Is miner harmful to memory module

1. mining mainly depends on the graphics card, the damage is also the graphics card. At that time, bitcoin, lightcoin and other crazy time, many people loading machine, a minimum of six 7850 or more graphics card, 24-hour uninterrupted operation, and later devalued a day's electricity charges can not earn, so second-hand graphics card mining card can't buy!!

2. Mining with the graphics card in the computer requires a long-time operation of the computer, and the graphics card needs a lot of calculation. Compared with the normal use of the computer, it will have greater loss, and the service life will be greatly reced. At the same time, long-time operation, the hardware also emits a lot of heat, if the heat dissipation is not good, it will affect all the hardware

3. Overclocking will certainly have an impact on the memory method, but with the different quality of memory, the size of the impact is different, the memory life and quality after overclocking will decline to varying degrees

overclocking depends on the possibility of data loss in memory when the temperature exceeds 26 ℃. Logic and calculation errors rece the reliability of the microcomputer. When the indoor temperature exceeds 30 ℃, there will be more errors in the memory data, which will rece the reliability of the microcomputer. When the indoor temperature exceeds 35 ℃, the memory logic and calculation errors will occur frequently, and the microcomputer error or crash may occur at any time.

4. Unknown_Error

5. Theoretically, there is no harm, but the recommendation is the same brand. Because in practical use, there will be memory incompatibility between different particles, which will cause the computer running inexplicably unstable or crash. Of course, this probability is not very large. Even different particles of the same brand will have this incompatibility, so it is recommended to use the memory of the same particle. These incompatibilities depend on the chipset of your motherboard. Intel is better than via.

6. If your memory constitution is good, then there is no problem, many 800 memory can be stable on 1066MHz, you really don't worry, you can add aluminum fin for your memory cooling. Or you can set the frequency of memory to external frequency in BIOS and rece it to 1:1.

7. Unknown_Error

8. The security detector is just X-ray scanning your items. The energy of X-ray is very low. Your memory mole is not powered on in physical form? How could it be broken? No, don't worry

9. If you plug the frequency is too frequent, of course, it will have an impact, but the impact is not big, that is, the friction of the memory golden finger. However, your problem should be caused by your memory and your memory slot. Don't plug it in when you plug it in. After you put it in place, hold both hands on both sides of the memory and press your colleagues hard. You can hear a "pop" sound, which means that it has been released But don't use too much force, or you will crush the motherboard.

10. I think:
several parameters of memory are more important:
1. Compatibility. If you have memory originally, then the memory you buy doesn't care about 200 or 100, only about whether it is compatible with your original memory! If you are buying a new machine, I suggest you buy a popular brand instead of a good one, because there is no need to spend too much money, but you can't buy parallel procts, because if the computer is still depressed after being rebooted all day, I recommend several brands with good compatibility: Kingston and Weigang, But also to distinguish between single or double-sided, not the larger the better, sometimes can only read half the capacity
specifically, if the landlord really wants to upgrade, you can send me a short message and I'll give you some suggestions
3. Overclocking, generally we don't overclocking, and those who like overclocking won't listen to me! ha-ha!