Is L3 miner easy to repair

In fact, the coins that can be g up every day are different. When L3 + first came out, it was able to dig one Wright coin every day. Now the computing power of the whole network has been greatly improved, and about 0.54 yuan can be g every day. It mainly depends on the comparison between your computing power and that of the whole network

There is a flat head screw at the bottom of carburetor, which can be unscrewed

carburetor is a key part of engine, small changes may affect vehicle performance. Therefore, in the process of carburetor disassembly, appropriate tools should be used, and the force should be moderate, so as to prevent the deformation of parts. The disassembled parts should be placed in order in order to prevent missing or wrong assembly

in the process of cleaning the carburetor, if more deposits are found in the float chamber of the carburetor, it is often caused by the failure of the gasoline filter. At this time, the gasoline filter should be checked. If the failure is confirmed, the gasoline filter should be cleaned or replaced

extended information:

precautions:

1. Carburetor is a key part of engine, small changes may affect the vehicle performance. Therefore, in the process of carburetor disassembly, appropriate tools should be used, and the force should be moderate, so as to prevent parts from deformation. The disassembled parts should be placed in order in order to prevent missing or wrong assembly

2. The carburetor should be cleaned in a clean place, the outer surface of the carburetor should be cleaned, and the internal parts can be cleaned with special cleaning agent for carburetor or instrial gasoline. In addition to impurities, pay attention to clean the gasoline gum on the surface of parts

3. Clean the cleaned parts with compressed air, and do not wipe them with cloth or paper that may cause burr to prevent re pollution. It is forbidden to poke the blocked small hole with steel wire and other hard objects to prevent the change of carburetor performance caused by changing the aperture. Gasoline or compressed air should be used to wash out