Guangzhou north station to downtown
Publish: 2021-05-16 12:51:51
1. The south of Guangzhou must be closer to the urban area.
the south of Guangzhou is in Panyu, which is almost the urban area.
the north of Guangzhou is in Hua, which is far away...
there are buses in the south of Guangzhou to the urban area. It depends on where you go, because the city is very big
the south of Guangzhou is in Panyu, which is almost the urban area.
the north of Guangzhou is in Hua, which is far away...
there are buses in the south of Guangzhou to the urban area. It depends on where you go, because the city is very big
2. "Big Mac" is located in the geometric center of the Pearl River Delta
the new railway station is initially scheled to be completed and put into operation on January 30 this year
Guangzhou south railway station is located in Shibi village, Zhongcun Town, Panyu District, Guangzhou City, which is the southern end of the Wuhan Guangzhou line
it has always been called "Guangzhou south station" or "new Guangzhou station"
but its official name will be changed to "Guangzhou south station" in the future. Guangzhou south railway station is located in the geometric center of the Pearl River Delta, not far from the important cities in the region
it is convenient to connect with the future inter city rail of the Pearl River Delta
,
Guangzhou north railway station is located in Hua Xinhua Street, which is the original Hua station
< On January 30, Guangzhou south railway station was successfully opened, and the transportation facilities were built.
Guangzhou south bus station is located in Shibi south 2nd Road, Zhongcun Town, Panyu District, about 150 meters away from the South Railway Station
the temporary station is designed according to the standard of class III passenger station, but its main functional indexes meet or even exceed the construction requirements of class I station
there are bus, South Station Express, long-distance highway shuttle bus and taxi loading and unloading functional areas; The station covers an area of 23600 M2
(including 2250 m2 of station building area, 2000 m2 of station square and 12000 m2 of parking lot)
there are 12 ticket windows, 15 departure cards, 36 waiting cards and 9 bus cards<
the short line from Panyu to the Pearl River Delta is the main departure line of stations and yards,
it mainly covers Shenzhen, Dongguan, Huizhou, Zengcheng, Conghua, Foshan, Jiangmen, Zhuhai and other places in the province,
it also serves as the hub station for special line bus, Guangzhou Foshan special line, South Station Express line between Panyu city and villages, as well as the effective connection with buses and taxis in the city.
the new railway station is initially scheled to be completed and put into operation on January 30 this year
Guangzhou south railway station is located in Shibi village, Zhongcun Town, Panyu District, Guangzhou City, which is the southern end of the Wuhan Guangzhou line
it has always been called "Guangzhou south station" or "new Guangzhou station"
but its official name will be changed to "Guangzhou south station" in the future. Guangzhou south railway station is located in the geometric center of the Pearl River Delta, not far from the important cities in the region
it is convenient to connect with the future inter city rail of the Pearl River Delta
,
Guangzhou north railway station is located in Hua Xinhua Street, which is the original Hua station
< On January 30, Guangzhou south railway station was successfully opened, and the transportation facilities were built.
Guangzhou south bus station is located in Shibi south 2nd Road, Zhongcun Town, Panyu District, about 150 meters away from the South Railway Station
the temporary station is designed according to the standard of class III passenger station, but its main functional indexes meet or even exceed the construction requirements of class I station
there are bus, South Station Express, long-distance highway shuttle bus and taxi loading and unloading functional areas; The station covers an area of 23600 M2
(including 2250 m2 of station building area, 2000 m2 of station square and 12000 m2 of parking lot)
there are 12 ticket windows, 15 departure cards, 36 waiting cards and 9 bus cards<
the short line from Panyu to the Pearl River Delta is the main departure line of stations and yards,
it mainly covers Shenzhen, Dongguan, Huizhou, Zengcheng, Conghua, Foshan, Jiangmen, Zhuhai and other places in the province,
it also serves as the hub station for special line bus, Guangzhou Foshan special line, South Station Express line between Panyu city and villages, as well as the effective connection with buses and taxis in the city.
