How much is the powder loader
Publish: 2021-05-14 05:54:18
1. It depends on the workload. If the workload is large, it will be cheaper to work more. If the workload is small, it will be more expensive. It depends on how much money you earn every day. On average, it's no less than 15000 yuan a month.
2. It's about 200000 for 3 tons, 300000 for 5 tons, 400000 for 6 tons. It's more than 8 tons
3. Landlord did not say what configuration of 10 and 20, so the price is not very easy to say. There are 10 machines on the market, and the price ranges from 15000 to 50000. 20 units are between 55000-110000, with different materials and configurations, so the price is different. 1 ton is 10
4.
it takes about 35000 yuan to buy a new 50 loader the selection principle of buy 50 loader is as follows:
1. Model selection: it is mainly based on the operation situation and purpose. Generally, when working in quarries and soft bases, tire loaders with anti-skid chains are often used
2. Selection of power: generally, the diesel engine for construction machinery is used, and the special plateau type diesel engine should be used when working in special areas, such as places with altitude higher than 3000m
3. Selection of transmission form: hydraulic mechanical transmission is generally selected. The key component is the selection of torque converter. Most loaders made in China use double turbine and single-stage two-phase torque converter When selecting the loader, the braking performance of the loader should be fully considered, including multiple in braking, parking braking and emergency braking. There are three types of brakes: shoe type, caliper disc type and wet multi disc type. The driving mechanism of the brake generally adopts the afterburner, and its power sources are compressed air, air top oil and hydraulic. Commonly used is the air top oil braking system, generally uses the double circuit braking system, in order to improve the driving safety 
extended data:
relevant precautions for purchasing 50 loader:
1. General safety precautions: before purchasing the loader, the driver and relevant personnel must carefully read the operation and maintenance manual or operation and maintenance manual provided by the manufacturer, and do according to the items specified in the data. Otherwise, it will bring serious consequences and unnecessary losses
2. Safety precautions before engine start: before purchasing, vehicle owners need to check and ensure that the lighting of all lamps and display lamps can be displayed normally. In particular, check the normal display of turn signal lamp and automatic display lamp< br />
5. 3 tons machine, it's better to buy brand machine. Brands include: Liugong, Lingong, Xugong and Lovol. Shandong is a big province. These brands are not bad. Do not buy agricultural 3 tons of machine, unless you do farm work, regular earthwork occasions, agricultural modification is not good.
6. There is no unified instry standard for 18 loaders in China
let's talk about the basic configuration:
the economic type (automobile weighting bridge) is proced in Laizhou, Shandong Province, and the four cylinder 490 mechanical type is 32000
the four cylinder 490 full hydraulic type is 36000
the rable type (construction machinery wheel side rection bridge) is proced in Tai'an, Shandong Province. 490 full hydraulic 58000
national standard luxury Longgong Liugong Xiagong Dongfanghong 4108, Feicheng Yunyu 15 drive axle, Shantui or Jingyi 280 double variable, the price is about 120000 to 130000 yuan.
let's talk about the basic configuration:
the economic type (automobile weighting bridge) is proced in Laizhou, Shandong Province, and the four cylinder 490 mechanical type is 32000
the four cylinder 490 full hydraulic type is 36000
the rable type (construction machinery wheel side rection bridge) is proced in Tai'an, Shandong Province. 490 full hydraulic 58000
national standard luxury Longgong Liugong Xiagong Dongfanghong 4108, Feicheng Yunyu 15 drive axle, Shantui or Jingyi 280 double variable, the price is about 120000 to 130000 yuan.
