Jijia maintenance center to Tianjin International Financial Cent

1. Room 3003, 30 / F, Tianjin International Financial Center, 136 Chifeng Road, Heping District, Tianjin, 022-23461855
whether it is all steel or precious metal case, there is always the problem of wear. A lot of people will be attracted by the words stainless steel, never wear and tear. But in fact, even the case made of the best steel will be worn. Even the buckle will wear out when it comes into contact with the desktop naturally every day. For example, a long time to knock the keyboard, will lead to the button on the ugly pattern. For this reason, proper attention should be paid not to let the case and watch chain participate in unnecessary wear, which is also needed to make our quartz watch "look very new"
when adjusting a watch, you should avoid screwing the crown too fast. The small components in a precise mechanical watch are quite fragile compared with the strength of human hands. Therefore, if you are not proficient in the initial adjustment or adjustment, it is very necessary to read the brand manual carefully first. When encountering unexpected resistance, don't use too much force. It may be that the operation is wrong. Slow motion can avoid some unnecessary damage.

2. Our mechanical watch often stops stealthily and leaves inaccurately. Most people wonder if the mechanical watch is broken. There are many reasons for the mechanical watch to stop stealthily, including the following main reasons
1. Insufficient kinetic energy: insufficient top chord and kinetic energy. In particular, the automatic mechanical watch requires a large amount of arm activity, and the efficiency of chain up is very low. If you usually exercise a small amount, you can wind it manually, which can ensure enough kinetic energy
2. Gear failure: gear train failure such as eccentric wheel and center wheel failure will cause watch to stop stealthily. These cases are often not easy to find, need to be disassembled, careful inspection and testing in order to find out the problem and solve the problem
3. Lack of maintenance: the mechanical watch should be maintained every 2-3 years or so. If it is not maintained for a long time, a lot of sludge will be proced inside. The friction between gears will increase, leading to the occurrence of sliding teeth
there will be an after-sales telephone number on your warranty sheet. Call the after-sales telephone number to inquire about the after-sales address.

3. Double click user information financial information currency of PayPal balance select a new currency and add a new currency.

4. The first step is to open the cover and clean the appearance of the dial accessories. First, put the watch shell into the ultrasonic wave for shock cleaning

the second step: disassemble the movement for cleaning. During the use of the watch, add the lubricating oil dripping between the gear shafts and the parts for a long time, and it will evaporate and dry. Some metal debris, st, fibers, etc. generated by the friction between the gears may form sludge, which will increase the resistance of the gear rotation. First, manually clean each part step by step with a cleaning brush. Some precision parts are relatively fine, so manual cleaning is required. At the end of manual cleaning, put it into the ultrasonic wave to vibrate. The vibration of ultrasonic wave can destroy the attachment adsorbed on the core parts and make them separate. After cleaning, put it into the dryer core parts

the third step: assemble the movement, don't be cheap when the watch gets into the water, and don't dismantle it by yourself. Cleaning, oiling, assembling and other processes all test the professional level of the maintenance master. They all need to operate in strict accordance with the standard, because the amount of oil that each part is stained with and the control of the oil amount are crucial to the accuracy of a watch's travel time; Finally, check the wear condition of the movement parts, and assemble them if there is no problem

Step 4: check and adjust the watch for water. Don't be cheap. Don't take down the bar by yourself, check the time of departure and adjust the time
generally, the allowable error of mechanical watch issued by the state is about 30 seconds per day, and that of quartz watch is about 15 seconds per month. Watch to avoid contact with the magnetic field, avoid placing in strong magnetic waves of computers, televisions, audio and other items near

Step 5: after replacing the waterproof ring, conct waterproof detection. After the movement is assembled, replace the watch case, front ring rubber ring, back ring rubber ring and crown rubber ring with new rubber ring and apply waterproof oil. Finally, cover the back cover of the watch. Generally, there are two kinds of machines for waterproof detection. The left vacuum swab machine can detect the waterproof level of positive and negative pressure more precisely. If the waterproof detection fails, the right real water test machine will be used at this time. The water pressure test machine is to see the water and air leakage part of the watch, check the air leakage position, check graally, and finally carry out waterproof treatment

[service address: room 3003, 30 / F, Tianjin International Financial Center building, 136 Chifeng Road, Heping District, Tianjin]

