Mining setting of Mingyu mine
How to access BIOS from mainboard: after turning on the computer, when you see the boot screen, press & quot; on the keyboard continuously; ESC" Key to enter the BIOS
BIOS is English & quot; Basic Input Output System" After literal translation, the Chinese name is & quot; Basic input output system & quot;. In fact, it is a set of programs solidified to a ROM chip on the main board of the computer. It stores the most important basic input and output programs of the computer, post boot self check program and system self boot program. It can read and write the specific information of system settings from CMOS. Its main function is to provide the most direct hardware setting and control for the computer
-
press the shortcut key F11 to select the startup item when the main board is turned on
-
after continuously pressing the shortcut hot key F11, you will enter a window for selecting the sequence of startup items
-
after entering, the second option to move the cursor is "U disk startup", while the first option is "computer local hard disk startup"
-
when you move the cursor to the option position of the U disk, you can directly press enter to start the U disk
Advanced chipset features
set the hard disk mode to AHCI mode
Advanced BIOS features
set the boot order
or find the boot option # 1 under the startup option in the BIOS interface to set the U disk as the first boot item
mine is like this:
1. Select advanced mode advanced CPU configuration
2. Set inter virtualization technology to enabled, save and exit,
The method is as follows:
1. When the mainboard boot screen appears, press ESC to enter the mainboard BIOS setting interface
2. Use the direction key to move the cursor to the "boot" column, then use the up and down direction keys to move the cursor to the "hard disk drives" item, and press enter to confirm the execution
3. Then use the up and down direction keys to move the cursor to the "1st drive" option, press enter to open the startup selection interface small window, select the U disk item, confirm the selection, and press F10 to save, exit and restart the computer
reminder: overclocking will increase the heat of CPU. Can the original CPU fan cope with it; Don't be in a hurry for overclocking. If the external frequency of 10MHz is added slowly, too much overclocking will lead to no power on, feign death and burning of hardware. In case of no power on, please turn off the power, open the chassis cover, remove the button on the motherboard, install the battery for more than 10 minutes, and then boot it into the BIOS to reset the parameters. In short, it is not recommended for novices to exceed 20% of the default main frequency.
-
Press del to enter the BIOS setting interface and select advanced BIOS features
-
in the advanced BIOS features interface, first select the hard disk boot priority
-
hard disk boot priority selection: use the plus and minus sign "+, -" on the keypad to select the mobile device, and select the U disk on the top. Then, press ESC to exit and return to the setting interface in the figure above
-
select the first boot device again: there are no usb-hdd, usb-zip and other options in this version of BIOS. After trying to select the mobile device "removable" can't start, but select "hard disk" can start the computer