How to mine the old router
Publish: 2021-05-22 07:18:22
1. The principle of router mining is different from that of coin mining. The essence of router mining is distributed CDN with shared bandwidth. Compared with the playing method of digital currency, the revenue of shared CDN service is stable, which is linked to the upload speed of broadband. 360, Xiaomi, Xunlei, Jirou and xinrou all have mining routes. This instry has a characteristic that the earlier you enter, the easier it is to mine and the higher the profit. You can take a look at the jCG K3 blockchain routing that is going online. JCG is an old manufacturer of intelligent routing. Compared with old mining areas, mining in new mining areas will be much easier. Moreover, it is an intelligent router equipped with blockchain technology. Besides mining, it can also be used for home use.
2. /Router (Terabit Router) has become an urgent requirement. Terabit Router Technology is still in the experimental stage
multi Wan
al WAN router has two physical Wan ports as external network access, so that the internal network computer can use two external network access lines through the load balancing function of al WAN router, which greatly improves the network bandwidth. At present, al Wan routers mainly have the application advantages of "bandwidth convergence" and "one network, two lines", which are not available in traditional single Wan routers<
3G wireless
3G wireless router adopts 32-bit high-performance instrial ARM9 communication processor, takes embedded real-time operating system RTOS as software support platform, and integrates the system
multi Wan
al WAN router has two physical Wan ports as external network access, so that the internal network computer can use two external network access lines through the load balancing function of al WAN router, which greatly improves the network bandwidth. At present, al Wan routers mainly have the application advantages of "bandwidth convergence" and "one network, two lines", which are not available in traditional single Wan routers<
3G wireless
3G wireless router adopts 32-bit high-performance instrial ARM9 communication processor, takes embedded real-time operating system RTOS as software support platform, and integrates the system
3. Now many routers can mine, but generally they can only mine one kind of mine, and the computing power is relatively small. There are also many deceptive virtual mining machines. The blockchain they say is also a pseudo blockchain, not a real blockchain
the Kangzhong iron curtain shield router ensures the security of user's signal and intelligent device data through the signal access port, and adds the consensus function of AOVA, the third public blockchain in the world. It can not only use the idle bandwidth to develop the consensus mechanism of the application end for the third-party enterprises, but also obtain the corresponding return, Moreover, it can also exchange AOVA points by acting as the data node of AOVA main chain and branch chain. It is available in Fangfang manor mall.
the Kangzhong iron curtain shield router ensures the security of user's signal and intelligent device data through the signal access port, and adds the consensus function of AOVA, the third public blockchain in the world. It can not only use the idle bandwidth to develop the consensus mechanism of the application end for the third-party enterprises, but also obtain the corresponding return, Moreover, it can also exchange AOVA points by acting as the data node of AOVA main chain and branch chain. It is available in Fangfang manor mall.
4. The risk of digital currency is very big. Now, the country does not support digital currency
5. Xiaomi route is a crystal mine, with high profits in the early days. Now it is more difficult to mine, and the profits are much less. I'm paying attention to the online jCG K3 blockchain routing. JCG is an old manufacturer of intelligent routing. Compared with the old mining area, mining in the new mining area will be much easier. Moreover, it is an intelligent router equipped with blockchain technology. Besides mining, it can also be used for home use.
6. The old router can be disassembled with some antennas or other components.
7.
The router setting steps are as follows:
1. First, connect the router with the broadband cat computer, as shown in the figure:
6. After the wireless setting is completed, click save, and then restart the router for normal use
8. Some old routers are recycled, and some old routers can be used to swipe. Digital enthusiasts are playing with the openwrt system, but no one wants the very old or too low-end routers. You can put the old routers on the Internet (such as idle fish), and some swipe enthusiasts will find them on the Internet. Some old routers are recycled, and some old routers can be used to swipe. Digital enthusiasts are playing with the openwrt system, but no one wants the very old or too low-end routers. You can put the old routers on the Internet (such as idle fish), and some swipe enthusiasts will find them on the Internet
connect to your old router
the first thing to do is connect your PC to your old router. You will need to do something to switch the router to the AP, but if it is executed in the wrong order, it may cause the router to be in a difficult state to connect. Don't worry. Even if you make a mistake, what you need to do most is to perform a hard reset on the router and restart. You can rest assured that the router will not be permanently damaged by adjusting the settings
the easiest way to make sure your router works is to disconnect your laptop from Wi Fi and plug it directly into the router's LAN port. Then log in to the IP address of your router. Usually, the default IP address of the router is printed on the label at the bottom of the router, but you can find its gateway by visiting your network control panel and browsing to the address listed by default, usually 192.168.0.1 or 192.168.1.1
this is the setting on the router. Please note that it is set to use 192.168.0.1 IP address and turn on DHCP
match the access point settings
after logging in to the router's management settings, the first thing you need to do is to adjust SSID, WPA settings, encryption type and password so that they match your new router and old router and transform them into AP (see the example below). If the security settings don't match, you won't be able to change between two different wireless networks. The channels can be the same or different. You can use tools such as inssider on your laptop to find a channel for each room
disable DHCP on the access point
next, you need to disable DHCP on the LAN interface of the AP. You can do this by browsing the network or LAN section in the configuration and disabling DHCP. This is very important. If you cannot disable DHCP on the AP, it will cause serious configuration problems. Connecting to all computers will stop working normally. DHCP allows your router to assign local IP to computers connected to the network. Since the new router is processing the connected devices and is responsible for all IP assignments of the old router, it is necessary to disable DHCP on the old router / access point
the router expands the WiFi network
assign a private IP to your access point
after DHCP is disabled, you can reconfigure the LAN interface and use a dedicated local IP address that will not conflict with the router. This is a good idea so that you can easily log in to the AP later to adjust the settings. To understand the reserved range of the new router, you should go to another computer and access its configuration. Generally, Linksys and D-Link routers use the range of 192.168.0.2 to 192.168.0.99 for reserved IP addresses.
