Setting of mining address and port of yuanbaocoin
Publish: 2021-05-20 22:07:38
1. Don't dig any mine with a single graphics card. All the mining owners dig together with dozens or hundreds of graphics cards. And now there is no one to dig in the mine. All the mining owners have changed hands on the graphics cards. Taobao has a lot of them. The money you earn from mining is not enough to pay the electricity bill.
2. Yuanbao can't be changed into Yuanbao directly, but it can be bought into props and then traded to other people to get game currency. Yuanbao has gold Yuanbao, silver Yuanbao pays wages, and silver Yuanbao uses RMB to offset Guangyu B. what's more, both gold Yuanbao and silver Yuanbao can buy virtual props in the game. The difference is, Jinyuanbao can trade silver. You can only use jinyuanbao and yinyuanbao to buy virtual props in the game and sell them to other people in game currency. However, to trade these props, you must be above level 40 or a member, otherwise you can't trade them
3. Yes, but if you get in early and earn money early, you can get my own money,.
4. Mining is very harmful to the graphics card, and the money earned is not enough for the cost
5. In the new area, if we dig out high-quality minerals and timber, we can still sell Yuanbao,
6. In this case, you must first search the address of the
proxy server in the network. After searching, it will show you the address and port of the proxy server. Generally, if you want to browse the web page for proxy, you can find the Internet option in the
tool
tab of
IE browser, and then click the LAN option, You can
set the proxy server
proxy server in the network. After searching, it will show you the address and port of the proxy server. Generally, if you want to browse the web page for proxy, you can find the Internet option in the
tool
tab of
IE browser, and then click the LAN option, You can
set the proxy server
7. The implementation of NAT mapping port
outside the network (Internet) access to the internal proxy server
e to the limited IP address of the public network, many ISPs adopt the method that multiple intranet users share an Internet on the public IP through proxy and gateway routing, which limits these users to set up personal websites on their own computers, The most critical point is how to map the intranet IP of multiple users with the only IP they share online! Just like in the LAN or Internet bar, although you can set up multiple servers and websites, you still have only one external IP address for the external network. How to map the IP address of the external network to the corresponding IP address of the internal network is what the proxy server or gateway router of the internal network should do, For our users who use private IP address, that is to say, this is the service that our access ISP service providers (China Telecom, Unicom, Netcom, Tietong, etc.) should provide, because the implementation of this technology is a little work for them, but it is more difficult for us, and it can only be realized with the support of the system administrator. Because all these settings must be done on the proxy server
to achieve this, you can use the port mapping function of Windows 2000 server. In addition, winroute Pro also has this function, and there are various enterprise level firewalls. For ordinary users like us, I'm afraid Windows 2000 server is the most convenient
let's first introce NAT. Nat (network address translation) is a technology that maps one IP address domain to another, so as to provide transparent routing for terminal hosts. Nat includes static network address translation, dynamic network address translation, network address and port translation, dynamic network address and port translation, port mapping and so on. Nat is often used in the conversion of private address domain and public address domain to solve the problem of IP address shortage. After NAT is implemented on the firewall, the internal topology of the protected network can be hidden, and the security of the network can be improved to a certain extent. If reverse NAT provides dynamic network address and port translation function, it can also achieve load balancing and other functions
the port mapping function enables a machine in the internal network to provide www services to the outside. This is not to transfer the real IP address directly to the host providing www services. In this case, there are two blind ends. One is that the internal machine is not secure, because the external network can access all functions of the machine through the address translation function except www; Second, when multiple machines need to provide this kind of service, there must be the same number of IP addresses for conversion, so that the purpose of saving IP addresses can not be achieved. The function of port mapping is to map the false IP address of a host to a true IP address. When the user accesses a port of the host providing the mapping port, the server will transfer the request to the host providing the specific service of the internal host; With the port mapping function, multiple ports of a real IP address machine can be mapped to different ports on different internal machines. Port mapping function can also complete some specific proxy functions, such as proxy pop, SMTP, telnet and other protocols. Theoretically, it can provide more than 60000 port mappings, which I'm afraid we'll never use up
first, let's introce how to share the Internet through NAT and how to use NAT to realize port mapping
1. On Windows 2000 server, enter the "routing and remote access" service from the management tool, right-click on the server, and click "configure and enable routing and remote access"
2. Click "next"
3. Select "Internet connection server", Let the intranet host access the Internet through this server.
(it's better to configure NAT sharing first, so that the intranet host can access the Internet normally. Otherwise, it's a bit troublesome to configure NAT sharing after configuring the port mapping. If not, NAT can't be shared.)
4. Select "router with network address translation (NAT) routing protocol" instead of "set Internet connection sharing (ICS)". (the difference between ICs and NAT is that it is easy to use. To enable ICs, you only need to select a check box, while to enable NAT, you need more configuration tasks, The reason why ICs is used in small networks is that it needs a fixed IP address range for internal hosts; For communication with external network, it is limited to a single public IP address; It only allows a single internal network interface.)
