Non metallic mine shaft lifting equipment needs to go to the qua

1.

Quality complaints:

1. submit to the functional department

2. under the leadership of the functional department, the seller and the consumer jointly seal the samples and sign

3. and jointly send the sealed samples to the qualified quality inspection agency

4. to fill in the entrusted inspection form (determine the inspection items Inspection basis and other relevant information) and sign

5. to pay the inspection fee in advance (ultimately borne by the responsible party)

6. the quality inspection agency carries out the inspection

7. to receive the inspection report at the agreed time (the inspection report can be used as the basis for handling quality disputes) joint entrustment: seller Consumers jointly send unused goods (the food must be intact packaged food without damaging the prepackage) to the qualified quality inspection agency

8. to fill in the entrusted inspection form (to determine the inspection items Inspection basis and other relevant information) and jointly sign

9. advance the inspection fee (ultimately borne by the responsible party)

10. receive the inspection report at the agreed time (the inspection report can be used as the basis for handling quality disputes) general entrustment: send the unused goods (the food must be intact packaged food without damaging the prepackage) to the qualified quality inspection agency

11. to fill in the entrustment Inspection sheet (determine the inspection items, inspection basis and other relevant information) and sign

12. pay the inspection fee

13. receive the inspection report at the agreed time (the inspection report is only responsible for the samples sent, and has little effect on the handling of quality disputes)

< / OL >

2. Unknown_Error

3. The grounding device of mining equipment is usually tested once a year, which is the usual practice of equipment and device. For specific standards, please refer to local standards, for example: DB37 / - 7 32h-2018 mine power supply grounding test specification
in fact, as a safety manager, depending on the safety sensitivity is not restricted by the inspection period, so as to achieve safety first. For example. How often does the helmet check? Does the car brake check only once at the end of the year? What about seat belts? What about the extended leakage protection device? What about lightning arresters
most of the time, electricians should form a good habit to make a general judgment by measuring the phase, ground voltage and phase zero voltage ring maintenance.

4.

The current national and international technical regulations do not stipulate the validity period of the test report. The iecee-cb system of international certification organization is to regulate the mutual recognition of test reports by certification bodies of various countries and improve the effectiveness of the reports. It is suggested that the test reports which are valid for more than three years or have been modified for more than three times should be submitted for re verification

1. The so-called "validity period" of the inspection report actually refers to the validity of the inspection report (the inspection report only represents the quality status of the inspected batch, which has nothing to do with the shelf life. If you look at the type report, it is valid within half a year or one year),

2. It should be said that the inspection report is for the inspected (spot check) batch of procts, The inspection results (conclusions) should always be valid (of course, if the inspection report is wrong, don't mention it)

3. When the batch of procts have been consumed by consumers, the historical mission of the inspection report is basically completed, and the remaining role is to conct quality traceability for future reference

extended data:

the main contents of the inspection report include the following aspects:

1, the incoming acceptance inspection of raw materials, purchased parts and outsourced parts and the qualified rate index

The qualified rate, repair rate, scrap rate, degradation rate and the corresponding amount loss of the procts in the factory inspection are

2

According to the average qualified rate, repair rate, scrap rate, corresponding amount loss and arrangement chart of workshop and sub group

4

5. Report on disposal of unqualified procts

6. Investigation, analysis and treatment report of major quality problems

7

8

5.

The validity period of the inspection report is generally two years, or six months beyond the shelf life of the proct

the test report refers to the proct test report, which gives the test data and standard compliance conclusion. According to the applicability, the conclusion can be divided into two categories: the test sample is self delivered by the enterprise, so the conclusion is only valid for the delivered sample. Test is for a batch of procts, using count sampling or percentage sampling, so the test conclusion is effective for the batch of procts

extended data:

the proct certification certificate issued according to the test report is valid because the proct certification not only involves proct design, but also enterprise quality management. Therefore, once a year of supervision, the validity period of the certification certificate is usually four years. The expiration of the certificate means that the test report issued for this certification is invalid

Therefore, the current national and international technical regulations do not stipulate the validity period of the test report. The iecee-cb system of international certification organization is to regulate the mutual recognition of test reports by certification bodies of various countries and improve the effectiveness of the reports. It is suggested that the test reports which are valid for more than three years or have been modified for more than three times should be submitted for re verification