7. XCMG 50 loader is divided into three models:
model working condition price
lw500f light working condition car price about 300000
lw500kl heavy working condition and overweight working condition price 325000 (mine type: 340000)
ZL50G is suitable for all kinds of overweight working condition price 360000
● how to choose domestic loader:
1. There is no best brand, only the best car. The same enterprise, different procts, reliability, cost performance are not the same, depending on what you buy a car for, the most suitable is the best, so choose the right model is the most important, especially the 5-ton car
2. It depends on the service ability of the local sellers and whether they can deal with the faults in time. Among all kinds of earth moving machinery, the loader is one of the machines with the highest working intensity. No matter how good the car is, it has to break down and be repaired. If there is a problem, it can only be accepted if it can be dealt with in time
3. In addition, combine your purchasing power
now, from the technical point of view, XCMG has taken the lead after 1999, especially after 2008, XCMG is the only one in the instry to adopt automobile manufacturing technology. Its proct manufacturing level has been completely in line with that of European and American enterprises, and some of its technological capabilities even surpass those of European and American enterprises. China's leading enterprise of construction machinery has strong strength and deserves its reputation<
● domestic 5-ton vehicles:
1. High grade and overweight vehicles: XCMG 50g (the only one in China) Single rocker arm, long wheelbase)
applicable conditions: Port ore powder and other overweight conditions, all kinds of loading conditions requiring over 3.5m super-high unloading height. Of course, other general working conditions are no exception
because its weight reaches 17.5 tons, its digging force reaches 17 tons, and the traction force of the latest improved 50g (equipped with the latest special reinforced bridge of XCMG) reaches 17 tons, it is nicknamed "small 60", and no one can match it in China
XCMG 50g, at the 5-ton level, not only defeated the domestic invincible, but also defeated the European and American powers in the international market. In northern Europe, the Middle East, pan Russian region and South America, XCMG 50g has graally repelled the same level procts of European, American and Japanese powers
in the field of construction machinery, XCMG 50g loader and XCMG truck crane are the first in the world to make the Western powers feel the awe inspiring power of Han and Tang Dynasties that they were afraid of thousands of years ago
at present, many domestic enterprises are aiming at XCMG 50g, a classic proct. Some of them are superficial. By increasing the pressure of the hydraulic system and the digging force, the nominal parameters are up. However, e to the high pressure, some of them reach 20MPa, the system is overloaded and the reliability is greatly reced, while XCMG achieves the current excellent performance, the pressure is only about 17Mpa, The system works very easily
XCMG's design style is solid and steady. Among the domestic 5-ton vehicles, only XCMG 50g and 500K models have an unloading height of more than 3.7. The foundation of this ability is: more steel, heavy weight and strong structure
2. High grade heavy instry vehicles: XCMG 500k-2, Liugong 856, Xiagong 958, Shangong 650 Single rocker arm, long wheelbase)
applicable conditions: mine and other heavy load earthwork conditions, as well as coal conditions requiring large bucket capacity and large unloading height. Of course, there are no other general conditions
3. Medium grade heavy instry vehicles: XCMG 500K, Liugong 50c, Xiagong 956
applicable conditions: Mining and other heavy earthwork conditions, as well as coal conditions requiring large capacity and large unloading height. Of course, there are no other general conditions. Among them, XCMG's 500K unloading height can reach more than 3.7m, which has a special advantage in the coal market
4. Medium and heavy ty vehicles: XCMG 500F, Lingong 953, Liugong 855 (single rocker arm, medium wheelbase)
applicable conditions: General earthwork, coal and other bulk loading conditions, the former two are also widely used in mine conditions
5. Medium and light ty vehicle: xg951-3 (double rocker arm, short wheelbase)
applicable conditions: coal and other bulk loading conditions, general earthwork conditions
6. Low grade medium and light ty vehicles: all kinds of double rocker cars for small enterprises
applicable conditions: coal and other bulk loading conditions, general earthwork conditions< However, the effect is different.
