R9270x mining calculation force
Check whether the graphics card is mine card or not, you can refer to the following three points:
1, st
when the graphics card is running, it needs heat dissipation, the heat dissipation is mainly the fan on the graphics card, so the st on the fan will give us some judgment. Generally speaking, the self used video card and fan will not always run at full speed. The cotton gauze of all kinds of textiles in the room is scattered, so the st on the fan is often mixed with cotton wadding
extended data:
the maintenance of the graphics card is as follows:
1. The chassis is well ventilated, which can protect the graphics card and all the hardware in the machine, and prevent the high temperature from causing the running speed to drop, crash or even burn. The machine room is hot. In summer, you can take down the side panel of the chassis to help heat dissipation, or add a fan to help heat dissipation. If conditions permit, it is recommended to use water cooling to improve the working efficiency of the graphics card
2. The interface of the graphics card and the display are connected correctly on the street, and the virtual connection is easy to be interrupted frequently or ignited, which will cause the interface of the graphics card to burn down.
3. The effect of overclocking on the graphics card is not very obvious. On the contrary, it is easy to cause a huge increase in heat and slow down or even burn down of GPU
4. Dust cleaning, no matter the Chaka or motherboard or other components, will inevitably proce st after a long time. It is necessary to remove the chassis and carry out st removal work to ensure the normal work of each component
reference: network bitcoin miner
seek adoption
1. Boot to the BIOS and enter the msiaferburner interface (as shown below), and the arrow points to the fan speed control project
extended information:
precautions when installing graphics card
1. Socket selection
< P >
first of all, there must be a separate graphics card interface on the computer integrated graphics card motherboard, because there are some integrated graphics card motherboards, without a separate graphics card jack, you can not expand the independent graphics card, so there is a separate graphics card jack, which is a prerequisite
< p. The two blue cards are the PCI slots for the graphics card. The two white cards in the middle are PCI slots for things like sound cards. In recent years, the PCI slot on the motherboard has become more and more common, and its golden finger bar is on the left
The control panel of NVIDIA graphics card does not provide the corresponding fan speed regulation function. If NVIDIA graphics card supports automatic speed regulation, RivaTuner can be used to complete manual speed regulation
in the RivaTuner 2.24 interface, click the position shown in the figure to enter the frequency and fan speed adjustment interface, and then select the fan subtab to adjust the speed of the video card fan (manual and automatic speed adjustment modes can be selected from the drop-down menu in the upper right corner), which can be adjusted from 25% to 100%, pull the slider, and then click "application" in the lower right corner
this is the end of the speed regulation method of CPU and video card fan. When do you need speed regulation. When the fan noise is too high and the temperature of CPU or graphics card is below 60 ℃, we can consider recing the fan speed to rece the noise; When you feel that the temperature of CPU or graphics card is too high, or even crash and restart, please turn the fan speed to the highest. The system is unstable, and the lower the noise is useless. Of course, the front also explained how to set the method of automatic speed regulation, if you don't like manual speed regulation, then directly choose automatic
Enter PC health monitor setting interface