Exile road mining plot task

1. Does exile have a mining mission? It's all about where to go, killing monsters, exploding mission items and opening doors

2. The five key points of network Gold: 1. Network gold is not money, but a legal and freely traded asset recognized by all countries. 2. Network gold is not used for direct payment, which does not affect the circulation of legal tender. 3. Network gold improves the existing wealth distribution, based on the existing economic rules. 4. Online gold is the appreciation wealth on the Internet, which only needs the promotion and participation of operators and consumers without the support of companies. 5. Network gold is a circulating liquid asset purchased by operators from consumers, which is used to promote business operation, rather than an asset to replace business operation income, making its value continuously spiral.

3.

After successfully arriving at orea, we stepped into the first brand-new plot map - slave pit, where we need to kill the boss foreman crow to open the fifth chapter of the town map, gaogaota

this map is very large, in which the white puppies coming out of the wall do extremely high physical damage... Remember to evade the defense of non high HP from BD. in addition, the holy hall guard with a long axe will use the ground breaking strike. Although it is slow to raise his hand, the overall damage is also very high, which needs to be evaded

boss Crowe will use the new skill of 3.0, burst lightning, because the speed is slow, it is easy to avoid, and if it is full of reactance, the damage is not enough, so it can be easily killed

after entering the town, go straight to the next map control area. This map is relatively large, but strange things are relatively simple. There is a straight-line task in the map to find the miasma detector. Reward is a bit of talent and must be done

the boss of this map will use the smash chop. Pay a little attention not to be hard. It can be played easily. After that, he will get the boss's eyes (yes, yes, this is the key to open the high court of the holy Hall)

then enter the new map orea square, which is a well shaped map. Go straight along the road branch. After crossing the bridge, you can find the high court of the holy hall by looking for it a little

the picture of the high court of the holy hall is as big as ever... It's also very strange. Here's a walking route for you. It's going up to the top, then to the right, then to the wall, and then to the left after reaching the top. It's a square circle

basically, you can find the innocent chamber of Secrets very soon

on the dock, evil means that it is no longer qitafo's opponent. We need to go back to valklas and talk about the resurrection of the evil beast killed by us, so as to seal qitafo again

4.

1. After the clearance of the plot, the game really began. You'll get several round maps in the plot. Go to the "eternal laboratory" in Chapter 3 of merciless difficulty, talk with Zana, and then you can open the map (after completing Zana's task once in the field, you can invite the master back to hide in the world). There are 126 maps in total, and the difficulty is divided into 17 classes. It must be the lifelong pursuit of every exile to map the alien world step by step and complete the atlas of 126 maps. But be careful. If you encounter maps such as marshal hall, super abnormal affix valmi hall, you may be killed in the battlefield

be a hardworking little bee, do the master task every day, build your own hiding place and decorate your own warm nest

when one of the seven masters reaches level 3, they can be invited to build their own hiding place. The master will provide enchantment tools for players in the hiding place. Remember to use them reasonably. At the same time, with the continuous improvement of master level, more and more masters can be invited to the hiding place (2 masters at Level 3, 4 masters at level 5, 7 masters at level 7), the effect of enchantment will be better and better, and the decoration types of the selling hiding place will also increase. Therefore, don't forget to do the master's daily task every day. If you are a builder, build your own perfect hiding place

6. During fertilization, zona pellucida reaction and yolk membrane sealing can prevent multiple sperm from entering the egg
the fertilization process is roughly as follows: the secondary oocytes need to develop to the middle stage of the second meiotic division before they can fertilize. After the capacitated sperm meets the secondary oocytes at this stage, acrosome reaction occurs, releasing acrosin, dissolving the materials between cumulus cells, forming a channel. Then, it contacts with zona pellucida, Acrosin dissolves a pore in zona pellucida again. Sperm contact with yolk membrane through two channels dissolved by acrosin, and zona pellucida reacts immediately to prevent other sperm from passing through zona pellucida, which is the first barrier to prevent multiple sperm from entering into egg cells. After sperm contact with yolk membrane, they are hugged by a large number of microvilli on its surface, and then they are killed, The outer membrane of spermatozoa fuses with the yolk membrane (taking advantage of the fluidity of the cell membrane), the tail of spermatozoa falls off and the nucleus enters the egg cell. After the sperm enters the egg, the egg cell is immediately blocked by the yolk membrane (which is the second barrier to prevent polyspermy fertilization) and activated to undergo the second meiotic division and discharge the second polar body, After the second meiotic division, the nucleus formed by the egg cell is called the female pronucleus. (generally, the male pronucleus is larger than the female pronucleus). The two pronucleus are close to each other and fuse with each other. Finally, a diploid zygote (for human and most lactating animals) is formed, and the fertilization process is basically completed.
note: the fertilization process is completed in the ovict