5. Let's talk about my network situation first:
Internet connection 192.200.200.3 (it's also an internal address, no way, Tietong's network is not very good, the network speed is not fast, the price is expensive, and my life is really hard)
dormitory connection 192.168.0.1 (there is a LAN in the dormitory, a total of four computers, one of which is equipped with a web server made of sambar 5.1b5, The web port is 80. Later, you can visit the 192.168.0.2:80 web page from the Internet (use 192.200.200.55 instead)
IIS 5.0 is opened on this NAT host, and the port is 80. Use the port mapping method to map port 8081 to port 80 of internal host 192.168.0.2
6. In the routing and remote access server installation wizard, select "Internet connection" (the connection to the Internet) and click "next"
7. Select "finish"
so far, the NAT sharing setting is completed, and the internal host can also access the Internet. The network settings of the internal host are as follows:
IP address range is 912.168.0.2 ~ 192.168.0.254, subnet mask is 255.255.255.0, gateway is 192.168.0.1, DNS is the address given by ISP, ours is 211.98.xxx.xxx
2. Use NAT to map ports
1. Add NAT protocol. Right click "general", - "new routing protocol"
2. Select "network address translation (NAT)" in "new routing protocol", and click "OK"
3. In this way, there will be another "network address translation (NAT)" in "IP routing"
4. Right click "network address translation (NAT)" to add "new interface"
5 Select "Internet connection" in "new interface of network address translation (NAT)"
6. Select "public interface to connect to Internet" in "network address translation - internet connection properties" and select "convert TCP / UDP header (recommended)"
7; Address pool & quot; Add the start address and end address of the port redirection you need to provide in the options table. (also
7,
are all the IP addresses you need to take out for port mapping. Generally, we only have one IP address, so we don't need to talk about the differences of "address pool" later. Suppose there are 8 addresses, which are set as follows:
after adding:
8. In & quot; Special port & quot; The options table provides the data connection protocol that you need to direct (TCP or UDP protocol, such as web and FTP is TCP protocol). After selecting "add"
9 "add special port", this is the core of setting port mapping, which port of NAT host is mapped to which port of intranet host is set here, So you can add any address in the "address pool" to the "public address". Here you add "192.200.200.3", that is,
is my address. If you did not set "address pool" in the front, then "here address pool item" in this option page is gray and not optional. You can only select "here interface",
that is, you only have one public IP address, which is more suitable for friends who only have one IP address. You can not use the "address pool". Why do you need to make rendant settings? If there's a problem, it's not asking for trouble
"incoming port" refers to the port that someone accesses the NAT server with public IP from outside the network. Here, it is set as 8080
"private address and outgoing address" refers to the IP address of the internal host and the port providing special services. Here, port 8080 on 192.200.200.3 is mapped to 192.168.0.2
outside the network (Internet) access to the internal proxy server
e to the limited IP address of the public network, many ISPs adopt the method that multiple intranet users share an Internet on the public IP through proxy and gateway routing, which limits these users to set up personal websites on their own computers, The most critical point is how to map the intranet IP of multiple users with the only IP they share online! Just like in the LAN or Internet bar, although you can set up multiple servers and websites, you still have only one external IP address for the external network. How to map the IP address of the external network to the corresponding IP address of the internal network is what the proxy server or gateway router of the internal network should do, For our users who use private IP address, that is to say, this is the service that our access ISP service providers (China Telecom, Unicom, Netcom, Tietong, etc.) should provide, because the implementation of this technology is a little work for them, but it is more difficult for us, and it can only be realized with the support of the system administrator. Because all these settings must be done on the proxy server
to achieve this, you can use the port mapping function of Windows 2000 server. In addition, winroute Pro also has this function, and there are various enterprise level firewalls. For ordinary users like us, I'm afraid Windows 2000 server is the most convenient
let's first introce NAT. Nat (network address translation) is a technology that maps one IP address domain to another, so as to provide transparent routing for terminal hosts. Nat includes static network address translation, dynamic network address translation, network address and port translation, dynamic network address and port translation, port mapping and so on. Nat is often used in the conversion of private address domain and public address domain to solve the problem of IP address shortage. After NAT is implemented on the firewall, the internal topology of the protected network can be hidden, and the security of the network can be improved to a certain extent. If reverse NAT provides dynamic network address and port translation function, it can also achieve load balancing and other functions
the port mapping function enables a machine in the internal network to provide www services to the outside. This is not to transfer the real IP address directly to the host providing www services. In this case, there are two blind ends. One is that the internal machine is not secure, because the external network can access all functions of the machine through the address translation function except www; Second, when multiple machines need to provide this kind of service, there must be the same number of IP addresses for conversion, so that the purpose of saving IP addresses can not be achieved. The function of port mapping is to map the false IP address of a host to a true IP address. When the user accesses a port of the host providing the mapping port, the server will transfer the request to the host providing the specific service of the internal host; With the port mapping function, multiple ports of a real IP address machine can be mapped to different ports on different internal machines. Port mapping function can also complete some specific proxy functions, such as proxy pop, SMTP, telnet and other protocols. Theoretically, it can provide more than 60000 port mappings, which I'm afraid we'll never use up
first, let's introce how to share the Internet through NAT and how to use NAT to realize port mapping
1. On Windows 2000 server, enter the "routing and remote access" service from the management tool, right-click on the server, and click "configure and enable routing and remote access"
2. Click "next"
3. Select "Internet connection server", Let the intranet host access the Internet through this server.
(it's better to configure NAT sharing first, so that the intranet host can access the Internet normally. Otherwise, it's a bit troublesome to configure NAT sharing after configuring the port mapping. If not, NAT can't be shared.)
