ASUS z87pro mining setup

1. There's no need to turn it off too much. Just turn it to automatic

2.

Dear ASUS users, Hello

you can refer to the following BIOS settings:

hope the above information can help you, thank you. Thank you for your support and attention to ASUS. I wish you a happy life< br />

3.

Dear ASUS users,

suggestions are as follows:

1) two or more hard disks of the same specification are connected to the Yellow SATA interface of the motherboard, and coffee color is not supported

2) turn on the computer to enter the BIOS and change the SATA to the raid mode

3) when the computer restarts the self-test, press the keyboard's Ctrl + I to enter the raid setting menu or set. First, create the raid, and then follow the prompts. It is recommended that you refer to the manual

after setting up the raid:

install the windows system, connect the USB disk with the RAID driver to the USB interface, and then load the driver when installing, just follow the prompt steps

I hope the above information can help you, thank you. If the above reply still does not help you solve your problem, you are welcome to continue to ask. You can also log in to ASUS online instant service: http://www.asus.com.cn/support/ Thank you for your support and attention to ASUS. I wish you a happy life

4.

The above four USB 3.0 ports are provided by the asmedia USB 3.0 chip, so the asmedia USB 3.0 driver needs to be installed:

the following two USB 3.0 ports are native, and can be used after installing the Intel USB 3.0 driver

you need to install the driver marked in the red box below:

5.

After the ASUS motherboard can be turned on, click del to enter the BIOS interface

after entering the BIOS interface, you can restore the BIOS factory settings in the following two ways:

1. Click F9 and the following interface will appear. Press enter

after restoring the default settings, click F10 to save and exit the BIOS interface

6. Press del to enter the BIOS of the motherboard and find these options. Advanced (configuration) --- CPU configuration (setting) = = = = = Intel virtual (virtualization) technology is set to enabled, save to exit, or secure virtual machine mode is set to enabled. Save to exit.

7. ASUS z87-k motherboard can open VT through system
agent
configuration option in BIOS. The specific setting steps are as follows:
1. Press "del" or "F2" to enter BIOS after power on
2. In the advanced options page, find system
agent
configuration and select enter
3. After entering system
agent
configuration, set vt-d option to enabled
after setting, click F10 to save the settings in BIOS, and the machine will restart automatically.

8. Dear ASUS users,

is the fault code of the motherboard, which can be found in the fault code list of your motherboard manual. Then remove the fault,

your 30 is either a fault or wakes up from S3 mode, normal, don't worry

9. Meter display, nuclear display automatic shielding

10. Not extreme enthusiasts, you enter the BIOS, find OC overclocking, set the frequency multiplier to 43