Ore washing machine

1.

In the instrial "beating and washing process"

1. pulverizing, one ore is put into the pulverizer, which consumes EU and time, and turns into two crushed ores, increasing proction by two times as much as the original one, Some small pieces of powder (9 small pieces of powder, a powder, a furnace to burn powder into an ingot), and a stone powder (which can be used as building foam)

2. centrifugation, and put 1 pure crushed ores into the heat centrifuge (must give the centrifuge red stone signal, or it will consume a lot of time). It still consumes EU and time, and becomes a powder, a handful of powder (except uranium mine). It will become uranium 238 and 235)

3. @ ztw0_ 0
   

2.

1、 Steps:

1, the use of the pump needs to dig a pool out first, and put water on it

3. Ore washing machine: further increase mineral proction (increase by 44.4%), obtain stone powder and Xiaocuo sulfur powder
centrifuge: centrifuge copper powder to get small piles of gold powder and nickel powder; The ruby powder and mercury unit were obtained by centrifuging the ruby; Helium unit and rutile were obtained by centrifuging fluorite, nickel and copper were obtained by centrifuging gold powder
the difference between the two:
1. The latter consumes more electric ore washing machine. In short, it uses water to clean the crushed ore to proce pure powder (Elemental) and impurities (also elemental minerals)
2. The former needs water to proce pure ore powder and impurities
my world instry is an open game, which can use very simple materials to make many strange modern works, such as using the most natural rubber to make batteries and other instries.

4. The washing equipment depends on how you wash the ore. if you wash the ore, the raw materials should not be too large. You can directly use a spiral washing machine or a high-frequency screen, vibrating stone washing machine, spiral chute, shaker, etc. different raw materials have different washing methods. When washing the ore, you should choose the equipment according to the output

5. First of all, you need to determine the mud content of your stone. If the mud content is large, you can use spiral washer or roller washer. If it is small, you can directly use a vibrating washer. It is cheap and has large output.

6. Washing machine is a large-scale equipment used to clean ore in black and non-ferrous metallurgical mines, iron and steel, metallurgy, chemical instry and building materials. It is divided into spiral washing machine and cylinder washing machine. Ore washing is the process of removing clay material from ore; It is widely used in phosphate and iron ore washing and desliming instry. It is set before crushing, gravity separation, magnetic separation and flotation operation to eliminate the influence and harm of slime on these operations, improve operation efficiency and obtain good separation index. Ore washing machine is a large-scale equipment used in black and non-ferrous metallurgical mines, iron and steel, metallurgy, chemical instry and building materials to clean ores and stones. The ore washing machine has a large processing capacity and is an ideal equipment for enterprises that meet the requirements of high proctivity on the cleanliness of ores and stones. Ore washing can avoid the blockage of crushing and screening equipment by slimes in raw materials containing slime. If raw materials contain soluble useful or harmful components, ore washing should also be carried out
ore washing machine: pictures of ore washing machine, my world's ore washing machine, stone washing machine equipment, ore washing machine can wash sand, no, Nanning second-hand mechanical ore washing machine, automatic spiral ore washing machine, mucus technology automatic ore washing machine, how to use ore washing machine in my world, instrial 2 ore washing machine, double spiral groove ore washing machine, big stone washing machine video, new stone washing machine, roller ore washing machine, small stone washing machine, Vibration washer, cylinder washer, Guangxi double screw washer, washer price, single screw washer
how much is the washer drawing, what brand is the B2B platform effect, go-fair drawing, how to set the price structure diagram of the three major overseas foreign trade video stations, manufacturer quotation schematic diagram, video marketing platform schematic diagram price, gofair North American market manufacturer ranking setting.

7. What are the differences among the stone washing machine, ore washing machine, washing machine and sand washing machine of Limai machinery? The spiral ore washing machine relies on the principle that the solid particles are different in size and specific gravity, so the settling speed in the liquid is different. The fine ore particles float in the water and overflow, and the coarse ore particles sink at the bottom of the tank. Cylinder stone washer is mainly used for desliming of artificial aggregate less than 80mm. It has the advantages of large feed particle size and low mud content of aggregate after washing. The wheel bucket sand washer has the advantages of high cleaning degree, reasonable structure, large capacity, low power consumption, less sand loss in the sand washing process, especially the transmission part of the sand washer is isolated from water and sand, so the failure rate is very low.

8.

