How does the Ethernet miner always come off the line

1. Generally speaking, press the three keys of Ctrl + Alt + delete
the specific operation methods are as follows:
1. Judge that the machine is in a dead state. The way to change the state is to press the NumLock key to see if the num light will change the state with the pressing of the key. If it doesn't change, it will be in a crash state
2. If the machine is in a dead state, press the CTRL and ALT keys with your left hand, and then press the delete key with your right hand while keeping pressing
3. The system will restart.

2. This kind of thing should be a network mole problem. It's better to check with the after-sales department.

3. Entity miner, the security is very high

4. Your question has been left unanswered. Let me give you a supplementary answer
to sue in the local court where the company is located is certainly OK
if you want to sue in your local court, it depends on the specific cause of action, but it may be more troublesome. Since they are all in Beijing, it is more convenient to file a case directly in the defendant's local court if you want to deal with it simply
for answers to other questions, please refer to the reply in my special post.

5. 1.

6. Hello

the situation you mentioned is generally caused by the lines, cats, routers, etc. of the operators

1 check the crystal head of the lower network cable and telephone line for aging and rusting. If it doesn't work, it will be redone, otherwise it won't affect it

2 the cat has been open for a long time and is very hot. It is recommended that the cat should be placed in a ventilated place as far as possible and not overlap with the router. So as not to overheat. It's really no good. It's recommended to change a cat with good performance (I called Telecom and changed it for free).
3 several computers share the same network. Because the router is too bad, others will drag the router to death when they watch movies with P2P. It's better to restart the router. The long-term solution is to change a better enterprise router

4 the business opportunity room is far away from your home, beyond the distance of ADSL, line fault, etc., then we need them to measure the signal strength, and line condition (sometimes two lines, broken one can also access the Internet, but the network speed is slow, easy to drop, ordinary people can't find it)

please look for problems from the above points, hoping to help you!!!

7. This should be your computer configuration and system problems!! May also be caused by poisoning or TX detection

the output of summoning is relatively high. The general display driver sometimes has the problem of card or offline

just update the display driver or replace the display card!! If not, check and kill the Trojan horse, virus!! If it is TX detection, wait half an hour and then on it!!!

8. First of all, there are several ways to deal with the computer drop:
first, check whether the network cable is loose
for most broadband users, ADSL cat connected wireless router is the most common way of network layout. When there is a drop, we should first consider the line problem
because the telephone line is too long, there are too many connectors, or there are some interference sources, it is likely to cause the line dropping, and the poor quality network cable that does not meet the standard often causes the network instability, so when you find the line dropping, you should first check whether the network cable interface is loose. If you find that the network cable interface is in good condition, you should check the power signal lamp
Second, whether the power signal lamp is always on
if the power signal lamp is not on, first of all, check the power supply. For example, whether it is caused by the instability of the power supply, and whether there is a problem with the power supply of ADSL modem itself
if you touch the shell of ADSL modem with your hand, it feels very hot. At this time, you may as well turn off the ADSL modem temporarily until it cools down and then turn it on for use, or put it in a relatively ventilated position, which can also eliminate the disconnection fault
Third, check whether the data signal is normal
if the data signal light is not on, it is likely that the line is open circuit, short circuit and other phenomena, and then through the telephone test to see if the line is normal, if not, you can ask the technical personnel of ADSL service provider to solve this problem
if the data signal light flashes, it is likely to be caused by poor line contact. You must check whether the extension is used, whether the connector is firm, whether the ADSL connection line is too long, etc. If the data signal lamp is still not on after checking according to the above steps, it indicates that the fault has nothing to do with the circuit, and continue to find other reasons
4. Whether the signal light of the network card is stable
under normal circumstances, the signal light of the network card in the computer should keep flashing or always on after it is connected to the ADSL modem through the network cable. If the signal light of the network card is in an unstable state, that is, it is not on or flashing, it is likely that the connection between the network card and the network cable is faulty
in addition, check whether the network card is loose, whether the network card driver is installed correctly, whether the network card resources conflict, and whether the network cable connector is loose. If it still can not return to normal, it means that the fault is not caused by network card or network cable< 5. Network address conflict is not allowed.
if the IP address of ADSL modem conflicts, or the DNS server address is set incorrectly, ADSL will be dropped
if you are a virtual dial-up user, you don't need to set your own IP address, just choose auto assign. If you use a fixed IP address, you must check whether the IP address conflicts with the IP addresses of other workstations in the same network segment, whether the DNS address is set correctly, and whether the TCP / IP parameters have changed. If you still can't get rid of the trouble, you have to find out the reason from the dialing software< Sixth, check whether the dialing software works normally.
first, double-click the dialing program on the desktop of the system with the mouse to perform the broadband dialing connection operation. If you find that the system has an error prompt of "unable to connect" in the dialing process, you can click the "try again" button in the prompt window. Under normal circumstances, you can redial three to five times to solve the problem
if we can't connect successfully after redialing for 3 to 5 times, we can consider turning off the broadband "cat" power for a period of time and then turn it on again, and use ping command to test the IP address of broadband "cat". If we can ping the IP address of broadband "cat", we can redial again. I believe this will probably solve the problem
if you still can't dial successfully, you may as well restart the computer system, and then dial repeatedly; If such efforts can not solve the problem, it is very likely that the data machine in the telecom room has locked the user account. At this time, we can only contact the staff of the operator to help unlock it
if you can access the Internet normally without modifying the TCP / IP parameters, you may as well delete the TCP / IP protocol, then re install it and set it correctly, which may be able to solve your disconnection problem
7. Excessive load
excessive load is also one of the reasons for broadband disconnection. For example, we often use BT, for example, some people in the broadband sharing network are downloading bt, which is likely to cause the router to be disconnected e to excessive load. This situation often occurs in student dormitories or small office networks
in order to avoid this situation, we can limit the flow and bandwidth of BT download so as not to affect other users' normal access to the Internet, especially the shared broadband such as cm and FTTx + LAN. Crazy P2P download is the main cause of network paralysis or frequent offline. Of course, we can also change a big station with fast connection speed to see if the connection speed is normal, or rece the download burden< 8. The number of shared broadband machines
e to the limited number of machines in general routers, so is wireless routing. When the wireless router has too many routers, it will cause the network load to be too large, resulting in the problem of crash and disconnection
in order to avoid the above situation, we can limit the processor and cache performance to rece the number of wireless routers< 9. Virus infection leads to Internet disconnection

