Where does bainianling go to Guangzhou maintenance service cente

1. The main reasons for the slow movement of mechanical watch are as follows: lack of activity and kinetic energy; The watch is magnetized; The movement oil sludge is dry
generally, the date and time of a watch can't be adjusted from 9:00 p.m. to 3:00 a.m., which is easy to cause problems in the calendar transmission gear system of the watch, so it's the forbidden time for the watch to adjust the date ring this period
if the power energy of the watch is insufficient, the watch will slow down or not go. The automatic mechanical watch needs to be worn normally for about 8 hours a day, and the normal and appropriate amount of exercise kinetic energy is needed to support the travel time. Wearing 8 hours a day can support about 36 hours of travel time
generally, a watch is close to a magnetic field. For example, if it is placed next to an electrical appliance (such as a stereo, refrigerator, computer, etc.) that generates a magnetic field and a magnetic object (such as a magnet or a mobile phone), it will be magnetized, which will affect the watch's speed, inaccuracy or temporary stop. If the watch oil in the watch movement is dry, it will increase the friction resistance between the parts in the watch, causing the watch parts to be damaged and unable to operate normally.

2. The more common reason may be the lack of kinetic energy, but some friends may say like this, I bought a fully automatic mechanical watch, so I don't need to wind it myself. In fact, this is a big mistake. The full-automatic mechanical watch does not need to be wound manually, but it needs to be worn on the hand for at least 8 hours, because the full-automatic mechanical watch is wound tightly by the random swing of the automatic Tuo, and the automatic Tuo swings with the movement of the arm, so if the mechanical watch needs to be worn on the hand frequently
but what should I do if I often wear it on my hand and don't go away? Don't worry. It may be that the kinetic energy is insufficient. At this time, we need to tighten the spring manually
after the above methods, we also find that the machine doesn't go. What should we do? Here we can eliminate the cause of insufficient kinetic energy of the mechanical watch. It should be that the mechanical watch is out of order. If you are not a watch professional, you'd better not rush to remove it. Please send it to a professional watch repairman for repair. Before the watch, I talked about the maintenance method of mechanical watch. Mechanical watch needs more maintenance than quartz watch. Here, I emphasize the maintenance method of mechanical watch:
1. If it is a manual mechanical watch, it should wind the mechanical watch regularly. It is recommended to wind the mechanical watch around 8 pm
2. If the arm movement of the automatic mechanical watch is insufficient, it is necessary to wind the watch manually, and the rotation of the crown should be controlled within 20 turns
3. If the automatic mechanical watch has not been worn for more than 40 hours, it is necessary to rotate the crown for 20 turns to start the drive system of the movement
4. No matter how waterproof the watch is, you should try to avoid getting wet. If you get wet, please wipe it dry in time and make sure that the crown is locked at all times. The waterproof ring should be replaced once a year
What if the mechanical watch doesn't go away? We need to set up the common sense of mechanical watch protection at ordinary times. When we don't go away, we don't need to worry. According to the above methods, we can eliminate them one by one, usually because of the lack of kinetic energy.

4. It was emphasized in the
blockchain
aspect at the Changsha Mayor's office meeting before, and then a group of
enterprises in Changsha jointly
initiated the preparation of blockchain
Instry Alliance
. Now the high tech Zone has built a service platform project of SMIC blockchain, which is to collect enterprises on the chain. It is estimated that it wants to build an instry chain.

5. The overclocking amplitude of each video card is different
a card can overclock and adjust the fan speed directly in the deep red drive interface

the overclocking amplitude of the core frequency of Dylan 390 cool energy driven by crimson is about 8-15% (this refers to the default voltage overclocking. Silent overclocking does not cause any damage to the graphics card. If the graphics card is pressurized, it may burn out. The overclocking benchmark is running 3dm11. If it can run 3dm11 completely after exceeding 15%, it is considered that the overclocking is successful. If it can't run 3dm11 after exceeding 15%, it will be considered as successful, If the frequency is reced to 13%, it means that this video card can exceed the frequency by 13%, and 390 can exceed the frequency by more than 11%, which is generally 8%)
in addition, there is video memory overclocking. Video memory overclocking is easy to damage the video card, so it is generally not recommended to use super video memory
(I use sapphire 390, the core frequency of my video card is 10%, and after the video memory overclocking reaches 1650m, I can complete 3DM)

6. The building owner needs to install the driver and is the latest running score. The number can't represent everything