Liuzhi also goes to the safety training center
Publish: 2021-05-19 04:47:55
1. To the special certificate training school can, you can also ask the Safety Supervision Bureau, or the technical supervision and Administration Bureau, they will tell you, where is the training school, can test
2. If you want to apply for the safety officer certificate, you must apply to the AQSIQ for the examination, and you can only apply for the safety officer certificate after passing the examination
safety training certificate, it needs unit training.
safety training certificate, it needs unit training.
3. The main training places are engineering training bases in various provinces and cities. Of course, there are also private training courses, which can be selected according to their own conditions< Requirements and qualifications for Safety Officer:
a person in charge of the enterprise (legal person, general manager, deputy manager in charge of safety): college degree or above, with intermediate title or above Except the legal representative)
B project leader (Project Manager): senior high school degree or above, junior professional title or above; Or have the qualification certificate of construction engineer
C full time safety officer: senior high school degree or above, or more than 5 years of working experience (i.e. over 23 years old)
teaching materials for safety officers: teaching materials for the examination syllabus and internal examination questions of the Construction Commission, etc
registration and method for security officer examination (2010):
1. One of ID card
2. One of academic certificate
3. A of relevant professional title certificate
6 recent color photos of 4 and 1 inch
5. Fill in the registration form for examination of professional management personnel in construction enterprises and institutions The registration form can be downloaded and printed on the Internet or requested from the registration office.)
note: the application form needs to be stamped with the official seal of the company and printed on one page (front and back).
a person in charge of the enterprise (legal person, general manager, deputy manager in charge of safety): college degree or above, with intermediate title or above Except the legal representative)
B project leader (Project Manager): senior high school degree or above, junior professional title or above; Or have the qualification certificate of construction engineer
C full time safety officer: senior high school degree or above, or more than 5 years of working experience (i.e. over 23 years old)
teaching materials for safety officers: teaching materials for the examination syllabus and internal examination questions of the Construction Commission, etc
registration and method for security officer examination (2010):
1. One of ID card
2. One of academic certificate
3. A of relevant professional title certificate
6 recent color photos of 4 and 1 inch
5. Fill in the registration form for examination of professional management personnel in construction enterprises and institutions The registration form can be downloaded and printed on the Internet or requested from the registration office.)
note: the application form needs to be stamped with the official seal of the company and printed on one page (front and back).
4. You can find special vocational training schools, you can also go to the technical supervision and Administration Bureau or safety supervision bureau to ask them, where there is such a training school, they will tell you the specific address, or telephone number
5. I know that computer training center. I am a student from there. I really didn't blow it. At first, I didn't have any design foundation. Now I've worked in an advertising company for less than two months. I'm very diligent. I go every night. The teacher teaches me by hand. I'll point out what's wrong. And tell me the quickest way and skill, not the book step by step.