connect to your old router
the first thing to do is connect your PC to your old router. You will need to do something to switch the router to the AP, but if it is executed in the wrong order, it may cause the router to be in a difficult state to connect. Don't worry. Even if you make a mistake, what you need to do most is to perform a hard reset on the router and restart. You can rest assured that the router will not be permanently damaged by adjusting the settings
the easiest way to make sure your router works is to disconnect your laptop from Wi Fi and plug it directly into the router's LAN port. Then log in to the IP address of your router. Usually, the default IP address of the router is printed on the label at the bottom of the router, but you can find its gateway by visiting your network control panel and browsing to the address listed by default, usually 192.168.0.1 or 192.168.1.1
this is the setting on the router. Please note that it is set to use 192.168.0.1 IP address and turn on DHCP
match the access point settings
after logging in to the router's management settings, the first thing you need to do is to adjust SSID, WPA settings, encryption type and password so that they match your new router and old router and transform them into AP (see the example below). If the security settings don't match, you won't be able to change between two different wireless networks. The channels can be the same or different. You can use tools such as inssider on your laptop to find a channel for each room
disable DHCP on the access point
next, you need to disable DHCP on the LAN interface of the AP. You can do this by browsing the network or LAN section in the configuration and disabling DHCP. This is very important. If you cannot disable DHCP on the AP, it will cause serious configuration problems. Connecting to all computers will stop working normally. DHCP allows your router to assign local IP to computers connected to the network. Since the new router is processing the connected devices and is responsible for all IP assignments of the old router, it is necessary to disable DHCP on the old router / access point
the router expands the WiFi network
assign a private IP to your access point
after DHCP is disabled, you can reconfigure the LAN interface and use a dedicated local IP address that will not conflict with the router. This is a good idea so that you can easily log in to the AP later to adjust the settings. To understand the reserved range of the new router, you should go to another computer and access its configuration. Generally, Linksys and D-Link routers use the range of 192.168.0.2 to 192.168.0.99 for reserved IP addresses.
9. Now, there are many families using wireless router and wireless network card to build LAN. However, the data transmission rate of the network using wireless routing is greatly affected by the signal strength. When the signal is not strong enough, the data transmission rate of the wireless network is often very slow, and even can not establish a connection
in actual use, we often find that the coverage of wireless signal is not as good as that in the proct description, which is disappointing. Because in actual use, the signal will be affected by some objective factors such as the environment and appear attenuation, which is inevitable. Of course, for signal attenuation, we are not at a loss. When using it, we can use some techniques to minimize the signal attenuation< First, the position of wireless router should be placed reasonably. In our family's house, there are many reinforced concrete walls, so when we place wireless routers, we should make the signal pass through the wall as little as possible
taking the family structure as an example, we seldom surf the Internet in the kitchen or dining room, and the study and bedroom are the places where we often surf the Internet, so when we choose the location of the wireless router, we can choose to be far away from the kitchen and dining room, and close to the study and bedroom as far as possible<
reasonably select the location of wireless router
the external wall of the study is the ideal location for wireless router, which can make the living room, study, master bedroom and secondary bedroom have a better wireless signal. Of course, different family structures are not the same, we should depend on the specific situation. Generally speaking, the client of wireless network card has the ability to detect the signal strength. You can check the signal strength around the room with your notebook, so as to choose the best place. In addition, you can also install the network stumper software to detect the strength of the signal
Second, modify the signal channel to rece interference
we will see the wireless channel options in the configuration interface of the wireless router. Generally speaking, there are 11 54m wireless channels, which are channel 1 to channel 11 in turn. When multiple wireless signals are using the same wireless signal channel, signal interference will appear
after purchasing a wireless router, many users do not modify the wireless signal channel, so that everyone uses the default configuration channel of the router, which is prone to channel interference. If there is a neighbor nearby using the same channel as ours, then the wireless signals of both sides will be affected
modify the wireless channel to rece interference
we can also use the network stapler software to scan to see which wireless signals exist nearby and which channel is used. Then we modify our own wireless channel to avoid repetition with other channels
in addition, we should pay attention to the fact that the signal of one channel will interfere with two adjacent channels at the same time, that is, the signal of channel 6 will affect channel 5 and channel 7, so when we set up the wireless channel, we should try our best to make our channel more than two away from other signal channels
in addition, many household appliances will cause electromagnetic interference to the wireless network when they are working, so the placement of wireless routers should also be far away from these household appliances< Third, extend the antenna to enhance the signal