● heavy load Wang Zhongwang: XCMG 50g loader
I. model features
XCMG 50g: long wheelbase model, suitable for overweight working environment<
2. Proct evaluation
features are as follows:
1. The strongest structure: the machine weighs 17.5 tons, which is the largest among all 5-ton models in China, with the largest amount of steel and incomparable firmness
2. The largest force: the digging force is more than 17 tons, and the traction force of 09 new 50g is also more than 17 tons, which is especially suitable for mine operation
3. The highest configuration: pilot control, standard air conditioning. The latest improved model in 2009, with overall improvement of comfort, is equivalent to the level of automobile. Optional distribution control box, etc
4. The longest history: XCMG 50g was born in 1999. It is the founder of the third generation loader in China, and also the most classic model that became famous in the first World War. It has been leading the overweight working condition market for 10 years. The most arous honing in 10 years has made XCMG 50g perfect, and there are even 50g "star chasers" in the market
5. Special capacity: the only 5-ton truck in China has a unloading height of more than 3.7 meters (e to its super large machine weight and super long wheelbase, it has strong operation stability. Due to its light weight and poor stability, the unloading height of other manufacturers' models can only reach 3.4m in general)
3. Practical application
1. XCMG 50g equipped with diesel 6121 engine and ZF box will definitely surprise you
2. At present, many users, especially coal users, have increased the counterweight of XCMG 50g beyond the warranty period, increased the bucket size of 3.7m-high cars to more than 4 cubic meters, and increased the operation capacity to more than 6-ton cars, which is not available for other domestic models< 4. Economic analysis
as XCMG always adheres to the idea of high-end procts and does not pay attention to the development of low-end cheap cars, in the Chinese market where scale is the hero, XCMG's loader brand is not as prominent at home as it is abroad, so the developed good cars can not sell at a good price. According to the actual capacity of the proct, the normal price of XCMG 50g procts with ordinary configuration in 2009 should be more than 350000, but the actual market price is basically lower than this price, which is the most cost-effective car among the current domestic high-end models< 5. Market performance
XCMG 50g is the originator of China's third generation loader and the most successful classic model. It came out in 1999. After 2000, many enterprises imitated the design style of XCMG 50g one after another. From 2001 to 2002, other major enterprises followed XCMG to promote high-end cars, but because they could not directly the design structure and style of XCMG 50g, So far, there is no model that can match XCMG 50g< Since the advent of XCMG 50g, two things have been achieved:
1. Repel all the imported brands of this specification. Since 2000, the number of imported 5-ton loaders has graally reced to almost zero
2. It has swept the markets of northern Europe, Eastern Europe, Middle East and South America, becoming the singles champion in these regions, and graally entering the markets of Western Europe and North America such as Germany and the United States< With a 50g loader, XCMG is unique in the global loader market
in fact, XCMG has been leading the instry trend in high-end models since 2000.
model working condition price
lw500f light working condition car price about 300000
lw500kl heavy working condition and overweight working condition price 325000 (mine type: 340000)
ZL50G is suitable for all kinds of overweight working condition price 360000
● how to choose domestic loader:
1. There is no best brand, only the best car. The same enterprise, different procts, reliability, cost performance are not the same, depending on what you buy a car for, the most suitable is the best, so choose the right model is the most important, especially the 5-ton car
2. It depends on the service ability of the local sellers and whether they can deal with the faults in time. Among all kinds of earth moving machinery, the loader is one of the machines with the highest working intensity. No matter how good the car is, it has to break down and be repaired. If there is a problem, it can only be accepted if it can be dealt with in time
3. In addition, combine your purchasing power
now, from the technical point of view, XCMG has taken the lead after 1999, especially after 2008, XCMG is the only one in the instry to adopt automobile manufacturing technology. Its proct manufacturing level has been completely in line with that of European and American enterprises, and some of its technological capabilities even surpass those of European and American enterprises. China's leading enterprise of construction machinery has strong strength and deserves its reputation<
● domestic 5-ton vehicles:
1. High grade and overweight vehicles: XCMG 50g (the only one in China) Single rocker arm, long wheelbase)
applicable conditions: Port ore powder and other overweight conditions, all kinds of loading conditions requiring over 3.5m super-high unloading height. Of course, other general working conditions are no exception
because its weight reaches 17.5 tons, its digging force reaches 17 tons, and the traction force of the latest improved 50g (equipped with the latest special reinforced bridge of XCMG) reaches 17 tons, it is nicknamed "small 60", and no one can match it in China
XCMG 50g, at the 5-ton level, not only defeated the domestic invincible, but also defeated the European and American powers in the international market. In northern Europe, the Middle East, pan Russian region and South America, XCMG 50g has graally repelled the same level procts of European, American and Japanese powers
in the field of construction machinery, XCMG 50g loader and XCMG truck crane are the first in the world to make the Western powers feel the awe inspiring power of Han and Tang Dynasties that they were afraid of thousands of years ago
at present, many domestic enterprises are aiming at XCMG 50g, a classic proct. Some of them are superficial. By increasing the pressure of the hydraulic system and the digging force, the nominal parameters are up. However, e to the high pressure, some of them reach 20MPa, the system is overloaded and the reliability is greatly reced, while XCMG achieves the current excellent performance, the pressure is only about 17Mpa, The system works very easily
XCMG's design style is solid and steady. Among the domestic 5-ton vehicles, only XCMG 50g and 500K models have an unloading height of more than 3.7. The foundation of this ability is: more steel, heavy weight and strong structure
2. High grade heavy instry vehicles: XCMG 500k-2, Liugong 856, Xiagong 958, Shangong 650 Single rocker arm, long wheelbase)
applicable conditions: mine and other heavy load earthwork conditions, as well as coal conditions requiring large bucket capacity and large unloading height. Of course, there are no other general conditions
3. Medium grade heavy instry vehicles: XCMG 500K, Liugong 50c, Xiagong 956
applicable conditions: Mining and other heavy earthwork conditions, as well as coal conditions requiring large capacity and large unloading height. Of course, there are no other general conditions. Among them, XCMG's 500K unloading height can reach more than 3.7m, which has a special advantage in the coal market
4. Medium and heavy ty vehicles: XCMG 500F, Lingong 953, Liugong 855 (single rocker arm, medium wheelbase)
applicable conditions: General earthwork, coal and other bulk loading conditions, the former two are also widely used in mine conditions
5. Medium and light ty vehicle: xg951-3 (double rocker arm, short wheelbase)
applicable conditions: coal and other bulk loading conditions, general earthwork conditions
6. Low grade medium and light ty vehicles: all kinds of double rocker cars for small enterprises
applicable conditions: coal and other bulk loading conditions, general earthwork conditions< However, the effect is different.