3. The first is the sound discrimination method. The older the ancient coins are, the more impurities such as tin and lead are lost, and the ller the sound is. On the contrary, the nearer the age, the clearer the sound
the second is to observe the copper color method. Generally, the materials of ancient coins can be divided into bronze, red copper, brass and white copper. Bronze coins are easy to break, while brass coins are not easy to break and wear. White copper is mostly used for sample coins. Before the Ming Dynasty, most of the coins were made of bronze. There was no brass coin. If you find brass coins before the Ming Dynasty, you should be more careful
the third is the boiling water method. Ancient coins are often attached with red and green rust or handed down black rust. The real money rust is formed by natural oxidation for a long time and has strong adhesion. The fake rust is easy to fall off by boiling water
the fourth is the steel needle test method. The rust of ancient coins is relatively hard. Press the tip of the steel needle for sewing down and down vertically, and when you let go, the steel needle will fall down immediately. Fake rust is often true rust, add adhesive and other things daub, there is a certain degree of elasticity, steel needle is not easy to fall down
style judgment. Each dynasty has its own style of coins, which can be used to identify whether the ancient coins belong to counterfeit. There is also a method of comparative edition. Early ancient coins were all made by hand, and even the mother coins used to make coins were also made by hand carving. Therefore, there are some differences between the coins. If as like as two peas of coins are found, their page is exactly the same, or even the local defects are not bad, they should be suspected of being forgery. The shape and size of ancient coins, the advantages and disadvantages of rough and fine proction form different shape and system characteristics, which provides a basis for identifying the authenticity of coins. For example, before the Han Dynasty, Yuan Qian had a flat back, while from the later Han Dynasty to the Ming Dynasty, most of the ancient coins had a deep back. But in the Western Han Dynasty, the three baht was flat back. In the Northern Zhou Dynasty, Sanpin (buquan, Yongtong Wanguo, Wuxing Dabu), taihuoliuzhu, Tiance Fubao, some of the money of Huizong in Song Dynasty, the money of Jin Dynasty, Dayuan Tongbao (BaWen), Chongzhen and Tianqi, Xianfeng Daqian and so on are generally deep on both sides. The five baht coins of the Six Dynasties are lighter than those of the two Han Dynasties in face and back, with thinner strokes, more irregular outlines and smaller shapes. In the Yuan Dynasty, except for Zhizheng Tongbao, the other coins had a shallow outline, and the meat of the coins was diffuse; The back of zhengquan banknote is often wrong, which causes the characters and outline to tilt to one side. Tianqi (Xu), Tianding, Tianyou, Dayi and Longfeng are exquisite, but the money back is not refined; Compared with the five, the great justice is a little worse, so it is called "the essence of heaven, the abuse of great justice". Emperor Chen Wendi's five baht "Zhu" Yuan fold. Higher than the "gold" character, the outline is slightly wide, and the "Five" character forms two isosceles triangles at the top and bottom. Wang Mang, song Huizong, Jin Zhangzong and the Northern Zhou Dynasty are the most exquisite ancient Chinese coins. The first three are commonly known as "three wonders". Wang Mang's words "one Dao is equal to five thousand" and "one Dao" are inlaid with gold. They are similar to Qian rouping, neither protruding nor invading. Taihe Zhongbao's ten fold seal script Qian is smooth and delicate, without sand holes, symmetrical inside and outside outline, even thickness, deep and precipitous characters, no adhesion between strokes, no sundries in the crack of characters, the corner between inside and outside outline and Qian Rou, Taihe two characters are close to inside and outside outline, without adhesion, and the protruding parts of characters and inside and outside outline are rounded. Liaoqian, Dali, Jianzhong, Huichang Kaiyuan, Tianfu Yuanbao, Taiping Baiqian, yuandaiqian (except Zhizheng) are of the lowest quality. Most of them are not symmetrical in face and back, with flowing copper and sand holes everywhere. And Tianfu Yuanbao, Taiping hundred coins of different sizes, light and simple. Xiaojian, Yongguang and Jinghe of the Six Dynasties are the most frivolous ancient Chinese coins. They are commonly known as "can float in water", with a diameter of 1.5-1.7 cm. They are small in size and small in strokes. The characters of liangzaoxinquan are small and upright, with flowing copper between the strokes, and the characters are not very clear. There are two versions of Longwu Tongbao, the large version and the small version. The characters are a little fat and thin. The large version is rare. In the small version, there is a broken foot in the lower part of the word "Wu" in the "Wu" character, which is like an anti-counterfeiting secret sign