6. Three level safety ecation examination questions
Name: unit: Score:
1. Fill in the blanks: (1 point for each question, 25 points in total)
1. Three level safety ecation system is the basic system of enterprise safety ecation, and three level ecation refers to (), (), ()
2. China's safety proction policy is (), ()
3 Nowadays, the three major safety themes adopted by governments all over the world to enforce their own citizens by means of coercion are (), (), ()
4. China's fire protection policy is (), ()
5. The time when the proction safety law of the people's Republic of China is officially promulgated and implemented is ()
6. The time when the law of the people's Republic of China on prevention and control of occupational diseases was passed is ()
7. The activities of "three no injuries" refer to (), (), ()
8. The factors considered in risk identification and evaluation are (), (), ()
9. The phenomenon of "three violations" in the proction process refers to (), (), ()
10 The occupational disease prevention and control work adheres to the policy of () ()
2. Multiple choice questions (2 points for each question, 10 points in total)
1. The four safety colors specified in the national standard (gb2893-82) are ()
A, red, blue, yellow, green B, red, blue, black, green C, red, green, yellow, green D, white, blue, yellow, green
2 The main diseases caused by welding operation are ()
A, welder's pneumoconiosis B, tracheitis C, electro-optic ophthalmia D, skin diseases
3. Leakage protection device is mainly used for ()
A, recing equipment and line leakage B, preventing power supply interruption
C, recing line loss D, preventing personal electric shock and leakage fire accidents
4 When working in a closed place (O2 concentration is 18%, toxic gas exceeds the standard and the air is not in circulation), the personal protective equipment that should be selected is ()
A, anti-virus mask B, anti-virus mask with corresponding filter C, respiratory protector for air supply D, st mask
5. Among the following isolation safety tools, those that belong to auxiliary safety tools are ()
A, insulating rod B Insulation baffle C, insulation shoe D, insulation clamp
3. Short answer questions (10 points for each question, 40 points in total)
1
2. In addition to work clothes and shoes, what labor protection articles should workers in the following five types of work wear
lathe worker: driller:
crane worker:
electric welder:
steam welder:
3. What are the three risk rection measures
4. What should be paid attention to when putting out a fire with water< 4. Question and answer: (15 points for the first question and 10 points for the second)
1. What are the contents of "two understandings, three meetings and four memorizations" in fire safety management
2. What are the violations of equipment operation<
answers:
1. Factory entrance ecation, workshop ecation and post (team) ecation
2. "Safety first, prevention first"
3. Health, safety and environment
4. Prevention first, combination of prevention and elimination
5. November 1, 2002
6. October 27, 2001
7. Don't hurt yourself, don't hurt others, don't be hurt by others
8 Property
9. Illegal command, illegal operation, violation of labor discipline
10. Prevention first, combination of prevention and control, classified management, comprehensive treatment
1. A 2, a, C 3, D 4, C 5, C
3; When the live equipment is overhauled, the power is supplied continuously or the warning sign is not hung at the distribution shape; Working at height or under the mechanized transportation equipment without safety helmet
2. Turner: wear goggles; Driller: wear safety helmet and gloves; Lifting worker: wear safety helmet and gloves
welders: wear protective masks and gloves; Steam welder: wear goggles and gloves
3 2) Limit the scope and time of the accident 3) Control the accident and rece the long-term and short-term impact of the accident
4 2) Oil fire cannot be put out 3) (4) the red metal can not be put out 5) Can not put out precision instruments, precious cultural relics file fire
four, two understand: (1) understand fire prevention and extinguishing knowledge 2) Understand the performance of fire equipment
three meetings: (1) call 119 for alarm and fire alarm 2) Be able to use fire fighting equipment 3) Four things to remember: (1) the fire unit, location and route must be clearly stated in the alarm 2) foam extinguishers must not extinguish electric fires; 3) 1211 fire extinguisher for Huiji and valuable equipment on fire 4) Using carbon dioxide fire extinguisher to prevent frostbite
2 2) When entering the mechanical equipment to repair the running parts, there is no person to monitor or repeatedly disconnect the power source 3) Start the equipment not of the type of work at will (4) operate the special operation independently without obtaining the certificate 5) Over limit use of equipment (6) non special operation personnel engaged in special operation (7) there are safety devices on the equipment, but not used when driving 8) Start the sealed equipment (9), arbitrarily remove the safety device of the equipment (10), and do not use the lifting and rigging as required.