9. It is too laggy is too laggy to detect the game. You can see that the task manager takes up a lot of cards and cards, and then you have some abnormal data in the game. So TP starts to detect the files in your computer, which means that if you open the card, it will drop the card. Then it means that the configuration of your computer is low, and it needs to upgrade the memory of the general hardware 2G. Depending on the card it detects, you can clean up the local data, which will be better
the first step is to close the game directly after you drop the line, Delete the. Keyset in the root directory of the game
(please see clearly to delete all the files with. Keyset as the suffix.
in the Internet bar, there must be only one. If you drop more lines at home, there may be several such files
remember to delete them all.... many people say that they want to be updated. They won't update at all)
Second, open the DNF in the directory_ China file
(this file is in DNF directory. It is a text in cfg file format)
right click to open it from Notepad
2: you will be surprised to find your character information in it, etc
(our newly installed game opens dnf china.cfg and you can see that it is empty,
there is nothing in it. When we log in for the first time,
there will be data records in dnf china.cfg,
, which QQ you use to log in in which area)
and your ID. OK, now let me explain one by one,
what they mean
[DNF common]
config version = 1 configuration information (1 seems to be a parameter form)
window_ Whether mode = 1 is window mode (0, 1 for yes or no)
[ID 123456789] your ID (it seems that you have changed)
select server = 91 display server (91 seems to be a code)
select channel type = 0
select channel page = 2 this is the page number under the channel interface = 2, which means that the second page is
select channel count = 25 in the channel interface Code = 25 means channel 25. If you switch to channel 32, you will see
select character slot = 0 display quality (0, 1, 2 / up, middle, down)
last connect date = 708 (this is the last login time = 708, which is July 8, and so on))
ngeon process info = 1 underground city information guide
zoom effect = 0 lens zoom in (0, 1 / Yes, No)
sound volume = 100 sound effect size (100%)
music volume = 100 background music size (100%)
[ch 421286062 kesri-644556368 2]
skill command seal = 00000000000008
(this pile of things is so long, I don't know what it is, but it seems to have something to do with your skills, In the edit menu, select all, delete all, and confirm
at this time, some of your data are abnormal, illegal and interrupted. It's gone
when you log in the game again, the system will record it again
the second step, which is the most important step, is to open the DNF file name in the directory.
the format is TRC file. When you open it in Notepad, you will find that it is full of unreadable words,
it doesn't matter, because those are encrypted for you. Of course, you can't understand them.
here we just need to delete them directly. Then create a folder named dnf.trc in the DNF directory. Next time, this file will not be generated automatically
then find a text document called bugtrace. That's the code that records the data errors you made with G. If so. Quickly delete all the light (save). No, I don't care about him
then find the text document named laglog. It's there to record the time when you dropped off the line. Again. Delete (save) everything in it.