according to the identification of coin experts, there have been some coins that do not actually exist in China, and some of them have been listed in the atlas. Examples are as follows: Iron and lead coins with characters on the back of Tiance house, three character sword of Qi Zhi Hua, nine character sword of Qi, Bao Zi Bu and Ning Zi Bu, five Phoenix in Han Dynasty, Zhengsheng, Dazu and Baoli in Tang Dynasty, Phoenix calendar and Guangshun in Five Dynasties. These coins are all forged< In addition to the above main methods, we can also smell its Qi, lick its taste, listen to its sound, balance its weight and so on. Generally speaking, these methods are very limited, and some of them are difficult to judge accurately. Here is also a brief introction
(1) smell it with nose. This method is only effective for odorous coatings. For example, the false rust made of rosin adhesive can smell the smell of pine. Some odorless rust can't smell directly. Only when the rust is burned with fire can the smell be detected
(2) lick its taste with tongue. This method can only be used to lick out some rusts with peculiar smell. For example, the counterfeit coins soaked in brine solution are salty. And the true rust and false rust are slightly toxic, and it is not hygienic to lick with the tongue, so it is not suitable to use
(3) listen to the sound
toss coins on the table, glass plate and hard floor to hear the sound and distinguish the material and sound transmission performance. This method is often not very accurate: the size of the coin is different, the degree of corrosion is different, whether the money body is damaged or not, and so on, all affect the sound transmission performance of the coin, it is difficult to determine accurately, and this method is harmful to the appearance of the coin. In the previous "material, metal primary color, sound identification" has been mentioned, should not be used
(4) balance the weight
the ingredients of ancient coins are not accurate, the shapes and sizes are different, the degree of corrosion and wear is different, and the weight of coins of the same variety and specification is also different. Even if there is a weight difference compared with real money, it may be a different kind of money that has not been seen before, and it is difficult to be sure that it is fake money. Therefore, it is difficult to judge the authenticity and weight difference of ancient copper coins accurately.
the second is to observe the copper color method. Generally, the materials of ancient coins can be divided into bronze, red copper, brass and white copper. Bronze coins are easy to break, while brass coins are not easy to break and wear. White copper is mostly used for sample coins. Before the Ming Dynasty, most of the coins were made of bronze. There was no brass coin. If you find brass coins before the Ming Dynasty, you should be more careful
the third is the boiling water method. Ancient coins are often attached with red and green rust or handed down black rust. The real money rust is formed by natural oxidation for a long time and has strong adhesion. The fake rust is easy to fall off by boiling water
the fourth is the steel needle test method. The rust of ancient coins is relatively hard. Press the tip of the steel needle for sewing down and down vertically, and when you let go, the steel needle will fall down immediately. Fake rust is often true rust, add adhesive and other things daub, there is a certain degree of elasticity, steel needle is not easy to fall down
style judgment. Each dynasty has its own style of coins, which can be used to identify whether the ancient coins belong to counterfeit. There is also a method of comparative edition. Early ancient coins were all made by hand, and even the mother coins used to make coins were also made by hand carving. Therefore, there are some differences between the coins. If as like as two peas of coins are found, their page is exactly the same, or even the local defects are not bad, they should be suspected of being forgery. The shape and size of ancient coins, the advantages and disadvantages of rough and fine proction form different shape and system characteristics, which provides a basis for identifying the authenticity of coins. For example, before the Han Dynasty, Yuan Qian had a flat back, while from the later Han Dynasty to the Ming Dynasty, most of the ancient coins had a deep back. But in the Western Han Dynasty, the three baht was flat back. In the Northern Zhou Dynasty, Sanpin (buquan, Yongtong Wanguo, Wuxing Dabu), taihuoliuzhu, Tiance Fubao, some of the money of Huizong in Song Dynasty, the money of Jin Dynasty, Dayuan Tongbao (BaWen), Chongzhen and Tianqi, Xianfeng Daqian and so on are generally deep on both sides. The five baht coins of the Six Dynasties are lighter than those of the two Han Dynasties in face and back, with thinner strokes, more irregular outlines and smaller shapes. In the Yuan Dynasty, except for Zhizheng Tongbao, the other coins had a shallow outline, and the meat of the coins was diffuse; The back of zhengquan banknote is often wrong, which causes the characters and outline to tilt to one side. Tianqi (Xu), Tianding, Tianyou, Dayi and Longfeng are exquisite, but the money back is not refined; Compared with the five, the great justice is a little worse, so it is called "the essence of heaven, the abuse of great justice". Emperor Chen Wendi's five baht "Zhu" Yuan fold. Higher than the "gold" character, the outline is slightly wide, and the "Five" character forms two isosceles triangles at the top and bottom. Wang Mang, song Huizong, Jin Zhangzong and the Northern Zhou Dynasty are the most exquisite ancient Chinese coins. The first three are commonly known as "three wonders". Wang Mang's words "one Dao is equal to five thousand" and "one Dao" are inlaid with gold. They are similar to Qian rouping, neither protruding nor invading. Taihe Zhongbao's ten fold seal script Qian is smooth and delicate, without sand holes, symmetrical inside and outside outline, even thickness, deep and precipitous characters, no adhesion between strokes, no sundries in the crack of characters, the corner between inside and outside outline and Qian Rou, Taihe two characters are close to inside and outside outline, without adhesion, and the protruding parts of characters and inside and outside outline are rounded. Liaoqian, Dali, Jianzhong, Huichang Kaiyuan, Tianfu Yuanbao, Taiping Baiqian, yuandaiqian (except Zhizheng) are of the lowest quality. Most of them are not symmetrical in face and back, with flowing copper and sand holes everywhere. And Tianfu Yuanbao, Taiping hundred coins of different sizes, light and simple. Xiaojian, Yongguang and Jinghe of the Six Dynasties are the most frivolous ancient Chinese coins. They are commonly known as "can float in water", with a diameter of 1.5-1.7 cm. They are small in size and small in strokes. The characters of liangzaoxinquan are small and upright, with flowing copper between the strokes, and the characters are not very clear. There are two versions of Longwu Tongbao, the large version and the small version. The characters are a little fat and thin. The large version is rare. In the small version, there is a broken foot in the lower part of the word "Wu" in the "Wu" character, which is like an anti-counterfeiting secret sign
according to the identification of coin experts, there have been some coins that do not actually exist in China, and some of them have been listed in the atlas. Examples are as follows: Iron and lead coins with characters on the back of Tiance house, three character sword of Qi Zhi Hua, nine character sword of Qi, Bao Zi Bu and Ning Zi Bu, five Phoenix in Han Dynasty, Zhengsheng, Dazu and Baoli in Tang Dynasty, Phoenix calendar and Guangshun in Five Dynasties. These coins are all forged< In addition to the above main methods, we can also smell its Qi, lick its taste, listen to its sound, balance its weight and so on. Generally speaking, these methods are very limited, and some of them are difficult to judge accurately. Here is also a brief introction
(1) smell it with nose. This method is only effective for odorous coatings. For example, the false rust made of rosin adhesive can smell the smell of pine. Some odorless rust can't smell directly. Only when the rust is burned with fire can the smell be detected
(2) lick its taste with tongue. This method can only be used to lick out some rusts with peculiar smell. For example, the counterfeit coins soaked in brine solution are salty. And the true rust and false rust are slightly toxic, and it is not hygienic to lick with the tongue, so it is not suitable to use
(3) listen to the sound
toss coins on the table, glass plate and hard floor to hear the sound and distinguish the material and sound transmission performance. This method is often not very accurate: the size of the coin is different, the degree of corrosion is different, whether the money body is damaged or not, and so on, all affect the sound transmission performance of the coin, it is difficult to determine accurately, and this method is harmful to the appearance of the coin. In the previous "material, metal primary color, sound identification" has been mentioned, should not be used
(4) balance the weight
the ingredients of ancient coins are not accurate, the shapes and sizes are different, the degree of corrosion and wear is different, and the weight of coins of the same variety and specification is also different. Even if there is a weight difference compared with real money, it may be a different kind of money that has not been seen before, and it is difficult to be sure that it is fake money. Therefore, it is difficult to judge the authenticity and weight difference of ancient copper coins accurately.