Name: unit: Score:
1. Fill in the blanks: (1 point for each question, 25 points in total)
1. Three level safety ecation system is the basic system of enterprise safety ecation, and three level ecation refers to (), (), ()
2. China's safety proction policy is (), ()
3 Nowadays, the three major safety themes adopted by governments all over the world to enforce their own citizens by means of coercion are (), (), ()
4. China's fire protection policy is (), ()
5. The time when the proction safety law of the people's Republic of China is officially promulgated and implemented is ()
6. The time when the law of the people's Republic of China on prevention and control of occupational diseases was passed is ()
7. The activities of "three no injuries" refer to (), (), ()
8. The factors considered in risk identification and evaluation are (), (), ()
9. The phenomenon of "three violations" in the proction process refers to (), (), ()
10 The occupational disease prevention and control work adheres to the policy of () ()
2. Multiple choice questions (2 points for each question, 10 points in total)
1. The four safety colors specified in the national standard (gb2893-82) are ()
A, red, blue, yellow, green B, red, blue, black, green C, red, green, yellow, green D, white, blue, yellow, green
2 The main diseases caused by welding operation are ()
A, welder's pneumoconiosis B, tracheitis C, electro-optic ophthalmia D, skin diseases
3. Leakage protection device is mainly used for ()
A, recing equipment and line leakage B, preventing power supply interruption
C, recing line loss D, preventing personal electric shock and leakage fire accidents
4 When working in a closed place (O2 concentration is 18%, toxic gas exceeds the standard and the air is not in circulation), the personal protective equipment that should be selected is ()
A, anti-virus mask B, anti-virus mask with corresponding filter C, respiratory protector for air supply D, st mask
5. Among the following isolation safety tools, those that belong to auxiliary safety tools are ()
A, insulating rod B Insulation baffle C, insulation shoe D, insulation clamp
3. Short answer questions (10 points for each question, 40 points in total)
1
2. In addition to work clothes and shoes, what labor protection articles should workers in the following five types of work wear
lathe worker: driller:
crane worker:
electric welder:
steam welder:
3. What are the three risk rection measures
4. What should be paid attention to when putting out a fire with water< 4. Question and answer: (15 points for the first question and 10 points for the second)
1. What are the contents of "two understandings, three meetings and four memorizations" in fire safety management
2. What are the violations of equipment operation<
answers:
1. Factory entrance ecation, workshop ecation and post (team) ecation
2. "Safety first, prevention first"
3. Health, safety and environment
4. Prevention first, combination of prevention and elimination
5. November 1, 2002
6. October 27, 2001
7. Don't hurt yourself, don't hurt others, don't be hurt by others
8 Property
9. Illegal command, illegal operation, violation of labor discipline
10. Prevention first, combination of prevention and control, classified management, comprehensive treatment
1. A 2, a, C 3, D 4, C 5, C
3; When the live equipment is overhauled, the power is supplied continuously or the warning sign is not hung at the distribution shape; Working at height or under the mechanized transportation equipment without safety helmet
2. Turner: wear goggles; Driller: wear safety helmet and gloves; Lifting worker: wear safety helmet and gloves
welders: wear protective masks and gloves; Steam welder: wear goggles and gloves
3 2) Limit the scope and time of the accident 3) Control the accident and rece the long-term and short-term impact of the accident
4 2) Oil fire cannot be put out 3) (4) the red metal can not be put out 5) Can not put out precision instruments, precious cultural relics file fire
four, two understand: (1) understand fire prevention and extinguishing knowledge 2) Understand the performance of fire equipment
three meetings: (1) call 119 for alarm and fire alarm 2) Be able to use fire fighting equipment 3) Four things to remember: (1) the fire unit, location and route must be clearly stated in the alarm 2) foam extinguishers must not extinguish electric fires; 3) 1211 fire extinguisher for Huiji and valuable equipment on fire 4) Using carbon dioxide fire extinguisher to prevent frostbite
2 2) When entering the mechanical equipment to repair the running parts, there is no person to monitor or repeatedly disconnect the power source 3) Start the equipment not of the type of work at will (4) operate the special operation independently without obtaining the certificate 5) Over limit use of equipment (6) non special operation personnel engaged in special operation (7) there are safety devices on the equipment, but not used when driving 8) Start the sealed equipment (9), arbitrarily remove the safety device of the equipment (10), and do not use the lifting and rigging as required.
7. Guangzhou skills world, they study hard, class time with learning, and people around recognized
8. The training center was established in 2009, mainly responsible for the publicity and ecation of health and safety knowledge. Training units for socialized operation. Enhance the public's attention to health and strengthen the emergency response capacity of personnel in case of accidents. According to the demand of the unit
Hot content