At the beginning of the age of computing power, he won the core

1. Heating building area refers to the building area within the unit door excluding the public staircase and open balcony. The area of the original closed balcony (excluding the one sealed by itself) is calculated as half. Heating building area can be calculated in the following ways: 1. Subject to the as built drawing of the house, the building area marked on the drawing (excluding the shared area) is the heating building area. 2. If the old residence has no as built drawing as the basis, the heating building area can be calculated by multiplying the use area (the rental area of the public housing) by a factor of 1.3. The coefficient is the average value obtained by measurement according to the house type and structure of various houses. If there is any dispute between the two parties, the on-site measurement shall prevail. The common wall between the two households shall be measured to the center line of the wall, and the outer wall shall be measured to the outer wall skin. The above standard is also applied to the residential buildings with double floors. 70% of the fees will be charged for the space below 2.2 meters on the top of the upper slope, and 50% for the space without radiator. For the special room type with special height, if the height exceeds 3.5m, 10% heating fee will be charged for every 0.35m increase. Heating building area refers to the building area within the unit door excluding the public staircase and open balcony. The area of the original closed balcony (excluding the one sealed by itself) is calculated as half. Heating building area can be calculated in the following ways: 1. Subject to the as built drawing of the house, the building area marked on the drawing (excluding the shared area) is the heating building area. 2. If the old residence has no as built drawing as the basis, the heating building area can be calculated by multiplying the use area (the rental area of the public housing) by a factor of 1.3. The coefficient is the average value obtained by measurement according to the house type and structure of various houses. If there is any dispute between the two parties, the on-site measurement shall prevail. The common wall between the two households shall be measured to the center line of the wall, and the outer wall shall be measured to the outer wall skin. The above standard is also applied to the residential buildings with double floors. 70% of the fees will be charged for the space below 2.2 meters on the top of the upper slope, and 50% for the space without radiator. For the special room type with special height, if the height exceeds 3.5m, 10% heating fee will be charged for every 0.35m increase.