4. Select "router with network address translation (NAT) routing protocol" instead of "set Internet connection sharing (ICS)". (the difference between ICs and NAT is that it is easy to use. To enable ICs, you only need to select a check box, while to enable NAT, you need more configuration tasks, The reason why ICs is used in small networks is that it needs a fixed IP address range for internal hosts; For communication with external network, it is limited to a single public IP address; It only allows a single internal network interface.)
5. Let's talk about my network situation first:
Internet connection 192.200.200.3 (it's also an internal address, no way, Tietong's network is not very good, the network speed is not fast, the price is expensive, and my life is really hard)
dormitory connection 192.168.0.1 (there is a LAN in the dormitory, a total of four computers, one of which is equipped with a web server made of sambar 5.1b5, The web port is 80. Later, you can visit the 192.168.0.2:80 web page from the Internet (use 192.200.200.55 instead)
IIS 5.0 is opened on this NAT host, and the port is 80. Use the port mapping method to map port 8081 to port 80 of internal host 192.168.0.2
6. In the routing and remote access server installation wizard, select "Internet connection" (the connection to the Internet) and click "next"
7. Select "finish"
so far, the NAT sharing setting is completed, and the internal host can also access the Internet. The network settings of the internal host are as follows:
IP address range is 912.168.0.2 ~ 192.168.0.254, subnet mask is 255.255.255.0, gateway is 192.168.0.1, DNS is the address given by ISP, ours is 211.98.xxx.xxx
2. Use NAT to map ports
1. Add NAT protocol. Right click "general", - "new routing protocol"
2. Select "network address translation (NAT)" in "new routing protocol", and click "OK"
3. In this way, there will be another "network address translation (NAT)" in "IP routing"
4. Right click "network address translation (NAT)" to add "new interface"
5 Select "Internet connection" in "new interface of network address translation (NAT)"
6. Select "public interface to connect to Internet" in "network address translation - internet connection properties" and select "convert TCP / UDP header (recommended)"
7; Address pool & quot; Add the start address and end address of the port redirection you need to provide in the options table. (also
7,
are all the IP addresses you need to take out for port mapping. Generally, we only have one IP address, so we don't need to talk about the differences of "address pool" later. Suppose there are 8 addresses, which are set as follows:
after adding:
8. In & quot; Special port & quot; The options table provides the data connection protocol that you need to direct (TCP or UDP protocol, such as web and FTP is TCP protocol). After selecting "add"
9 "add special port", this is the core of setting port mapping, which port of NAT host is mapped to which port of intranet host is set here, So you can add any address in the "address pool" to the "public address". Here you add "192.200.200.3", that is,
is my address. If you did not set "address pool" in the front, then "here address pool item" in this option page is gray and not optional. You can only select "here interface",
that is, you only have one public IP address, which is more suitable for friends who only have one IP address. You can not use the "address pool". Why do you need to make rendant settings? If there's a problem, it's not asking for trouble
"incoming port" refers to the port that someone accesses the NAT server with public IP from outside the network. Here, it is set as 8080
"private address and outgoing address" refers to the IP address of the internal host and the port providing special services. Here, port 8080 on 192.200.200.3 is mapped to 192.168.0.2
8. 192.168.01 192.168.0.2
9. First of all, you need to have the IP address of the proxy server. If you search the free proxy server on the Internet, there will be a lot of them. Or you can go to the Yalu River proxy forum, where there are many proxy server addresses of that day
after finding the IP address of the proxy server, right-click the Internet properties -- connection -- LAN settings -- proxy server option to check it and fill in the IP address you got. The proxy server you get should be 128.4.36.11:3127, where 128.4.36.11 is the IP address and 3127 is the port number. Fill 128.4.36.11 before colon in address, 3127 in port and click OK
(this proxy may not work. You need to search the Internet to find something that can be used. Because the proxy server generally does not exist for a long time, you need to test whether it can be used at any time.)
after finding the IP address of the proxy server, right-click the Internet properties -- connection -- LAN settings -- proxy server option to check it and fill in the IP address you got. The proxy server you get should be 128.4.36.11:3127, where 128.4.36.11 is the IP address and 3127 is the port number. Fill 128.4.36.11 before colon in address, 3127 in port and click OK
(this proxy may not work. You need to search the Internet to find something that can be used. Because the proxy server generally does not exist for a long time, you need to test whether it can be used at any time.)
Hot content