4. If you want to share mobile traffic with other devices, it is recommended that you:
1. Turn on mobile data and select net access point: drop down the top curtain menu - click mobile data to turn green; Set - connect - Mobile Network - access point name - select the access point of net
2. Open Settings - connect - WLAN hotspots and network sharing - Mobile hotspots - slide open, click more in the upper right corner (upper right corner) - configure mobile hotspots - you can set name, encryption method, password and hide my device
3. Use another computer or mobile phone to search for the local wireless hot spots and connect directly
note: if other devices can't be found after the mobile hotspot is turned on, it is recommended to check whether the hidden my device is turned on: settings - connection - WLAN hotspot and network sharing - Mobile hotspot - more in the upper right corner (upper right corner) - configure mobile hotspot - hide my device. Note: some models do not support this function
Expand
1. Mobile sharing network needs to be completed through the network setting of mobile phone, and the setting method of smart phone is basically similar. Take Samsung as an example. First, click to open "Settings" on the mobile desktop
2. After clicking "Settings", there are many settings in "Settings". In these settings, find the first "wireless and network" and click open
3. Click to open "wireless and network", scroll down to find "network sharing and portable hotspot", and click to open the function
4. Click to open "network sharing and portable hotspot" and find "portable WLAN hotspot settings". You need to open this setting to make the next setting, so click to open "portable WLAN hotspot setting"
5. After clicking "portable WLAN hotspot settings", you can see that there is no check after "portable WLAN hotspot". Now we need to check after "portable WLAN hotspot", so click "portable WLAN hotspot"
6. Then a dialog box will pop up, in which the user will be prompted to open the setting, and the traffic will increase. Then we need to click "OK"
7. After clicking "OK", you can see that "portable WLAN hotspot" has been checked. The checked status means that the traffic of the mobile phone can be used by others, but you need to input the password, which is set by the owner of the mobile phone. After the correct input, you can connect the mobile phone to the Internet
8. Then click "configure portable WLAN hotspot" below. After clicking open, you can set the name of the hotspot or adjust the open status of the hotspot. After adjustment, click "save"
9. If you don't use this hotspot, you should turn it off in time. Drop down the screen, find "activate network sharing and hotspot", and then click to open and close the settings.
