Backstage mining of Andy simulator

1. The simulator can't dig a mine. If it can, it can't dig a coin even if the mobile phone is scrapped

2. There are eight layers in the cave. If you explore the deepest cave, you can open the next layer. If you kill the magic object, you can mine. The reward is different for every layer.

3. No! There is no way to connect this! It's not a version after all! I feel that it's much more fun to play directly with the simulator on the computer than on the mobile phone.

4. Mark a
an area for ore prospecting (there are yellow ore spots on the map)
go to the corresponding coordinates when you find it
start mining (use the map to judge)
after mining
jump to mark a

5. Mining needs pickaxes. This needs gold< But gold needs money
if you don't want to play krypton gold, go to go and get some gift bags for rapid development.

6.

Cryptocurrency market is in an extreme situation. What do you think of the popularity of this kind of currency? Nowadays, cryptocurrency is very popular in the world. In fact, cryptocurrency is a kind of digital currency. However, this kind of cryptocurrency has its own defects, which makes it difficult to become a real digital currency and an important component of the world's future currency development. It can only be a transition at most, and now the cryptocurrency market is mainly used for financial operations

First, bitcoin, dogcoin

bitcoin and dogcoin are undoubtedly the most popular ones in the international market. Due to the unstable price of bitcoin a while ago, the market price has been graally reced, and dogcoin has become a new favorite to replace bitcoin in the financial market, mainly because dogcoin is represented by musk and enjoys good reputation. Therefore, the value of dog coin is rising rapidly in the near future{ RRRRR}

above, you are welcome to comment and supplement, writing is not easy, you are welcome to like and pay attention to

7. Virtual currency is very popular now. There are about several hundred kinds on the market, but not many good ones. This app of Cheng Shimadzu Network Technology Co., Ltd. is mainly launched in Cheng. I have a look at it. It's very distinctive and good
I also downloaded their app. The things in Cheng local mall are very affordable, and eating, drinking and playing are also suitable for petty bourgeoisie like us. We can get ICO currency by reading articles and doing tasks. This virtual ICO currency can be used as money, but it can't be withdrawn, but it doesn't matter. As long as it's affordable, I hope ICO currency can appreciate rapidly.

8. The day before yesterday, the fair of China International Science and Technology Exhibition Center ended, and the next one will be on June 8
China International Science and Technology Exhibition Center is located in the northeast of Madian overpass on the middle road of North Third Ring Road, with superior geographical location. It looks at the central axis road in the East and faces the Jingchang Expressway in the West. It is located at the golden intersection of Beijing's two major traffic arteries, North Third Ring Road and Jingchang expressway, with convenient transportation and direct access through the second ring road and the third ring road
bus routes:
north-south direction - Madian station (Second Ring Road to Third Ring Road) 55 road 305 road 315 road 344 branch 735 road 835 road 919 road 919 branch east-west direction - Jiande menqiao station (North Tucheng Road) 804 road 941 road 849 road
east-west direction - Madian station (North Third Ring Road) 300 road 830 road 731 road 730 Road 320 road 367 road 725 road 825 road 387 road 718 road 801 road
location description : Madian Bridge, 300m north, Road East