6. The special equipment mentioned in the law of the people's Republic of China on the safety of special equipment refers to boilers, pressure vessels (including gas cylinders), pressure pipelines, (), lifting machinery, passenger ropeways, large amusement facilities, special motor vehicles in the field (factory), and other special equipment applicable to this law as stipulated by laws and administrative regulations
A. elevator B. elevator C. escalator
2. The safety work of special equipment should adhere to the principles of (), prevention first, energy conservation and environmental protection, and comprehensive treatment< Safety first, benefit first, and efficiency first. 3. Safety technical specifications for special equipment are formulated by the Department responsible for safety supervision and management of special equipment< The National People's Congress, the State Council and the State Work Safety Commission have taken out the special equipment safety liability insurance
A. compulsory B. non compulsory C. encourage
5. The state establishes () special equipment recall system
A. elimination B. scrapping C. defects
6. Special equipment () units should establish record system for inspection and acceptance of special equipment
A. sales B. proction C. design
7. The use management and maintenance obligations of special equipment ring the lease period shall be undertaken by the special equipment () unit, unless otherwise stipulated by law or agreed by the parties< The unit using special equipment shall register with the Department in charge of the safety supervision and management of special equipment and obtain the registration certificate before or within () after the special equipment is put into use< 9. Special equipment () units shall establish special equipment safety technical archives< 10. The user of special equipment shall, in accordance with the requirements of safety technical specifications, put forward regular inspection requirements to the special equipment inspection organization before the expiration of the validity period of inspection
A. half a month B. one month C. two months
11. The maintenance of the elevator shall be carried out by the elevator () unit or the installation, transformation and repair unit licensed in accordance with this law
A. design B. use C. manufacture
12. Those who violate the special equipment safety law of the people's Republic of China and engage in the proction of special equipment without permission shall be ordered to stop proction, the special equipment illegally manufactured shall be confiscated, and a fine of more than 100000 yuan and less than () yuan shall be imposed; If there is any illegal income, the illegal income shall be confiscated; If the installation, transformation or repair has been carried out, it shall be ordered to restore to its original state or the unit that has obtained the license shall be ordered to re install, transform or repair it within a time limit< If the license is revoked according to law in violation of the special equipment safety law of the people's Republic of China, the Department in charge of the safety supervision and management of special equipment will not accept the new license application within () years from the date of revocation of the license< The special equipment safety law of the people's Republic of China has been adopted by the third meeting of the Standing Committee of the 12th National People's Congress of the people's Republic of China on June 29, 2013, and shall come into force as of
A. on January 10, 2014 B. on January 1, 2014 C. on March 1, 2014
15. For elevator users in crowded places, () conct at least one rescue drill
A. every quarter B. every half year C. every year
16. The elevator maintenance unit shall arrive at the scene in time for rescue after receiving the elevator trapped fault, and the arrival time of the municipality directly under the central government or the city divided into districts shall not exceed (), and the arrival time of other areas shall not exceed 1H generally
a.10 min b.30 min c.40 min
17. If the elevator maintenance unit fails to carry out the elevator maintenance in accordance with the provisions of the special equipment safety law and the requirements of safety technical specifications, it shall be fined< (18) the Department in charge of safety supervision and management of special equipment shall supervise and manage the safety of special equipment nationwide
A. The State Council C. The General Administration of quality supervision, inspection and quarantine C. the national special equipment inspection center
19. The qualification certificate of special equipment operators should be applied to the issuing department for reexamination before the expiration of validity< The elevator should be cleaned, lubricated, adjusted and inspected at least once
A. every 10 days B. every 15 days C. every 20 days
21. Pressure vessels should be inspected regularly for the first time in () years
a.1 B.2 C.3
22. The following () equipment is not special equipment
A. explosion proof electrical B. sightseeing bus for tourist attractions C. medical oxygen chamber
23. There are major hidden dangers in special equipment, so the manager forces the operation, and the operator can ()< The special equipment that has passed the supervision and inspection of Taizhou special inspection center shall be registered with the special equipment safety supervision and administration department (Xianju County Bureau of quality and technical supervision) within () days after it is put into use
a.90 b.30 c.60
25. The proction of special equipment includes design, manufacture, installation and maintenance< In case of special equipment accident, the person in charge of the accident unit shall report to the quality and technical supervision department at or above the county level and relevant departments in () after receiving the relevant report from the accident site
A.3 hours B.2 hours C.1 hours
27. Special equipment users should bear () responsibility in special equipment management
A. technical support B. supervision C. main body
28. Special equipment elevator safety management personnel certificate () shall be reviewed once a year< The equipment should be scrapped and cancelled to the original registration authority
A. There are serious accident hidden danger, no transformation and maintenance value; B. beyond the inspection period; C. There have been general accidents; D. management confusion; whether to supply water to the boiler in an emergency in case of serious water shortage< B. not C. according to the actual situation
2. Judgment question
31. The charge for administrative license and inspection of special equipment shall be carried out in accordance with the provisions of laws and administrative regulations This law is also applicable to the supervision and administration of the safety of special equipment used in military equipment, nuclear facilities and aerospace ×
33. Users of special equipment shall supervise and inspect the special equipment they use and make records ×
34. Before the passenger ropeway and large amusement facilities are put into use every day, their operation and use units shall carry out trial operation and routine safety inspection, and check and confirm the safety accessories and safety protection devices √)
35. The boiler user shall carry out boiler water (medium) treatment according to the requirements of safety technical specifications, and accept the regular inspection of special equipment inspection agency In case of major accidents of special equipment, the departments in charge of safety supervision and management of special equipment of the people's governments of provinces, autonomous regions and municipalities directly under the central government shall, together with relevant departments, organize accident investigation teams to investigate ×
37. Special equipment inspection and testing institutions and their inspection and testing personnel can engage in the proction and business activities of special equipment, and can recommend or supervise the proction and marketing of special equipment ×
38. The installation, transformation and repair of the elevator must be carried out by the elevator manufacturer or the unit authorized by it to obtain the corresponding license in accordance with this law √)
39. If the elevator manufacturer entrusts other units to carry out the installation, transformation and repair of the elevator, it shall provide safety guidance and monitoring for the installation, transformation and repair, and carry out verification and debugging according to the requirements of safety technical specifications √)
40. The safety management personnel of the elevator using unit shall supervise the installation, transformation, maintenance and maintenance of the elevator, and sign the maintenance records of the maintenance unit for confirmation √)
41. The elevator use Manager (refers to the unit or indivial with elevator management rights and obligations) shall be determined according to the principle of "who owns, who is responsible, who owns and who is in charge". Elevators without elevator use managers shall not be put into use √)
42. The safety supervisors of the Department responsible for the safety supervision and management of special equipment should be familiar with the relevant laws and regulations, have the corresponding professional knowledge and work experience, and obtain the administrative law enforcement certificate for the safety of special equipment √)
43. The special equipment proction unit must obtain the special equipment proction license issued by the Department responsible for the safety supervision and management of special equipment of the local people's government ×
44. The local people's governments at or above the township (town) level and their departments in charge of the safety supervision and management of special equipment shall organize the formulation of emergency plans for special equipment accidents in their respective administrative areas according to law, and establish or incorporate them into the corresponding emergency response and rescue system ×
45. Safety management personnel, testing personnel and operators of special equipment shall obtain corresponding qualifications according to relevant national regulations before they can engage in relevant work When the Department in charge of the safety supervision and management of special equipment implements the safety supervision and inspection, more than three special equipment safety supervisors shall participate in the inspection and proce valid administrative law enforcement certificates for the safety of special equipment ×
47. The construction unit of special equipment shall store the relevant technical data and documents such as installation, transformation and repair of special equipment in the safety technical archives of the special equipment ×
48. The special equipment belongs to the common ownership. The common owners may entrust the property service unit or other managers to manage the special equipment, and the trustee shall perform the obligations of the unit using the special equipment stipulated in this Law and bear the corresponding responsibilities. If the co owners fail to entrust, the co owners or the actual managers shall perform the management obligations and bear the corresponding responsibilities After receiving the regular inspection requirements, the special equipment inspection organization shall timely carry out the safety performance inspection in accordance with the requirements of the safety technical specifications. The unit using special equipment shall place the regular inspection mark at a prominent position of the special equipment √)
50. If the special equipment needs to be modified or repaired according to the regulations, it should be registered before it can be used (3) multiple choice questions
51. In the special equipment safety law, the unit using special equipment () is ordered to stop using the equipment and fined not less than 30000 yuan but not more than 300000 yuan
A. use the equipment that has not been proced under license, has not been inspected or has not passed the inspection, or the equipment that has been eliminated or scrapped by the state order
B. if the special equipment fails or has abnormal conditions, it has not been comprehensively inspected to eliminate the potential accident, For the special equipment that is still in use,
C. The special equipment that is in use is not registered according to the regulations,
D. the special equipment that is sold by the special equipment sales unit has serious potential accident, no value of transformation or repair, or meets other scrapping conditions specified in the safety technical specifications, fails to fulfill the obligation of scrapping according to law, and has not gone through the proceres of cancellation of the use registration certificate, It shall meet the requirements of safety technical specifications and relevant standards, and its () related technical data and documents shall be complete
A. design documents B. proct quality