7. I just got this recently. I transferred it from someone else. I forgot the address! The latest plan is the 1 + 4 mode ~
in order to prevent the proction safety accidents on the construction site, improve the emergency working mechanism, carry out the emergency rescue work quickly and orderly, rescue the wounded and rece the accident losses under the accident state of the project, this plan is formulated
2 risk analysis
2.1 project overview
2.2 hazard source situation
according to the characteristics of the project, the projects undertaken mainly include mechanical equipment, electrical welding, aerial work and other engineering construction. The proction safety accidents that can occur and major risk factors include high-altitude falling accident, electric shock accident, collapse accident, electric welding injury accident, vehicle fire accident, traffic safety accident, fire and explosion accident, mechanical injury accident, etc
3 emergency organization and responsibilities
3.1 emergency rescue leading group and responsibilities
(1) the project manager is the first person in charge of the emergency rescue leading group, who acts as the leader and is responsible for the command of emergency handling. The members are composed of business manager, proction manager, project secretary, chief engineer and electromechanical manager. The director of safety supervision is the first executor of emergency rescue, acting as the Deputy group leader, responsible for the specific implementation and organization of emergency handling
(2) the proction manager is the second person in charge of the emergency team for collapse accidents, the mechanical and electrical manager is the second person in charge of the emergency team for electric shock accidents, and the site manager is the second person in charge of the emergency team for large scaffolding and falling accidents, welding injury accidents, vehicle fire accidents, traffic accidents, fire and explosion accidents, and mechanical injury accidents, Responsible for the cooperation of the corresponding accident rescue organization and accident investigation<

3.2 organizations and responsibilities of the emergency response team
(1) the emergency response team is headed by the project manager, and its members are composed of the safety director, site manager, mechanical and electrical manager, project engineer, project team and subcontractors
the main responsibilities are: to organize the implementation of emergency action plan and coordinate the emergency action of relevant departments; Report the rescue progress to the headquarters in time
(2) security team: the team leader is the project secretary, and the members are the project administration department and the economic police
the main responsibilities are to guard the scene of the accident, prevent non rescue personnel from entering the scene, dredge the vehicles on the scene, maintain public order, and protect the personal safety of rescue personnel
(3) logistics support department: the team leader is the project secretary, and the members are composed of project materials department, administration department, contract department and canteen
the main responsibilities are: responsible for the mobilization of rescue equipment and equipment; Be responsible for the accommodation of all rescue workers
(4) medical rescue team: the team leader is composed of doctors from the project health center, and the members are composed of nurses from the health center and ambulance team
the main responsibilities are: to be responsible for the rescue of the wounded on site
(5) after treatment group: the team leader is the project manager, and the members are the project leading group
the main responsibilities are: to pacify the families of the victims, coordinate the implementation of the pension for the families of the victims and the hospitalization expenses of the injured; Do other aftercare work well
(6) accident investigation team: the team leader is the project manager and the leader of the responsible department of the company, and the members are the director of project safety, relevant departments of the company and relevant technical experts of the company
the main responsibilities are: responsible for the protection of the accident site and the mapping of the drawings, finding out the cause of the accident, determining the nature of the event, and proposing countermeasures, such as identifying the accident as an accident, and putting forward the handling suggestions for the person responsible for the accident
4 prevention and early warning
4.1 prevention
4.1.1 preventive measures to prevent falling from height
(1) strengthen the ecation of safety self-protection awareness and strengthen the management of the use of safety protective equipment
(2) for key parts of the project, strictly implement the on-site supervision system of safety management professionals
(3) with the progress of construction, all kinds of safety protection facilities should be improved in time, and warning signs must be set up for all kinds of shaft safety gate
(4) all kinds of scaffolds and vertical transportation equipment are not allowed to be used without acceptance after erection and installation
(5) safety professionals should strengthen the inspection of safety protection facilities, and solve the hidden dangers in time
4.1.2 prevention measures for fire and explosion accidents
(1) according to the specific situation of the construction, formulate the fire protection scheme, establish and improve the fire safety system, and strictly abide by the operating proceres
(2) flammable and explosive materials such as paint and thinner shall not be stored in the construction site
(3) the construction unit is not allowed to set up the seasoning room in the project, and is not allowed to mix the paint in the project
(4) smoking is strictly prohibited in the construction site, and the use of various open fire operations should be issued with a fire permit and supervised by a special person
(5) the operation site should be equipped with sufficient fire-fighting equipment
(6) ring the construction period, the use of various open fire operations in the project shall be approved by the fire protection department of the project management department of the construction unit, and sufficient fire-fighting materials and fire-fighting equipment shall be provided
(7) it is strictly forbidden to store oxygen cylinders and acetylene cylinders in the construction site
(8) ring construction, the distance between the oxygen cylinder and acetylene cylinder and the hot work point should be 10 meters, and the distance between the oxygen cylinder and acetylene cylinder should be more than 5 meters
(9) to carry out electric and gas welding, it is necessary to obtain the fire permit and assign special personnel to take care of it, and the construction site should be equipped with sufficient fire-fighting equipment
(10) the operation personnel must hold the work permit, apply for the fire permit at the relevant personnel of the project management department, clean up the inflammables and explosives in the operation area as required, and take measures to plug the holes that may splash and fall sparks
4.1.3 preventive measures for electric shock accidents
(1) electrical professionals should work with certificates, and non electrical professionals are not allowed to replace or repair any electrical components
(2) establish the inspection system of temporary power utilization, inspect and irregularly spot check various lines and facilities on site according to the management regulations of temporary power utilization, and file the inspection and spot check records
(3) inspectors and operators must wear insulating rubber shoes and gloves as required; Special insulation tools for electricians must be used
(4) the temporary distribution lines must be erected according to the specifications, and the overhead lines must be insulated wires, not plastic flexible wires, not bundles of overhead laying, not open laying along the ground
(5) the erection and use of temporary electricity on construction site must comply with the technical code for safety of temporary electricity on construction site (JGJ46-88)
(6) construction equipment, vehicles and personnel should keep a safe distance from the line. When the minimum distance cannot be reached, reliable protection measures must be taken
