The miner shut down in an hour
Publish: 2021-05-14 16:15:54
1. 1. The high-pressure fault of the air conditioner caused the protection shutdown. The reason may be that the weather is too hot, the radiator of the outdoor unit is dirty and blocked, and the heat can not be dissipated. It is for this reason that the machine can only be started after the power is removed for a few minutes. After the shutdown, the pressure is restored to balance, and the machine cools down, so it can be started. It is recommended to clean the radiator of outdoor unit and spray water with clean water or air conditioner cleaning agent. 2. Fan problem. If the air conditioning compressor and Freon are basically normal when the machine is just started, check whether the speed of the external fan is normal. If the external fan doesn't run or the speed becomes slow, the normal operation of the air conditioner will be affected. The current will increase and the load of the air conditioner will be too heavy.
2. Currency exchange is a powerful blockchain platform in China. At present, the relatively large domestic exchange is OK huo'an exchange.
3. The premise for mining to have profits is that the profits of bitcoin from mining can carry out all costs, such as mining machinery, electricity charges, maintenance fees, etc. if you can't carry them out, it is actually a loss and can't generate profits. It's better to buy money directly.
4. Obviously, the power supply is an over-current protection. If your power supply is too low, you must...
5. The automatic shutdown of computer is mainly caused by the following reasons:
1. Due to the influence of weather and temperature or the insufficient rotation of CPU fan, the system will overheat, which will lead to the automatic shutdown of the computer. It is suggested to check whether the system temperature is normal
2. Memory reasons. When the memory and motherboard slot contact loose may also cause the computer to automatically shut down, it is recommended to check whether the memory and motherboard plug tight
3. Power supply problem. The lack of power supply is also an important factor that causes the computer to shut down automatically, but from the configuration point of view, the possibility of this problem is very small
4. Software
1. Due to the influence of weather and temperature or the insufficient rotation of CPU fan, the system will overheat, which will lead to the automatic shutdown of the computer. It is suggested to check whether the system temperature is normal
2. Memory reasons. When the memory and motherboard slot contact loose may also cause the computer to automatically shut down, it is recommended to check whether the memory and motherboard plug tight
3. Power supply problem. The lack of power supply is also an important factor that causes the computer to shut down automatically, but from the configuration point of view, the possibility of this problem is very small
4. Software
6. In general, the automatic shutdown may be caused by the high temperature caused by too much st on the CPU fan. If so, clean up the st on the CPU fan and heat sink, and add new heat dissipation silicone grease. If the heat dissipation fan is broken, replace it. If it's not this problem, it may be caused by the problems of motherboard parts or power supply, unstable voltage, hard disk failure, hardware overclocking, etc., and the incompatibility of the new hardware. If you can't find out the reason, you should repair it, because automatic shutdown is not a small problem. In addition, system failure Trojan can also lead to shutdown, but the probability is very small, restore the system or try to reload
if it is automatically shut down or standby without operation, it may be a problem of setting. Right click the desktop and select properties / screen saver / power / select a suitable scheme from the drop-down list of power usage scheme. Set "never" to press the application (or set the appropriate time) in the following list of three contents: turn off the monitor, turn off the hard disk, and system standby
open the control panel / all control panel items / power options / change the schele settings / select to turn off the display (select never or set time), select to change the computer sleep time, select to make the computer sleep, select never or select the appropriate time (win7 or win8 system) from the drop-down list next to it
see if it is caused by the above settings
sometimes when a card appears in a game, video or large program, it will be turned off. How to avoid the computer card will avoid the power off.
if it is automatically shut down or standby without operation, it may be a problem of setting. Right click the desktop and select properties / screen saver / power / select a suitable scheme from the drop-down list of power usage scheme. Set "never" to press the application (or set the appropriate time) in the following list of three contents: turn off the monitor, turn off the hard disk, and system standby
open the control panel / all control panel items / power options / change the schele settings / select to turn off the display (select never or set time), select to change the computer sleep time, select to make the computer sleep, select never or select the appropriate time (win7 or win8 system) from the drop-down list next to it
see if it is caused by the above settings
sometimes when a card appears in a game, video or large program, it will be turned off. How to avoid the computer card will avoid the power off.
7. I hope I can help you:
I can use the following methods to know what the problem is:
1. Observe whether the power light of the host is normal and can display normally, then I can eliminate the power problem, otherwise I can change the power supply (or check the power line socket, etc.)
2. Listen to the sound and judge according to the BIOS power on self-test alarm sound, If there is no alarm sound, two causes can be determined (motherboard failure or graphics card failure or other card failure), the third method can be used to try
3. Plug in and out: pull out the CPU, memory, graphics card, etc., including other cards (it's better to sweep away the st with a brush, and pay attention not to get water), wipe the golden finger of the memory or graphics card with an eraser, and then plug it back or change the socket. When wiping the memory, both sides should go down at the same time, quickly plug it in, and don't push it down slowly
4. Replacement method: replace the above-mentioned devices of other computers one by one, and be careful not to replace all the devices at the same time
5. If it's a software problem, the best way is to re install the system.
I can use the following methods to know what the problem is:
1. Observe whether the power light of the host is normal and can display normally, then I can eliminate the power problem, otherwise I can change the power supply (or check the power line socket, etc.)
2. Listen to the sound and judge according to the BIOS power on self-test alarm sound, If there is no alarm sound, two causes can be determined (motherboard failure or graphics card failure or other card failure), the third method can be used to try
3. Plug in and out: pull out the CPU, memory, graphics card, etc., including other cards (it's better to sweep away the st with a brush, and pay attention not to get water), wipe the golden finger of the memory or graphics card with an eraser, and then plug it back or change the socket. When wiping the memory, both sides should go down at the same time, quickly plug it in, and don't push it down slowly
4. Replacement method: replace the above-mentioned devices of other computers one by one, and be careful not to replace all the devices at the same time
5. If it's a software problem, the best way is to re install the system.
Hot content