Operation specification of underground loader

Publish: 2021-05-16 14:14:02

1. You need professional chips to assemble mining machines. If you want to buy chips, I suggest you buy Avalon's third generation chips directly. But the assembly of mining machine is a very troublesome thing, the technical requirements are higher, but if you do not have professional technical strength, it is recommended that you buy mining machine directly. If you want to be an OEM, you can directly buy chips and other materials for assembly. At present, avalon3 is about to be put into the market. It is suggested to buy avalon3 directly.

1. Before the installation of the seat type drawing machine, the on-site foundation shall be compared with the drawing of the drawing machine. After the inspection, the steel plate shall be embedded. The thickness of the steel plate shall be 20 mm and the flatness shall not be greater than 1.5%
2. After the ore drawing machine is installed, adjust the relative position, and then weld the spring base and the embedded steel plate by spot welding
3. It is required that the two vibrating motors must turn in the opposite direction
4. After installation and running for 1 hour, check whether the body runs smoothly, the yaw is not more than 0.5mm, and the bolt fastening of the vibration motor
5. If the handling capacity is not enough, the exciting force of the vibration motor can be adjusted to achieve the best effect if it is allowed
6. Adjustment of exciting force: A. remove the protective cover; B. loosen the two inner eccentric blocks; C. adjust the two outer eccentric blocks in the same phase and at the same angle; D. tighten the adjusting bolts and install the protective cover; e. the temperature rise of the vibration motor bearing shall not be greater than 80oC (resistance method)
7. During the operation of the ore drawing machine, attention should be paid to whether the movement of the machine body is stable. If abnormal operation or abnormal sound is found, the machine should be stopped immediately for inspection. 8. The bearing of vibration motor shall be lubricated with 3 # lithium grease once a week. The bearing shall be inspected and cleaned once a year to check the wear degree of the bearing. If necessary, it shall be replaced and repaired in time
9. The fastening bolts of the connection parts should be checked frequently to eliminate the hidden danger in time

3. SAPO molecular sieves were synthesized by a novel solvothermal method using environment-friendly nano molecular sieves instead of antioxidants in lubricating oils. Quinoline was synthesized by Friedlander reaction using organic amines as solvent and template. It was catalyzed by CuBTC metal organic framework

4. The sanitation of the public baths is not in place. There are many germs. The high-end bath center can be better, and the supplies are as good as possible.

5. Because the graphics card in the calculation, will proce a large number of page files, if you do not set the virtual memory, these page files should be placed in memory, and mining machine can not use 32g memory, so, it is easy to cause memory overflow, the direct consequence is the blue screen crash.

6. Electrical fire can be prevented by the following ways:

1. Circuit breaker with leakage protection function shall be applied

2< 3. Improve the configuration of fire extinguishing equipment

I hope our answers will help you.

7. From the complicated process of purchasing mining machine, learning to operate and installing mining machine, we have to enre a series of pain points such as the noise of mining machine and high electricity charges in the process of mining. Move your finger to dig out bitcoin, and the income is relatively good. I recommend it!

8. Not yet. Now Yingtai has only launched two motherboards for Intel's 8-generation processors: z370gt6 and z370gt7
there are only two motherboards for 6th and 7th generation processors: tb250-btc and tb250-btc pro.

9. This depends on the performance of your authorities. Generally, the score is above 13, and the proficiency level is generally over 200. If you play a game, it will be about 100, and the poor performance will be reced.

Hot content

Inn digger Publish: 2021-05-29 20:04:36 Views: 341

Purchase of virtual currency in trust contract dispute Publish: 2021-05-29 20:04:33 Views: 942

Blockchain trust machine Publish: 2021-05-29 20:04:26 Views: 720

Brief introduction of ant mine Publish: 2021-05-29 20:04:25 Views: 848

Will digital currency open in November Publish: 2021-05-29 19:56:16 Views: 861

Global digital currency asset exchange Publish: 2021-05-29 19:54:29 Views: 603

Mining chip machine S11 Publish: 2021-05-29 19:54:26 Views: 945

Ethereum algorithm Sha3 Publish: 2021-05-29 19:52:40 Views: 643

Talking about blockchain is not reliable Publish: 2021-05-29 19:52:26 Views: 754

Mining machine node query Publish: 2021-05-29 19:36:37 Views: 750

Operation specification of underground loader

Related to Operation specification of underground loader