7. Tower crane, elevator and mobile crane are used once a year, among which the rubber tyred container gantry crane is used once every two years; Light and small lifting equipment, bridge crane, gantry crane, portal crane, cable crane, mast crane, railway crane, jib crane and mechanical parking equipment are used once every two years, and the crane for lifting molten metal and hot metal is used once a year< Article 1 in order to standardize the regular inspection of lifting machinery in use, these rules are formulated in accordance with the regulations on safety supervision of special equipment and regulations on safety supervision of lifting machinery
Article 2 the regular inspection of lifting machinery stipulated in these rules is a special equipment inspection and testing institution (hereinafter referred to as inspection institution) approved by the General Administration of quality supervision, inspection and Quarantine (hereinafter referred to as AQSIQ) on the basis of regular routine maintenance (hereinafter referred to as maintenance) and self inspection by the lifting machinery user, According to these rules, the inspection of the cranes in use included in the use registration shall be concted
Article 3 these rules are applicable to the lifting machinery within the scope of the regulations on safety supervision of special equipment. The lifting machinery included in the catalogue of special equipment shall be inspected regularly
the lifting machinery included in the catalogue of special equipment, which is not subject to installation supervision and inspection, and which is delivered directly to the user in the form of complete machine, shall be inspected by the local inspection and testing institution in accordance with the inspection items, contents, requirements and methods specified in these rules (i.e. inspection before the equipment is put into use, referred to as the first inspection), The use registration can be handled only after it is qualified. See Annex A for the list of lifting machinery to be inspected for the first time
Article 4 the main technical requirements of this regulation are based on the relevant safety technical specifications for special equipment and their corresponding standards
Article 5 the periodic inspection cycle of lifting machinery in use is as follows:
(1) tower cranes, elevators and mobile cranes are inspected once a year, among which the rubber tyred container gantry cranes are inspected once every two years
(2) light and small lifting equipment, bridge crane, gantry crane, portal crane, cable crane, mast crane, railway crane, jib crane and mechanical parking equipment are used once every two years, and the crane for lifting molten metal and hot metal is used once every year
the items of rated load test, static load test and dynamic load test in performance test must be carried out ring the first inspection
in the process of inspection, for lifting machinery with special working environment, the inspection institution can appropriately shorten the periodic inspection cycle with the approval of the provincial quality and technical supervision department, but the shortest cycle shall not be less than 6 months
note 1: the regular inspection date is calculated based on the qualified inspection date of major maintenance supervision, first inspection and re inspection after shutdown, and so on (the next regular inspection date does not change e to re inspection, unqualified rectification or overe inspection in this cycle)
Article 6 the items and requirements of the regular inspection and the first inspection of the hoisting machinery shall be carried out in accordance with the items, contents, requirements and methods of the regular inspection of the hoisting machinery (see Annex B)
Article 7 users and inspection institutions shall implement these rules. The user is responsible for the quality of maintenance and self inspection, and the inspection organization is responsible for the quality of inspection work and the correctness and authenticity of inspection conclusions< Article 8 inspection institutions shall, in accordance with these rules, formulate inspection plans (inspection instructions) including inspection proceres, inspection items (including contents, the same below), inspection methods and requirements, inspection records, etc. to guide specific inspection work. The inspection plan shall be approved by the technical director of the inspection institution
the inspection procere at least includes preparation before inspection, on-site inspection, defect treatment, summary of inspection results, conclusion judgment and issuance of inspection report, etc. If the inspection items set in the rules can not meet the safety performance requirements of lifting machinery or other special circumstances, the inspection institution can add inspection items according to the specific circumstances. The additional inspection items shall be reported to the provincial quality and technical supervision department for record before implementation.

