How to calculate the blanking force of cold rolled plate stampin

F impulse = KLT τ ， Where f -- blanking force, K -- coefficient; The safety factor is generally taken as 1.3 considering the wear of the cutting edge of the blanking die, the fluctuation of the clearance between the punch and the die (the variation or uneven distribution of the value), the lubrication condition, the variation of the mechanical properties of the material and the thickness tolerance, etc. L -- total length of blanking periphery, mm; T -- material thickness, mm; τ—— Material shear strength, MPa

{rrrrrrr}

extended data:

stamping advantages

1. High proction efficiency, convenient operation, easy to realize mechanization and automation. This is because stamping depends on the stamping die and stamping equipment to complete the processing. The stroke times of ordinary press can reach dozens of times per minute, and the high-speed pressure can reach hundreds or even thousands of times per minute, and each stamping stroke can get a stamping part

2, stamping, stamping die ensures the size and shape accuracy of stamping parts, and generally does not destroy the surface quality of stamping parts, and the life of dies is generally longer. So stamping quality is stable, interchangeability is good, and has the same characteristics. p>

3. Stamping can process parts with large size range and complex shape, such as the second hand of clock and watch, the longitudinal beam and panel of automobile, and the cold deformation hardening effect of material ring stamping, the stamping strength and stiffness are higher

The blanking force of the stamping is 1.3 factor X (34 + 34 + 132 + 82 + 27 + 47 + 82 + 20), perimeter x 2, material thickness x 310, stress = 37 tons

Blanking force is the pressure exerted by the punch on the sheet metal in the blanking process. It changes with the depth of the punch into the material (punch stroke). Generally speaking, the blanking force refers to the maximum value of the blanking force, which is one of the important basis for selecting the press and designing the die. When blanking with ordinary flat edge die, the blanking force F is generally calculated as follows: