Huzhou central hospital to which address

1. My roommate said that his mobile phone was broken and didn't ring for several days. Let me have a look at it. I studied it carefully for a while and smashed it on the ground. I was excited and said: listen! It's ringing!

2. Unless there is a problem with the motherboard, it is not recommended to swipe the BIOS. There is a high probability of failure. Let me tell you how to swipe the BIOS:
1. Change the file name after downloading and decompressing
2. Download the BIOS corresponding to the personal motherboard and put it in the root directory of Disk C after decompressing
3. Restart the computer and press F4
4. Select the BIOS file to start swiping and shut down automatically after swiping
5 Note: ring the upgrade process, the power cannot be cut off. Don't use winflash to brush the BIOS in the system, it is easy to have problems and difficult to solve.

3. Try inserting the fan again or replace it

4. Set the CPU frequency to manual mode
adjust the frequency doubling to 44
turn off the CPU energy saving option
see if you can enter the system and run pm95 stably
if you can't, continue to enter the BIOS and adjust the voltage
add a little experiment until you can stably pass the blue screen roast chicken
if you don't know more, you can ask me what the God is

5. Virtual billing currency of mobile animation procts

6. 1. Check whether the jumper cap in the chasis pin on the motherboard is still on the "chassis signal" and "ground" pins

2. If it is still on two pins, it is necessary to check whether the jumper cap is broken (if the copper ring on the jumper cap falls off or is not pressed in place, it will also cause the above phenomenon)

3. If you still can't, pull out the chassis skipping cap on the motherboard and plug it into the chassis signal and GND skipping pin again to turn off this function. It can also be solved by restarting the motherboard after discharging

4. Some motherboards (BIOS) have the option to set "chasis on / off". If you have this option, you can directly turn it off to solve this problem

note: the default value of the motherboard is to put the jumper cap on the two pins marked "chassis signal" and "ground" in the chasis pin. If you want to use this function, you can directly remove the jumper cap from the two pins.

7. Animation name: Silver tomb keeper. Please accept.

8. After becoming a member, you will get one every day when you log in
and you can exchange 1000 silver melon seeds for one every day

9. Unknown_Error