9. Data recovery technology: run pc-3000 program. After running pc-3000 program, the ID of the drive will be read out and a menu will be displayed to select the model of the drive to be repaired. After selecting the drive, the following menu will appear: standard mode, reread the drive ID, load LDR file from SA initialization, write memory buffer, disable reset "standard mode" when running, and fully initialize the drive, If the drive fails (the LDR file cannot be loaded or the firmware cannot be booted even though it can be loaded), the following error message will appear: error loading the moles table Error loading mole table!) If the disk (PN = 1fh) mole is unreadable, the following message will appear: error loading configuration mole Error loading configuration mole!)“ Reread the drive ID to update the data in the "model" line, which can be used for the diagnosis when the drive is started“ "Initialize from Sa" enables the drive to start with its own firmware data. If the drive starts successfully, the firmware version number will be displayed, but this process is not automatic. Using the initialize from SA command also updates the data displayed in the model line“ Load LDR file "is recommended when the driver cannot initialize itself and needs to recover firmware data“ This command is optional, similar to the "work with memory buffer" command. This command is very useful for Athena DSP series drivers, because it needs to load not only LDR files, but also RAM data copied from other drives“ "Disable reset" when the program is running means disable reset when the program is running. The default is allow reset. After selecting "standard mode", the following menu will appear: logical scan disk firmware area operation disk ID operation defect table operation self check exit "logical scan", it is to use logical parameters to test the disk surface“ After selecting this menu, the following submenu will appear: memory buffer operation firmware buffer operation loading LDR file creating LDR file security subsystem "memory buffer operation". There are submenus under memory buffer operation: read memory buffer write memory buffer. These two commands are used to read and write memory buffer respectively. This command is required when you need to start the drive using the LDR file. In fact, when using LDR file to start the drive, some firmware variables are not initialized to prevent writing to the firmware area. But this method is limited to Athena DSP series drivers“ Firmware area operation ", firmware area operation includes the following commands: check disk firmware structure SA surface detection read mole write mole read mole group write mole group SA write test repair mole decoding table rebuild spindle stop" check disk firmware structure ", output firmware mole status report. This command takes about a minute“ SA surface detection ", using UBA addressing mode to test the firmware area surface“ Read the mole and the mole to the "mxdspmod" or "mxpkrmod" directory. The first four characters of the mole name indicate the hexadecimal format of the UBA address of the sector where the mole is located. The next four characters after the colon indicate the hexadecimal format of the mole length. A column of each mole displays the location number (PN code)“ Write the mole from the "mxdspmod" or "mxpkrmod" directory“ The read mole group and write mole group commands are another way to operate on the firmware area. They allow the firmware data to be accessed using another head (if any) at the same time. Mole group files (. SMB) include all moles and the space between them. These two commands are not used to repair the hard disk, but there are some problems that may need to be solved by them“ SA write test ", load calibration data and verify the correctness of writing to the firmware area. This command is used for additional initialization after loading the LDR file“ Repair mole "is used to repair the mole with incorrect file header“ Decoding table reconstruction "is used to generate decoding table mole from defect table (mole PN = 33H)“ The "spindle stop" makes the driver enter the "sleep" mode, which is used in the heat exchange process“ Under "load LDR file", there are submenu: load ROM and mole load ROM load mole "create LDR file". Using this command, you can LDR file from a good drive. This command will run correctly only when the selected drive model matches the actual drive model. Otherwise, an error will occur or the created file will contain incorrect data and cannot be loaded“ The command "security subsystem" includes submenu: view information, display current security status and set password, clear password, prohibit data protection "disk ID operation". The command can modify the name and serial number of the drive model. These parameters are stored in the disk mole (PN = 1fh) in the drive firmware“ Under the defect table operation command, there is a submenu: View P table view g table move g table defects into P table clear g table clear P table and G table import "view P table" from ddfectoscope to report the defects recorded in P table“ In the report, "LBA (DEF)" list shows the LBA address of the defective sector, "LBA (subst)" list shows the LBA address of the substitute sector, "candidate" column shows the "candidate" defective sector. If the "candidate" column is marked with "√", then the defect is not actually written in the defect table. At this time, "LBA (subst)" and "LBA (DEF)" are the same. The capacity of table G is shown in the "capacity" line. Different series of hard disks have different capacities. For example, the capacity of table g of Athena DSP drive is 636“ Move the defects in table g into table P, and write the defects recorded in table g into table P“ Clear "g table", clear the defect records in G table“ Clear "P table and G table", clear all defect records on the drive, and reset the summary table (mole PN = 33H). If you need to keep the defect information, you can back up the mole PN = 37, 18, 78, 1b, 33, etc“ This command can add the defects found by the defect scope program to the P table or G table“ Self test mode "self test command has submenu: start self test, stop self test, view self test status

10. If you change it, you will not be able to start it, because the hardware driver is different
installation, it may be that your hard disk is set as the main hard disk, which conflicts with the priority level of the original hard disk. Adjust the hard disk and jump to become the secondary hard disk

as the landlord said: there is only one ide connector, so there is no way
solution: buy one with two interfaces, and it will be done within 15 MB.