Position: Home page » Pool » Power consumption of Dylan 470d miner

Power consumption of Dylan 470d miner

Publish: 2021-05-16 03:58:56
1.

The power consumption of rx470 is 60W. Very low power consumption, good performance. If the full load operation power consumption is quite high, the minimum power consumption is more than 150W. The lowest rated power supply is recommended to be 450W. Compared with the 150W rx480, the power consumption of rx470 is less than 120W. The non-public version can be higher, because the increase of frequency will inevitably lead to the increase of power consumption

extended data:

Dylan's new x-serial proct line, which uses AMD's radion RX 470 core, main frequency of 1242mhz and video memory of 4096mb

graphics card core

chip manufacturer amd

video card chip radon RX 470

display chip series amd RX 400 series

manufacturing process 14 nm

core code Ellesmere Pro

graphics card frequency

core frequency 1242mhz

video memory frequency 6600mhz

video memory specification

video memory type gddr5

video memory capacity 4096mb

video memory Bit width 256bit

key parameters

chip model: AMD radio rx470

video memory capacity: 4096m

output interface: 1 × HDMI interface, 3 × Display port interface

video memory type: gddr 5

core frequency: 926-1206mhz

video memory frequency: 1650mhz

reference: Network Dylan

network amd radon rx4704g

2.

Still image (still image and smart photo picker mode, aspect ratio 3:2) 3872 x 2592 2896 x 1944 1936 x 1296
still image (animation mode, aspect ratio 16:9) 3840 x 2160 (1080 / 60I) 1920 x 1080 (1080 / 30p) 1280 x 720 (720 / 60p)
still image (action snapshot mode, aspect ratio 16:9)) 3840 x 2, 160 program auto mode with flexible program, shutter priority auto mode, aperture priority auto mode, manual mode and scene auto selector mode
exposure compensation
- 3 - + 3 EV, increased by 1 / 3 ev. HD animation 1920 x 1080 / 60 frame / s, interlaced scan (59.94 fields / s *), 1920 x 1080 / 30 frame / s, progressive scan (29.97 FPS), 1280 x 720 / 60 frame / s, progressive scan (59.94 FPS)
slow motion animation 640 x 240 / 400 FPS (30p / 29.97 FPS for playback), 320 x 120 / 1200 FPS (30p / 29.97 FPS for playback)
Animation recorded in still image mode: 1072 x 720 / 60 frames / S (59.94 FPS); Dynamic snapshot 1920 x 1080 / 60 frames / sec, progressive scan (59.94 FPS) (24P / 23.976 FPS when playing) * sensor output is about 60 frames / sec. Below 85% (non condensing)

3.

Please show me your graphics card model. It's easy to judge.

{rrrrrrr}



according to this step, you can see the graphics card model

just look at the CPU and memory, it's OK. If you look at your computer's windows experience index of 4.6, you'll feel much worse

4. snmp-server view GNCVIEW mib-2 included
snmp-server view GNCVIEW cisco included
snmp-server community ultrabmc891 RO
snmp-server community Ragga0ck3rd0M view GNCVIEW RO
snmp-server ifindex persist
snmp-server trap-source XXXXXXXXXXXXXX
snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart
snmp-server enable traps envmon
snmp-server enable traps bgp
snmp-server enable traps config
snmp-server enable traps entity
snmp-server enable traps cpu threshold
snmp-server enable traps syslog
snmp-server host 61.129.61.50 version 2c Ragga0ck3rd0M
5. Unknown_Error
6. Is it cj1w-scu41-v1 or cs1w-scu41-v1 of OMRON? However, the operation is the same. To replace it, you need to set the machine No. switch to the same position as the original one, and the slot position should also be the same as the original one. In addition, for software configuration, you need to use cx-p software to see the original scu41 configuration. It can be seen from the IO table and unit configuration of cx-p software that the original configuration can be uploaded, saved and then downloaded to the new unit
7. Tl-ap1200c-poe v1.0v1.0 user manual 1.7.0_ Network Library
8. It can be said that, for example, the stability of Jinte cloud computing is very good, and many users are willing to mine on this platform.. Are you satisfied with my answer? If you are satisfied, please accept it
9. Let me give you the answer of author BM
after completing BTS and steemit
I realized that there are many things that are consistent between these two applications. A large number of other applications can inherit the same account system, account recovery, and high performance. Steem
and
BTS
are the top performance in the instry. These two blockchains add up to more than half of the total market. In
steem
we make most of the operations free, because users don't want to pay for likes, they only pay for actions like publishing or commenting. Now my work has shifted to EOS, which is equivalent to putting everything together. Provide a programming environment that everyone can use
- by
BM
this means that BTS, steemit and EOS are mutually complementary. Among them, EOS hopes to provide more connections to the former two factory systems for larger ecological applications.
10. The power supply is basically enough. It is recommended to use the 450 rated 450 W power supply 273
Hot content
Inn digger Publish: 2021-05-29 20:04:36 Views: 341
Purchase of virtual currency in trust contract dispute Publish: 2021-05-29 20:04:33 Views: 942
Blockchain trust machine Publish: 2021-05-29 20:04:26 Views: 720
Brief introduction of ant mine Publish: 2021-05-29 20:04:25 Views: 848
Will digital currency open in November Publish: 2021-05-29 19:56:16 Views: 861
Global digital currency asset exchange Publish: 2021-05-29 19:54:29 Views: 603
Mining chip machine S11 Publish: 2021-05-29 19:54:26 Views: 945
Ethereum algorithm Sha3 Publish: 2021-05-29 19:52:40 Views: 643
Talking about blockchain is not reliable Publish: 2021-05-29 19:52:26 Views: 754
Mining machine node query Publish: 2021-05-29 19:36:37 Views: 750