(7) the distribution system must implement hierarchical distribution. The internal setting of all switch boxes in the site must comply with the relevant regulations, the electrical appliances in the box must be reliable and intact, the type selection and setting value must comply with the relevant regulations, and the purpose of the switch electrical appliances shall be indicated. The electrical system in the switch box shall be of uniform style and configuration, the box shall be painted orange uniformly, and fences and protective sheds shall be set according to the regulations. The connection between the flow box and the upper level switch box shall be external (all electric boxes must use the procts approved by the designated manufacturer)
(8) all power distribution boxes on the construction site should be marked with the name of the box, the appellation, number and purpose of each control line
(9) the cables and wires in the distribution lines, distribution boxes and switch boxes shall be well insulated from the ground, and there shall be no damage, hard injury, exposed elevator, extrusion, corrosion, electric leakage and other hidden dangers, so as to prevent sudden accidents
(10) the independent distribution system must adopt the three-phase five wire neutral protection system, and the non independent system can adopt the corresponding neutral or grounding protection mode according to the actual situation of the site. All kinds of electrical equipment and electrical construction machinery metal shell, metal support and base must be taken reliable neutral or grounding protection according to regulations
(11) when the grounding and neutral protection methods are adopted, two-level leakage protection devices must be set to implement hierarchical protection to form a complete protection system. The selection of leakage protection device shall meet the requirements
(12) in order to ensure the on-site lighting is not interrupted in case of fire and other emergencies, the power switch and lighting switch in the distribution box must be used separately
(13) the switch box should be distributed by the distribution box. Note that one switch can not control more than two sets of electrical equipment. Each equipment shall be equipped with its own switch box. It is strictly forbidden to control more than two sets of electrical equipment (including socket) with one switch to ensure safety
(14) there should be enough space and passage for two people to work at the same time around the distribution box and switch box. Do not stack building materials and sundries beside the box
(15) all kinds of tall facilities must be equipped with lightning protection devices according to regulations
(16) the distance between distribution box and switch box shall not exceed 30 meters; The junction between the switch box and the electrical equipment it controls shall not exceed 3M
(17) the use of electric tools should comply with the relevant provisions of national standards. The power cord, plug and socket of the tool shall be in good condition, the power cord shall not be arbitrarily extended and replaced, the external insulation of the tool shall be intact, and special person shall be responsible for the maintenance and storage
(18) the lighting of construction site generally adopts 220 V power supply. During the structure construction, the pipe should be embedded in the roof construction. The temporary lighting and power supply should be wired through the pipe. The lamps must be installed according to the regulations, and the leakage protector should be installed on the side of the power supply
(19) the electric welding machine should be equipped with a separate switch. The shell of electric welding machine shall be provided with neutral or grounding protection. All electric welding machines used in the construction site must be equipped with electric shock protector. The wiring shall be crimped firmly and a reliable protective cover shall be installed. The welding handle wire shall be in place with double wires, and it is not allowed to use metal pipes, metal scaffolds, rails and structural steel bars as loop ground wires. The welding handle wire is not damaged and the insulation is good. The setting point of electric welding machine should be moisture-proof, rain proof and smash proof
4.2 information report
(1) the person who discovers the accident shall report to the team leader (deputy team leader) immediately. If it is a fire accident, you must call 119 to the public security fire department at the same time, and call 120 or 999 for first aid
(2) after receiving the alarm, the team leader informs the deputy team leader and team members to start the emergency rescue system immediately
(3) report to the local government authorities according to the type of the accident< (4) the report should include the following contents:
-- time, category, location and relevant facilities of the accident
-- contact name and telephone number, etc
5 emergency response
5.1 emergency treatment of large-scale scaffold and falling accident
5.1.1 emergency measures for large-scale scaffold with signs of deformation accident
(1) local deformation of scaffold caused by foundation settlement. The cross section of double bent is erected with eight shaped berm or cross bracing, and a group of vertical poles are erected every other row until the deformation area is discharged. The lower foot of the eight shaped berm or cross bracing must be set on a solid and reliable foundation
(2) if the deflection deformation of the cantilever steel beam on which the scaffold is rooted exceeds the specified value, the anchor point behind the cantilever steel beam shall be reinforced, and the steel beam shall be supported with steel support and U-shaped bracket, and then the roof shall be supported

8. The two mechanisms are applied to the situation of machine. That's where you know.

9.

Bus route: 620 bus, 5.7KM

1. Walk about 600m from Dawan to Dawan station

2. Take 620 bus, pass 4 stops to convention and Exhibition Center Station (also take 121 bus, 149 bus, 841 bus)

3. Walk about 470m to Chongqing International Convention and Exhibition Center

10. Looking at the flow state: the kinematic viscosity of water ν＝ 10 ^ - 6m ^ 2 / s, velocity u = 2.27m/s, characteristic length d =. 325m, calculated Reynolds number Re = 737750, it is turbulent, so it is assumed that the dynamic pressure behind the water pipe is 0, and the static pressure is the original water pressure
according to Bernoulli equation, the impact force per unit water flow is f = 0.5V ^ 2 = 2.257645n/kg
flow G= ρ UDL = 1000 * 2.27 *. 325 * 50 = 36887.5kg
total impact force F = GF = 83278.87994n