using simple settings, you can try the following method, which is effective by testing
Press win-x to open the option box, select the administrator command prompt, open the command window, input
Netsh Winsock reset catalog command, press enter to display the reset success. Then restart the computer,
and try again whether you can connect the hotspot of the mobile phone. Basically, it can be solved<
hotspot settings are generally based on wireless network card, and it is recommended to use 360 free WiFi
if you use a desktop computer, or do not have a wireless network card, or do not turn on the wireless network card, you cannot use the hotspot
however, the description of your problem should be the corresponding hotspot. If you can't access the Internet, it is recommended to check whether the hotspot device can access the Internet normally
the answer is wrong. The reason why you can't turn on the hotspot is because you are using broadband dial-up. The hotspot of win10 can't be turned on if you connect a router, or if your network cable doesn't need to do anything, you can directly have a network. Or the next third-party software<
set the notebook WiFi as the WiFi hotspot, so that the mobile phone can connect the notebook WiFi hotspot to the Internet, but now it can't connect to the Internet normally, because the following problems have not been solved well:
1. Determine whether the notebook computer can connect to the Internet normally, that is, the "local connection" network connection is normal
2. Determine whether the laptop has a wireless network card and whether the wireless network card is turned on
3. Check whether the network share of "local connection" is set correctly
solution:
1. Check whether the "local connection" network is normal, as shown in the figure:
2. Re install the wireless network card driver and turn on the wireless network card switch
3. A. restart the computer, open WiFi, and select "wireless network connection" in "local connection" and "home network connection"
B. set up a hotspot to connect (be sure to connect here, otherwise the following one will pop up the network sharing error dialog box), As shown in the figure:
C. right click the "local connection" attribute and select "wireless network connection" from "home network connection" in the "sharing" tab, as shown in the figure:
D. disconnect the wireless hotspot connection and re connect,
first of all, you have to have a wireless network card, otherwise you can't launch the wireless bank!
you can try to update the WLAN Driver
you can try to turn off the WLAN and then turn it on in the BIOS
edited on September 2, 2017. The right belongs to the author
agree with 1
comments
more answers
xiaguanfeng, shangguanhua, cangshanxue, erhaiyue
1. See if the NIC driver is broken. If the driver is broken, you need to re install the driver, download an offline driver or go to the official website to find the corresponding version of the driver
2 if it's not broken, just re-establish the connection. It is recommended that you follow the following methods
1. If the computer uses the client dial-up Internet, it is unable to realize wireless sharing (such as campus network client dial-up Internet)
2. Update your Windows system to the latest version
3. Uninstall the third-party wireless sharing software (such as cheetah, etc.), and use the system's own mobile hotspot function to share wireless
4 If it cannot be shared, please replace the wireless network card driver of the system
first of all, laptops are connected to mobile hotspots in the same way as wireless networks, which are all connected in WLAN. However, your situation should be that your computer is not connected to the network. Come again. The mobile hotspot option of laptop is the way that the laptop converts the connected network into a hotspot for other devices to connect. The premise of this option is that the laptop should be connected to the network
so your problem should be that you don't know how the notebook connects to the mobile hotspot
the solution is to connect at WLAN. When you can't solve the problem by using simple settings, you can try the following method, which is effective by testing
Press win-x to open the option box, select the administrator command prompt, open the command window, input
Netsh Winsock reset catalog command, press enter to display the reset success. Then restart the computer,
and try again whether you can connect the hotspot of the mobile phone. Basically, it can be solved<
hotspot settings are generally based on wireless network card, and it is recommended to use 360 free WiFi
if you use a desktop computer, or do not have a wireless network card, or do not turn on the wireless network card, you cannot use the hotspot
however, the description of your problem should be the corresponding hotspot. If you can't access the Internet, it is recommended to check whether the hotspot device can access the Internet normally
the answer is wrong. The reason why you can't turn on the hotspot is because you are using broadband dial-up. The hotspot of win10 can't be turned on if you connect a router, or if your network cable doesn't need to do anything, you can directly have a network. Or the next third-party software<
set the notebook WiFi as the WiFi hotspot, so that the mobile phone can connect the notebook WiFi hotspot to the Internet, but now it can't connect to the Internet normally, because the following problems have not been solved well:
1. Determine whether the notebook computer can connect to the Internet normally, that is, the "local connection" network connection is normal
2. Determine whether the laptop has a wireless network card and whether the wireless network card is turned on
3. Check whether the network share of "local connection" is set correctly
solution:
1. Check whether the "local connection" network is normal, as shown in the figure:
2. Re install the wireless network card driver and turn on the wireless network card switch
3. A. restart the computer, open WiFi, and select "wireless network connection" in "local connection" and "home network connection"
B. set up a hotspot to connect (be sure to connect here, otherwise the following one will pop up the network sharing error dialog box), As shown in the figure:
C. right click the "local connection" attribute and select "wireless network connection" from "home network connection" in the "sharing" tab, as shown in the figure:
D. disconnect the wireless hotspot connection and re connect,
first of all, you have to have a wireless network card, otherwise you can't launch the wireless bank!