8. It should not be finalized yet. Now the implementation is generally decided by the provinces themselves. There is no unified statement from the State Administration.

9. It refers to the operation of ore drawing, dam construction, dam inspection, flood pumping and seepage drainage facilities of tailings pond. It is suitable for tailing operation of metal and nonmetal mines. It refers to the operation of lifting equipment in metal and nonmetal mines, transportation of personnel, ore, gangue and materials, and patrol inspection and operation record. It is suitable for hoists in metal and nonmetal mines, including shaft and blind shaft hoists, inclined shaft and blind inclined shaft hoists, as well as windlass hoists in open pit mines. Refers to the blasting operation in the open air and underground.

10.

Work direction of inspection institutes (institutes) under the National Bureau of quality supervision or special equipment inspection institutes (institutes):

by the end of 2020, complete the integration pilot work of special inspection institutions; Establish a special equipment inspection system and operation mechanism with clear positioning, perfect governance and in place supervision. In principle, public institutions will no longer engage in operating special equipment inspection (except for the existing special inspection institutions of public institutions in remote areas)

to expand and strengthen three to five special inspection groups with strong technical ability, high service level, good scale efficiency and certain international influence led by state-owned assets, such as China special inspection group, to form a socialized high-tech service system of special equipment inspection and detection with reasonable layout, strong strength, fairness and credibility< br />