Is Xinhua wealth management center worth visiting
Publish: 2021-05-25 10:07:47
1. Wenzhou Niushan North Road Passenger Transport Center
2.
It's very good. It's just that the price was a little higher when it first came out. Now it's back to the normal price, because it's also to make way for new procts
3. The new APU, or ryzen g, is not recommended to use a good motherboard. The reason is that the built-in Vega takes up eight pcies, which makes the second PCI x16 slot of the motherboard unusable. The m-atx version is recommended, because the lack of pcies affects the scalability. You don't need to buy a large board, B350 and x370. The A320 chipset is enough, and the most expensive A320 is about 500
the vega11 of 2400g has no hbm2 video memory and needs to rely on memory for video memory. Therefore, its performance is affected by the frequency of memory. If you can afford it, you should try to buy high frequency memory. But at present, DDR4 high frequency memory is a sky high price. Considering the price and the original intention of purchasing 2400g, high frequency memory is not recommended. At present, the cheapest 8GB DDR4 has between 500 and 600, But because APU depends on memory, it is better to use two channels
however, I would like to add that the price of ryzen 1400 in JD is less than 1000, and the cheapest gt1030 is more than 500, and Taobao is only 400, 2400g. At present, it's 1200 +. If you don't plan to upgrade Duxian in the future, you can buy 2400g. If you plan to upgrade Duxian, I suggest 1400 + gt1030. As mentioned above, vega11 integration takes up 8 pieces of PCI, In the future, if you plan to upgrade it, it will be affected. In addition, vega11 will not only improve the performance of gt1030 at most, but also be restricted by memory.
the vega11 of 2400g has no hbm2 video memory and needs to rely on memory for video memory. Therefore, its performance is affected by the frequency of memory. If you can afford it, you should try to buy high frequency memory. But at present, DDR4 high frequency memory is a sky high price. Considering the price and the original intention of purchasing 2400g, high frequency memory is not recommended. At present, the cheapest 8GB DDR4 has between 500 and 600, But because APU depends on memory, it is better to use two channels
however, I would like to add that the price of ryzen 1400 in JD is less than 1000, and the cheapest gt1030 is more than 500, and Taobao is only 400, 2400g. At present, it's 1200 +. If you don't plan to upgrade Duxian in the future, you can buy 2400g. If you plan to upgrade Duxian, I suggest 1400 + gt1030. As mentioned above, vega11 integration takes up 8 pieces of PCI, In the future, if you plan to upgrade it, it will be affected. In addition, vega11 will not only improve the performance of gt1030 at most, but also be restricted by memory.
4. How high can low-end procts be? It's between 4w-5w partitions.
the premise is that you need al channel memory to run more than 4W, otherwise it's more than 3W.
40000 graphics card Master Lu FPS is about 50
the premise is that you need al channel memory to run more than 4W, otherwise it's more than 3W.
40000 graphics card Master Lu FPS is about 50
5. In fact, second-hand is not untouchable, otherwise many people used 2400g / 2200g light machine before, and then changed to three generations of sharp dragon. Where is their APU? But there are still risks, to the regular store this budget may have to compress the configuration
6. What time is QT? Compile with GCC. But use QT tools to create makefile files. Generally, it is the qmake tool that comes with QT. First, write CPP and header file, then execute qmake - project, qmake and make in the current directory to compile.
7. qmake -project? The. Pro file already exists! Directly run qmake or qmake snake.pro or qmake - makefile snake.pro. Decompress and do the following steps: $qmake $make to find the executable file (not. O, no suffix). Generally, if target is not set in snake.pro, the default executable file is snake
8. QT is based on message slot mechanism
similar to MFC, you can handwrite buttons or text boxes on the interface, or use QT's own drag and drop tool. I used to write FTP server and client with QT4, which was basically written in C + + and then compiled with makefile. The basic technology is implemented with TCP + concurrent operation
it's not too difficult for you to find corresponding examples on the Internet ~ ~
I wish you a smooth study!
similar to MFC, you can handwrite buttons or text boxes on the interface, or use QT's own drag and drop tool. I used to write FTP server and client with QT4, which was basically written in C + + and then compiled with makefile. The basic technology is implemented with TCP + concurrent operation
it's not too difficult for you to find corresponding examples on the Internet ~ ~
I wish you a smooth study!
9. Do: $qmake $make find the executable file (not. O, no suffix). Generally, if target is not set in snake.pro, the default executable file is snake
10. 1. Make sure that QT environment is installed in Linux
2. Enter your program directory and run / usr / local / Qt_ install/bin/qmake xxxx.pro Where / usr / local / Qt_ Install is the QT installation directory. Xxxx.pro is the bin file generated by the pro file
3 running make
4 in your application
2. Enter your program directory and run / usr / local / Qt_ install/bin/qmake xxxx.pro Where / usr / local / Qt_ Install is the QT installation directory. Xxxx.pro is the bin file generated by the pro file
3 running make
4 in your application
Hot content