2. Yes
the performance of the game playing version is similar to that of the 6G video memory version, except for the lack of mining performance
there's no problem with medium efficiency and fluency when playing a large game like eating chicken. High special effects are OK, but the FPS of the game will be lower.
the performance of the game playing version is similar to that of the 6G video memory version, except for the lack of mining performance
there's no problem with medium efficiency and fluency when playing a large game like eating chicken. High special effects are OK, but the FPS of the game will be lower.
3. At present, the performance of gtx1060 3G graphics card is OK, that is, the 3G capacity of video memory can't drive high special effects when playing large-scale games, and the cost performance is also OK. Between 1299 and 1399 yuan, my personal opinion is that it's better to add about 300 yuan to 6G, and Pico gtx1060 6G is 1679 yuan,
4. How to select the type of voltage regulator:
1. The capacity safety factors of high-power compensated voltage regulator, voltage regulator without electric shock, purification voltage regulator, etc × COS￠ Therefore, in the actual selection, the regulated power supply should be reasonably selected according to the rated power, power factor and load type of the electrical equipment, and its output power should have an appropriate margin, especially for the impact load selection, the margin should be larger. The specific selection safety factor is shown in the table below. The safety factor of load nature equipment type is to select the regulated power supply capacity and pure resistive load, such as incandescent lamp, incandescent lamp, etc Resistance wire, electric furnace and other equipment should be 0.2 ~ 0.3 times of allowance. Inctive and capacitive loads such as fluorescent lamps, fans, motors, water pumps, air conditioners, computers, refrigerators, etc. should be 2 ~ 3 times of allowance. Under the environment of large inctive and capacitive loads (such as motors and computers), the starting current of the load should be considered when selecting the type, Therefore, the selection of regulator capacity should be 2 ~ 3 times of load power. For example: 1.1kw1 and 7.5kw1 three-phase motors, when voltage regulator is selected, the capacity ≥ (1.1KW + 7.5kW) × 2 = 17.2kva, that is to say, at least three-phase sjw-20kva voltage regulator should be selected
2. Output capacity curve of low-power regulated power supply (SVC, TND, TNS, relay type voltage regulator); output capacity of self coupled voltage regulator (single-phase 0.5kva ~ 3KVA, 10K horizontal and below, three-phase 9KVA and below) begins to decline when input phase voltage is lower than 198v; When the input phase voltage is equal to 160V, it will drop to 50% of the rated capacity of the voltage regulator; The voltage regulator can output two kinds of voltage at the same time: 220 V and 110 v. But even if it is all output by 110V, the load of the regulator should not exceed 50% of the rated capacity, otherwise it will be overloaded< It has strict requirements on the nature of the load equipment. It mainly uses one kind of load. If it is a mixed load, the capacity must be enlarged. Resistive load such as heating wire, electric cooker and other loads only need 0.2 times, capacitive and inctive load such as motor, large capacitor, transformer, etc At least 3-5 times of the margin of water pump and other loads depends on the actual situation of the site. For mixed loads such as motor and heating wire, the regulator must be 3-7 times of the margin. For mixed loads, it is better not to select the regulator.