● heavy load Wang Zhongwang: XCMG 50g loader
I. model features
XCMG 50g: long wheelbase model, suitable for overweight working environment<
2. Proct evaluation
features are as follows:
1. The strongest structure: the machine weighs 17.5 tons, which is the largest among all 5-ton models in China, with the largest amount of steel and incomparable firmness
2. The largest force: the digging force is more than 17 tons, and the traction force of 09 new 50g is also more than 17 tons, which is especially suitable for mine operation
3. The highest configuration: pilot control, standard air conditioning. The latest improved model in 2009, with overall improvement of comfort, is equivalent to the level of automobile. Optional distribution control box, etc
4. The longest history: XCMG 50g was born in 1999. It is the founder of the third generation loader in China, and also the most classic model that became famous in the first World War. It has been leading the overweight working condition market for 10 years. The most arous honing in 10 years has made XCMG 50g perfect, and there are even 50g "star chasers" in the market
5. Special capacity: the only 5-ton truck in China has a unloading height of more than 3.7 meters (e to its super large machine weight and super long wheelbase, it has strong operation stability. Due to its light weight and poor stability, the unloading height of other manufacturers' models can only reach 3.4m in general)
3. Practical application
1. XCMG 50g equipped with diesel 6121 engine and ZF box will definitely surprise you
2. At present, many users, especially coal users, have increased the counterweight of XCMG 50g beyond the warranty period, increased the bucket size of 3.7m-high cars to more than 4 cubic meters, and increased the operation capacity to more than 6-ton cars, which is not available for other domestic models< 4. Economic analysis
as XCMG always adheres to the idea of high-end procts and does not pay attention to the development of low-end cheap cars, in the Chinese market where scale is the hero, XCMG's loader brand is not as prominent at home as it is abroad, so the developed good cars can not sell at a good price. According to the actual capacity of the proct, the normal price of XCMG 50g procts with ordinary configuration in 2009 should be more than 350000, but the actual market price is basically lower than this price, which is the most cost-effective car among the current domestic high-end models< 5. Market performance
XCMG 50g is the originator of China's third generation loader and the most successful classic model. It came out in 1999. After 2000, many enterprises imitated the design style of XCMG 50g one after another. From 2001 to 2002, other major enterprises followed XCMG to promote high-end cars, but because they could not directly the design structure and style of XCMG 50g, So far, there is no model that can match XCMG 50g< Since the advent of XCMG 50g, two things have been achieved:
1. Repel all the imported brands of this specification. Since 2000, the number of imported 5-ton loaders has graally reced to almost zero
2. It has swept the markets of northern Europe, Eastern Europe, Middle East and South America, becoming the singles champion in these regions, and graally entering the markets of Western Europe and North America such as Germany and the United States< With a 50g loader, XCMG is unique in the global loader market
in fact, XCMG has been leading the instry trend in high-end models since 2000.
8. 5 tons. The price is low. 280000, Longgong 850. The 620000 Liugong 856-3 at the high point and the 800000 Carter 950 at the high point are all loaded with 5 tons.
9. Do you want to sell or buy? To buy a loader of about 30 tons is about 150000 yuan, about 90000 yuan for 20 tons, and 50000 or 60000 yuan for smaller 15t, for reference only.
Hot content