5. < UL >

Tianjin Jijia maintenance service center [30th floor, Tianjin International Financial Center, 136 Chifeng Road, Heping District]

magnetization of Jijia Watch: magnetization of watch is one of the common reasons for watch slow down. Even an antimagnetic watch, even an antimagnetic watch, can't be placed next to some electrical appliances, because some parts of it are not antimagnetic and will be magnetized over time. Watch is magnetized, need to go to professional Jijia maintenance after-sales Center for degaussing

Jijia watch lacks power: Jijia mechanical watch is divided into manual winding and automatic winding. Lack of power is often an important reason for the watch to slow down or even stop. The mechanical watch with manual winding can solve the problem by winding, while the watch with automatic winding is mostly e to the lack of wearing time (less than 8-10 hours per day) or the people with small amount of exercise. Ordinary office friends or the elderly often appear mechanical watch power shortage and lead to watch slow situation

mechanical failure caused by insufficient maintenance of Jijia Watch: not paying much attention to daily wearing, collision and other problems occurred, which made the internal parts of Jijia watch loose, resulting in inaccurate watch travel time. Dust, foreign bodies, so that gear teeth stuck each other, but also some of the watch is too much or very little oil, these will make the electronic watch go bad. When encountering these faults of stepping motor and gear train, it is necessary to clean, remove foreign matters and refuel. Some parts in the movement are damaged and need to be replaced

6. Any Jijia watch can't be repaired as long as its cover is cracked or scratched. It can only be replaced with a new one

when Jijia watch is accidentally dropped to the ground, or e to a variety of collisions, the glass of Jijia watch is damaged. Depending on the degree of damage, there are scratches, cracks, broken edges and corners, complete damage, etc. If it's just scratches and cracks, you can make do with it. Of course, the Jijia watch is not beautiful. If the edges and corners are broken or completely damaged, you have to replace the glass of the Jijia watch

if the glass on the surface is completely cracked, and the broken and damaged surface is inward (toward the dial surface), glass debris will cover the dial. In this case, we must take immediate measures. The basic measures for watch maintenance are as follows:

(1) pull out the watch handle and stop the Jijia watch

(2) never dial the needle or adjust the calendar quickly

(3) the Jijia watch should be placed flat (preferably with the glass facing down) until it is sent to the clock repair shop

(4) violent vibration and shaking are not allowed

(5) the clock repair shop should pay attention not to damage the dial and needle with glass debris ring disassembly and maintenance

Tianjin world famous watch customer service center is located in room 3003, 30 / F, Tianjin International Financial Center building, 136 Chifeng Road.

7. Lack of power: [Tianjin] [Heping District] [Room 903, 9 / F, HNA Tianjin Center office building, 219 Nanjing Road], or the time of wearing it every day is relatively short, which leads to the lack of power of the automatic mechanical watch and the watch does not go. Automatic mechanical watch is through arm movement to wind the watch, if the amount of exercise is not enough or not wearing will lead to watch does not go. All kinds of brands of automatic mechanical watch are based on this principle. The solution is to wear more and exercise more, and remember to wind up when you don't wear it. The second hand touches the watch cover: the second hand is too high or uneven, and the center hole of the main splint is worn, which will cause the concentricity of the center gear shaft and the second gear shaft to decrease, and the watch glass to be deformed, which will lead to the contact and friction between the second hand and the watch cover, and eventually cause the watch not to go. The method of maintenance is to go to a professional watch repair shop to open the cover for maintenance

8. Hello, a watch worth tens of thousands of yuan can't be repaired anywhere. If you want to avoid unnecessary trouble in the future, I suggest that you go to an authorized repair center to repair it. For watch repair and maintenance, every brand has its own authorized repair and maintenance. You can log in (for example, Rolex watch, you can log in to Rolex official website), and there is a consultation telephone on the website, You can ask where the nearest authorized maintenance point is. Let's put it this way. If your watch is not repaired at the authorized maintenance point, the company that owns the watch will not be responsible for any problems in the future. This is stated in the list signed when buying the watch. I hope you can understand this.