1. The capacity safety factors of high-power compensated voltage regulator, voltage regulator without electric shock, purification voltage regulator, etc × COS￠ Therefore, in the actual selection, the regulated power supply should be reasonably selected according to the rated power, power factor and load type of the electrical equipment, and its output power should have an appropriate margin, especially for the impact load selection, the margin should be larger. The specific selection safety factor is shown in the table below. The safety factor of load nature equipment type is to select the regulated power supply capacity and pure resistive load, such as incandescent lamp, incandescent lamp, etc Resistance wire, electric furnace and other equipment should be 0.2 ~ 0.3 times of allowance. Inctive and capacitive loads such as fluorescent lamps, fans, motors, water pumps, air conditioners, computers, refrigerators, etc. should be 2 ~ 3 times of allowance. Under the environment of large inctive and capacitive loads (such as motors and computers), the starting current of the load should be considered when selecting the type, Therefore, the selection of regulator capacity should be 2 ~ 3 times of load power. For example: 1.1kw1 and 7.5kw1 three-phase motors, when voltage regulator is selected, the capacity ≥ (1.1KW + 7.5kW) × 2 = 17.2kva, that is to say, at least three-phase sjw-20kva voltage regulator should be selected
2. Output capacity curve of low-power regulated power supply (SVC, TND, TNS, relay type voltage regulator); output capacity of self coupled voltage regulator (single-phase 0.5kva ~ 3KVA, 10K horizontal and below, three-phase 9KVA and below) begins to decline when input phase voltage is lower than 198v; When the input phase voltage is equal to 160V, it will drop to 50% of the rated capacity of the voltage regulator; The voltage regulator can output two kinds of voltage at the same time: 220 V and 110 v. But even if it is all output by 110V, the load of the regulator should not exceed 50% of the rated capacity, otherwise it will be overloaded< It has strict requirements on the nature of the load equipment. It mainly uses one kind of load. If it is a mixed load, the capacity must be enlarged. Resistive load such as heating wire, electric cooker and other loads only need 0.2 times, capacitive and inctive load such as motor, large capacitor, transformer, etc At least 3-5 times of the margin of water pump and other loads depends on the actual situation of the site. For mixed loads such as motor and heating wire, the regulator must be 3-7 times of the margin. For mixed loads, it is better not to select the regulator.
5.
Address: no.619 zhonghuaxin Road, Zhabei District (near Gonghexin Road)
{rrrrrrr}
nearby bus stop
zhonghuaxin road Datong Road bus stop 185m
route: no.216
Gonghexin Road zhonghuaxin road bus stop 219M
route: No.46 bus section No.65, No.95, No.95, No.210, No.253, No.312, no.723, no.869, no.933, no.974
Zhonghua new road Gonghe new road bus stop 232m
route bus: No.95, No.95, no.216
Gonghe new road Zhonghua new road (greeting station) - bus stop 236m
route bus: No.46
Zhongxing Road Changxing road bus stop 244m
route bus Bus: No.78, NO.115, No.140, No.306, No.310, no.817, no.823, no.929, no.942, no.962, no.963
Zhijiang West Road Gonghexin Road - bus stop 358m
route bus: No.309, no.966, No.1208
Gonghexin Road Zhongxing Road - bus stop 390m
route bus: No.46, No.253, No.322, no.723, no.869, no.933, no.974
route
Zhongxing Road Gonghexin Road - bus station 444m
route bus: 78 road 115 road 140 road 306 Road 309 Road 310 road 817 road 823 road 859 road 929 road 942 road 962 road 963 road Xinchuan special line
Shanghai railway station (North Square) (lower station) - bus station 457m
route bus: 115 road Xinchuan special line
take Metro Line 1 to Zhongshan North Road
Line 4 is to get off at Shanghai railway station
6. 619 Zhonghua new road!
7. Rail Transit Line 2 - Rail Transit Line 8
42 minutes 17 km walk 684 m
walk about 10 m from Longyang Road to Longyang Road Station
take Rail Transit Line 2 (7 stops) Arrive at people's Square Station
take Rail Transit Line 8 (2 stations) to Zhongxing Road Station
walk about 680 meters to Zhabei District Central Hospital (e West)
42 minutes 17 km walk 684 m
walk about 10 m from Longyang Road to Longyang Road Station
take Rail Transit Line 2 (7 stops) Arrive at people's Square Station
take Rail Transit Line 8 (2 stations) to Zhongxing Road Station
walk about 680 meters to Zhabei District Central Hospital (e West)
Hot content