because the size of the antenna gain directly affects the transmission strength and reception capacity of the signal, and some routers in the market use a detachable antenna design, so replacing a high gain antenna for the wireless router is the most direct way to enhance the signal. There are many gain antennas in the market, and the price is also cheap. However, it is worth noting that when you buy it, you should ask whether it is omni-directional antenna or not. Otherwise, directional antenna can only transmit wireless signals in one direction
in addition, we can also expand the antenna of the wireless network card, but the antenna of the wireless network card is generally not detachable, and it is troublesome to replace. In fact, many small things in life can enhance the wireless network signal. There are also many ways of DIY wireless network gain antenna on the network, such as the use of milk powder can, mosquito coil disk, leaky spoon and so on. Interested users may as well have a try
these techniques mentioned in this paper can improve the signal strength to a certain extent, but the actual transmission power of the router itself is the most critical. Of course, readers do not have to worry about the purchase of a wireless router at home is not easy to use. At present, the standard speed of the mainstream wireless router in the home is 54Mbps. If the broadband access in our home is ADSL, it is generally 2m, while the shared bandwidth of the broadband in the community is generally 10m. Even if the signal strength does not reach 100%, its transmission rate can meet the Internet needs of the general home users.
in actual use, we often find that the coverage of wireless signal is not as good as that in the proct description, which is disappointing. Because in actual use, the signal will be affected by some objective factors such as the environment and appear attenuation, which is inevitable. Of course, for signal attenuation, we are not at a loss. When using it, we can use some techniques to minimize the signal attenuation< First, the position of wireless router should be placed reasonably. In our family's house, there are many reinforced concrete walls, so when we place wireless routers, we should make the signal pass through the wall as little as possible
taking the family structure as an example, we seldom surf the Internet in the kitchen or dining room, and the study and bedroom are the places where we often surf the Internet, so when we choose the location of the wireless router, we can choose to be far away from the kitchen and dining room, and close to the study and bedroom as far as possible<
reasonably select the location of wireless router
the external wall of the study is the ideal location for wireless router, which can make the living room, study, master bedroom and secondary bedroom have a better wireless signal. Of course, different family structures are not the same, we should depend on the specific situation. Generally speaking, the client of wireless network card has the ability to detect the signal strength. You can check the signal strength around the room with your notebook, so as to choose the best place. In addition, you can also install the network stumper software to detect the strength of the signal
Second, modify the signal channel to rece interference
we will see the wireless channel options in the configuration interface of the wireless router. Generally speaking, there are 11 54m wireless channels, which are channel 1 to channel 11 in turn. When multiple wireless signals are using the same wireless signal channel, signal interference will appear
after purchasing a wireless router, many users do not modify the wireless signal channel, so that everyone uses the default configuration channel of the router, which is prone to channel interference. If there is a neighbor nearby using the same channel as ours, then the wireless signals of both sides will be affected
modify the wireless channel to rece interference
we can also use the network stapler software to scan to see which wireless signals exist nearby and which channel is used. Then we modify our own wireless channel to avoid repetition with other channels
in addition, we should pay attention to the fact that the signal of one channel will interfere with two adjacent channels at the same time, that is, the signal of channel 6 will affect channel 5 and channel 7, so when we set up the wireless channel, we should try our best to make our channel more than two away from other signal channels
in addition, many household appliances will cause electromagnetic interference to the wireless network when they are working, so the placement of wireless routers should also be far away from these household appliances< Third, extend the antenna to enhance the signal
because the size of the antenna gain directly affects the transmission strength and reception capacity of the signal, and some routers in the market use a detachable antenna design, so replacing a high gain antenna for the wireless router is the most direct way to enhance the signal. There are many gain antennas in the market, and the price is also cheap. However, it is worth noting that when you buy it, you should ask whether it is omni-directional antenna or not. Otherwise, directional antenna can only transmit wireless signals in one direction
in addition, we can also expand the antenna of the wireless network card, but the antenna of the wireless network card is generally not detachable, and it is troublesome to replace. In fact, many small things in life can enhance the wireless network signal. There are also many ways of DIY wireless network gain antenna on the network, such as the use of milk powder can, mosquito coil disk, leaky spoon and so on. Interested users may as well have a try
these techniques mentioned in this paper can improve the signal strength to a certain extent, but the actual transmission power of the router itself is the most critical. Of course, readers do not have to worry about the purchase of a wireless router at home is not easy to use. At present, the standard speed of the mainstream wireless router in the home is 54Mbps. If the broadband access in our home is ADSL, it is generally 2m, while the shared bandwidth of the broadband in the community is generally 10m. Even if the signal strength does not reach 100%, its transmission rate can meet the Internet needs of the general home users.
Hot content