9. Watch repair address: No. 1, East Chang'an Avenue, Dongcheng District, Beijing Beijing East Plaza Xintiandi shopping mall first floor SS02B
advisory telephone: 010-53368270

1, dial scratches
watches are often worn on the hand, scratches are also common, if not very serious, you can first drop one or two drops of water on the dial, then squeeze a little toothpaste rub. The scratch will disappear and the dial will look like a new one. In addition, the choice of toothpaste is also particular, to choose toothpaste without particles, to avoid the second scratch on the dial
2. Watch strap cleaning
because of frequent sweating in summer or ring sports, the sweat stains on the belt are difficult to clean, which will proce peculiar smell after a long time. When the watch strap has a peculiar smell, you can use a toothbrush with a proper amount of soapy water, quickly brush the watch strap, and then use a slightly wet cloth to wipe it. In order to avoid the penetration of soapy water into the cortex, the whole process should be completed within 20 seconds. In addition, you can also apply some leather oil on the watch strap. Leather oil has a protective effect on the watch strap
3. Watch is affected with damp
after many things are affected with damp, the first thing you think of is to take them to the sun or blow them with a hair dryer. These methods are not suitable for watches. If the watch is wet, dry cotton can be pressed on the watch and baked with 40 Watt electric bulb for 5 minutes. The moisture in the watch can be evaporated completely. Do not bake the watch directly near the fire, so as not to deform the watch mirror. But if there are water stains on the inside of the watch mirror or on the dial, you must go to a professional organization to deal with them
4. Magnetic field causes errors
for time errors, most of the reasons are caused by the magnetic field in life. Such as audio, electrical appliances, watches should not be placed next to audio, TV and other electrical appliances with high magnetic field to avoid magnetization. If it is affected, you can find a piece of iron that is not magnetized and has a circle shape in the middle, and slowly put the watch through the iron circle, so that the magnetism on the watch will be absorbed by the iron; You can also put the watch on a clean iron plate that is not magnetized, so that the magnetism of the watch will graally disappear after two days.

10. How to maintain the accuracy of mechanical watch: [ruizuan Tianjin famous watch customer service center]
a. the travel time accuracy of mechanical watch can not be achieved or maintained through correction. Why do you say that? Because the travel time of a mechanical watch is constantly changing, it can be temporarily accurate in a spring's elastic state, fixed position, and temperature environment, which will change compared with another situation. In other words, even if the watch is corrected to a second, it will not be maintained, and the accuracy will always change in the instantaneous and fluctuating. Moreover, there are many other factors that affect the accuracy of watches. The watch errors we see are only the actual errors and the average errors per unit time
B. the watch has the best travel time accuracy when the spring is full. If you want to make your watch accurate, you must wind it as full as possible, which is more important for automatic watches. Because the tightening degree of the automatic watch spring is directly related to the wearing time and movement, the premise is to ensure that there is a sufficient amount of movement
C. watches have different travel time accuracy in different positions. This is the so-called watch position error. When a good watch leaves the factory, it should be tested in three temperatures and five directions. The five positions are: face up (dial up), face down, handle down (3:00), handle left (12:00), handle up (9:00). Only the right position (6:00) is not commonly used (unless you bring the watch to the palm or right hand). According to statistics, most people spend about 35% of their time on the surface of their hands, 30% on the left, 25% on the bottom, and 10% on other positions in a day. Therefore, the speed trend of watches can be corrected by using the different accuracy errors of watches in different positions
D. make an observation test first, and then record it. The test method is very simple. First, wind up the watch, and then aim at the hour, minute and second of the watch to be tested with a standard time to synchronize them. First, place it in a plane position and walk for 24 hours. Then compare the error with the standard time and record it. Repeat the above process in turn, and test the position of the watch under the face, under the handle, left and up the handle, and record them. For example: the static test results are: face + 20 seconds / day, face + 20 seconds / day, handle - 5 seconds / day, handle left + 25 seconds / day, handle up + 10 seconds / day, then the actual wearing travel time error of the watch is + 15 seconds / day
E. take off the watch at night and choose the position of the watch to correct the error. Taking the above example as an example, it is obvious that the watch handle should be placed downward at night to help rece the accumulated error of the watch's travel time. Only when you have an accurate understanding of the causes of watch errors and the characteristics of your own watch errors, can it serve you better
[service address: room 3003, 30 / F, Tianjin International Financial Center building, 136 Chifeng Road, Heping District, Tianjin]