Position: Home page » Pool » Advantages of vibration drawing machine

Advantages of vibration drawing machine

Publish: 2021-05-29 02:14:51
1. There is a big difference between the feeder and the ore drawing machine. The feeder only has the function of transferring materials. Different equipment models are selected according to the size of materials; Generally, the ore drawing machine is equipped with bars in the front of the equipment. Generally, it is used to feed large pieces of materials. Because of the bar bar effect, it vibrates back and forth, and is not easy to block, and it can also play the role of slight crushing and screening
the volume of the feeder is from small to large, and the smallest model of the ore drawing machine is relatively large. If you want to know more about it, please come to Landa general
2. The vibration drawing machine takes the vibration motor as the power source, uses the centrifugal force generated by the eccentric block installed at both ends of the vibration motor spindle in the rotation movement to get the excitation force, and drives the table and material of the vibration drawing machine to do periodic linear reciprocating vibration
when the acceleration of the vibration of the ore drawing body is greater than the acceleration of gravity vertically, the material in the body is thrown up and jumps forward according to the parabolic trajectory, and the throwing and falling are completed in an instant. Due to the continuous vibration of the vibration motor, the ore drawing body also vibrates continuously, and the material in the body jumps forward continuously, so as to achieve the purpose of ore drawing and ore conveying
installation method you can download a manual from Xinxiang Dayong
hope to adopt.
3. I only know that vibration ore drawing is better. The cost is almost the same when considering the overall cost. Of course, labor, electricity, maintenance, efficiency and other factors should be taken into account.
4. Double plate vibration machine is simple, that is to combine two single plate vibration machines into a large vibration machine. It is generally used in large mines with large ore drawing capacity.
5.

Vibrating feeder: if the ore is evenly broken, small in size and good in fluidity, swing type or wave type can be selected. It is suitable for elliptical vibration type and directional vibration type
double mass vibrating feeder: the principle of double mass near resonance inertial vibration is adopted. Single row or double row shear rubber springs are arranged at the top and bottom, and the lower pressing plate is connected to the balance body by bolts, and then the left and right side plates are connected with the groove body. It has compact structure, stable starting under constant pressure, and is not affected by the load and jamming of the tank material. The feeding particle size (0-850mm) is large (8-1800t / h). It can be equipped with stepless frequency converter to realize frequency conversion feeding and batching, and remote microcomputer operation and control

6.

1. Before the installation of the seat type drawing machine, the on-site foundation shall be compared with the drawing of the drawing machine. After the inspection, the steel plate shall be embedded. The thickness of the steel plate shall be 20 mm and the flatness shall not be greater than 1.5%
2. After the ore drawing machine is installed, adjust the relative position, and then weld the spring base and the embedded steel plate by spot welding
3. It is required that the two vibrating motors must turn in the opposite direction
4. After installation and running for 1 hour, check whether the body runs smoothly, the yaw is not more than 0.5mm, and the bolt fastening of the vibration motor
5. If the handling capacity is not enough, the exciting force of the vibration motor can be adjusted to achieve the best effect if it is allowed
6. Adjustment of exciting force: A. remove the protective cover; B. loosen the two inner eccentric blocks; C. adjust the two outer eccentric blocks in the same phase and at the same angle; D. tighten the adjusting bolts and install the protective cover; e. the temperature rise of the vibration motor bearing shall not be greater than 80oC (resistance method)
7. During the operation of the ore drawing machine, attention should be paid to whether the movement of the machine body is stable. If abnormal operation or abnormal sound is found, the machine should be stopped immediately for inspection. 8. The bearing of vibration motor shall be lubricated with 3 # lithium grease once a week. The bearing shall be inspected and cleaned once a year to check the wear degree of the bearing. If necessary, it shall be replaced and repaired in time
9. The fastening bolts of the connection parts should be checked frequently to eliminate the hidden danger in time

7. blockchain is the underlying protocol of bitcoin, and it has existed since the day bitcoin was born
blockchain is an important concept of bitcoin, which is essentially a decentralized database and the underlying technology of bitcoin. Blockchain is a series of data blocks generated by cryptography. Each data block contains the information of a bitcoin network transaction, which is used to verify the validity of the information (anti-counterfeiting) and generate the next block
global currency has never been heard of, and there is no relevant report in the mainstream media. However, the recent decent project is quite popular.
8. Ordinary hang up is doomed not. Net earn software generally do not need to take care of, if the day earn 100, then all people go to mining, sky pie, do not have to go to work. It's more or less like digging a few pieces every day.. If there is IDC resource investment, it's different. It's possible for the super miner to earn 100 a day. But it's not meant to be you or me. Investing a lot of capital to hype the ore may also reach this number, but the premise is that you will hype.
9. Millet's 1 meter currency = 1 yuan. Rice currency is a virtual currency. It can be recharged with money, but it does not support cash withdrawal. It can only buy virtual goods of MIUI
10.

Vibrating ore drawing machine is a kind of vibration type inertial vibration ore drawing equipment with vibration motor as excitation source. It is an ideal equipment for ore and other materials discharging, feeding or loading. Compared with other types of ore drawing machine, vibration ore drawing machine has the following advantages: energy saving, high ore drawing efficiency, even ore drawing and easy control

Hot content
Inn digger Publish: 2021-05-29 20:04:36 Views: 341
Purchase of virtual currency in trust contract dispute Publish: 2021-05-29 20:04:33 Views: 942
Blockchain trust machine Publish: 2021-05-29 20:04:26 Views: 720
Brief introduction of ant mine Publish: 2021-05-29 20:04:25 Views: 848
Will digital currency open in November Publish: 2021-05-29 19:56:16 Views: 861
Global digital currency asset exchange Publish: 2021-05-29 19:54:29 Views: 603
Mining chip machine S11 Publish: 2021-05-29 19:54:26 Views: 945
Ethereum algorithm Sha3 Publish: 2021-05-29 19:52:40 Views: 643
Talking about blockchain is not reliable Publish: 2021-05-29 19:52:26 Views: 754
Mining machine node query Publish: 2021-05-29 19:36:37 Views: 750