1、 Sorting

sorting is a mineral processing method to separate useful minerals and gangue minerals by using the physical properties of ore, such as surface characteristics, optical properties, electrical properties, magnetic properties, radioactivity and the absorption and reflection ability of ore to rays. Sorting is mainly used for the separation of massive and granular materials, such as removing large waste rock or picking out large rich ore. The upper limit of separation particle size is 250-300 mm, and the lower limit is 10 mm. For some precious minerals (such as diamond), the lower limit is 0.5-1 mm. For the separation of non-metallic minerals, sorting can be used to preconcentrate or obtain final procts. It has the following advantages: it can partly replace the selective mining method with low efficiency and high cost; Large pieces of waste rock are removed in advance to save the transportation, crushing, grinding and mineral processing costs of waste rock; Improve the grade of ore and the content of useful minerals; The waste rock can be used for backfilling and building materials to rece its environmental pollution

sorting can be divided into three ways: flow sorting (continuous sorting), partial sorting (heap sorting) and block sorting. Flow separation is to make a certain thickness of material layer continuously pass through the detection area; Partial separation and block separation means that one ore or one ore passes through the detection area alone. The quality of block selection or partial selection is better. At present, block selection is the main method in instry. There are two types of block picking: manual picking and mechanical picking

Manual sorting

according to the appearance characteristics (color, luster, shape, etc.) between ore and waste rock, ore or waste rock can be sorted out by hand, and can be divided into forehand sorting (picking useful minerals from ore) and backhand sorting (picking waste rock from ore). It is mainly used for the separation of some ores which are difficult to be sorted by mechanical methods or whose quality can not be guaranteed. For example, asbestos with long fiber and massive mica are selected from ore; Large gangue is picked out from kaolinite of coal measures. Hand picking is the simplest way of picking, but it has high labor intensity and low efficiency

2. Mechanical sorting γ According to the difference reflected by radiation or the difference of natural radiation ability of ore, the separation of ore and gangue is realized by means of instrument. For example:

radioactive sorting: associated ores containing uranium and thorium elements

ray absorption sorting: coal, iron and chromium ores

luminescent sorting: diamond, fluorite, scheelite and asbestos

photoelectric sorting: gypsum, talc, asbestos, marble, limestone, magnesite, wolframite, diamond

electromagnetic sorting: metal sulfide ore and oxide ore

With the development of modern science and technology, especially the application of electronic computer, the mechanical sorting is becoming more and more perfect, the efficiency is greatly improved, and the application field is graally expanded. At present, photoelectric sorting is more commonly used in the non-metallic ore instry with mature equipment

Fig. 2-1 mechanical picking principle diagram

Mechanical picking principle is shown in Fig. 2-1. The ore to be selected falls into the radiation area proced by the radioactive body evenly through the vibrating chute. Different physical signals will be generated after the ores of different properties are irradiated. The detector will send the detected signals to the information processing system, which will amplify and identify the signals, and finally send the command signal to the actuator, The actuator can divide the material into useful ore and waste rock. Generally, the high-speed air valve with up to 300 times per second is used in the actuator, which greatly improves the proction efficiency. The modern electronic technology is used as the control system with high degree of automation. The modern sorting machine has become a high-tech mineral processing equipment with camera, computer and so on

Friction ore washing is a kind of technology to treat the ore which is stuck with clay or contains more mud, including crushing and separation. For non-metallic minerals such as quartz and feldspar, after long-term weathering, the primary ore deposits exposed on the surface are wrapped by the decomposition procts of clay minerals or rocks, forming cemented or argillaceous bodies. In this case, the method of friction washing and disintegration, which is different from ore crushing, is often used to separate mineral monomers before separation, which can not only remove the surface adhesion of mineral particles, but also prevent unnecessary crushing or over crushing. Usually, minerals are soaked and washed in water medium, supplemented by mechanical agitation (adding dispersant if necessary). With the help of friction between minerals, mineral particles adhered by slime are separated from clay impurities, which is called friction washing. The surface of some weathered or primary fine-grained non-metallic minerals can be purified by friction washing to expose the surface which can reflect the properties of the ore itself. After the impurities are removed, not only the mineral particles themselves can be purified, but also the conditions for the subsequent purification operation (such as flotation) can be improved. Scrubbing (ore scrubbing) can not only be used as the preparation for other purification operations, but also complete the purification of minerals separately

Fig. 2-2 friction ore washing machines are mainly friction ore washing machines, cylinder ore washing machines, trough ore washing machines, etc. In addition, the double screw scrubbing machine is often used in the scrubbing and purification of some non-metallic minerals such as quartz and diatomite. The structure of friction washer is shown in Figure 2-2

9. At present, the mining cost of bitcoin has approached or even exceeded the price of bitcoin, and retail investors have graally launched the historical stage of mining. There is still a certain profit margin for large mines. If retail electricity is free, it is also profitable. Now mining depends on electricity price and energy consumption of mining machinery. In today's uncertain future of bitcoin, it is not recommended to buy mining machines for mining, but if you have firm confidence in the future of bitcoin, it depends on your own choice

the well-known mining machines are Avalon mining machine, ant mining machine and Ajie mining machine. But trust me.

10. Many of them, such as Hu coin net, coin an, ZB, okex, gate, hkongex, can no longer be traded.