1. Turn on mobile data and select net access point: drop down the top curtain menu - click mobile data to turn green; Set - connect - Mobile Network - access point name - select the access point of net
2. Open Settings - connect - WLAN hotspots and network sharing - Mobile hotspots - slide open, click more in the upper right corner (upper right corner) - configure mobile hotspots - you can set name, encryption method, password and hide my device
3. Use another computer or mobile phone to search for the local wireless hot spots and connect directly
note: if other devices can't be found after the mobile hotspot is turned on, it is recommended to check whether the hidden my device is turned on: settings - connection - WLAN hotspot and network sharing - Mobile hotspot - more in the upper right corner (upper right corner) - configure mobile hotspot - hide my device. Note: some models do not support this function
Expand
1. Mobile sharing network needs to be completed through the network setting of mobile phone, and the setting method of smart phone is basically similar. Take Samsung as an example. First, click to open "Settings" on the mobile desktop
2. After clicking "Settings", there are many settings in "Settings". In these settings, find the first "wireless and network" and click open
3. Click to open "wireless and network", scroll down to find "network sharing and portable hotspot", and click to open the function
4. Click to open "network sharing and portable hotspot" and find "portable WLAN hotspot settings". You need to open this setting to make the next setting, so click to open "portable WLAN hotspot setting"
5. After clicking "portable WLAN hotspot settings", you can see that there is no check after "portable WLAN hotspot". Now we need to check after "portable WLAN hotspot", so click "portable WLAN hotspot"
6. Then a dialog box will pop up, in which the user will be prompted to open the setting, and the traffic will increase. Then we need to click "OK"
7. After clicking "OK", you can see that "portable WLAN hotspot" has been checked. The checked status means that the traffic of the mobile phone can be used by others, but you need to input the password, which is set by the owner of the mobile phone. After the correct input, you can connect the mobile phone to the Internet
8. Then click "configure portable WLAN hotspot" below. After clicking open, you can set the name of the hotspot or adjust the open status of the hotspot. After adjustment, click "save"
9. If you don't use this hotspot, you should turn it off in time. Drop down the screen, find "activate network sharing and hotspot", and then click to open and close the settings.
5. The operation methods of setting traffic sharing to other devices are as follows:
1. Turn on the mobile data function and select net access point. Set - (connect) - Mobile Network - access point name
2. Set - (connect) - WLAN hotspots and network sharing / mobile hotspots and network sharing mobile hotspots slide switch (click the name or password to set it yourself)
3. Open the wireless network of other devices, search for mobile hot spots, and then connect
note:
1. After the mobile hotspot is turned on - click more / three points in the upper right corner - you can set the allowed device list / configure the mobile hotspot / timeout settings
2. When the mobile hotspot is turned on, the connected wireless network will be disconnected automatically.
1. Turn on the mobile data function and select net access point. Set - (connect) - Mobile Network - access point name
2. Set - (connect) - WLAN hotspots and network sharing / mobile hotspots and network sharing mobile hotspots slide switch (click the name or password to set it yourself)
3. Open the wireless network of other devices, search for mobile hot spots, and then connect
note:
1. After the mobile hotspot is turned on - click more / three points in the upper right corner - you can set the allowed device list / configure the mobile hotspot / timeout settings
2. When the mobile hotspot is turned on, the connected wireless network will be disconnected automatically.
6. Method 1: connect the mobile phone to the computer through USB cable and check "Settings - & gt; Wireless and network - & gt; Binding and portable hotspot - & gt; USB binding "option, the computer will appear on the virtual network card, in order to facilitate identification, to the virtual network card to change the name: Android
2. Share computer network to Android network card
3. Open the super terminal, Su becomes a super user, query the mobile IP: # busybox ifconfig, mobile IP: 192.168.43.100 (everyone is different)
4. Change the IP address of Android network card to 192.168.43.1
5. Add default gateway: # busybox route add default gw 192.168.43.1 (auxiliary software: busybox, z4root)
key point: the gateway IP on the mobile phone is the same as that on the computer< Method 2: wireless network card, mobile phone AP
this method is applicable to notebook or all-in-one computer with wireless network card, but does not support ad hoc. The third method is recommended to support ad hoc Generally, XP system will only use ad hoc, but Android mobile phone does not support ad hoc)
1. Check "Settings - & gt; Wireless and network - & gt; Binding and portable hotspot - & gt; "Portable Wi Fi hotspot" option, and set AP (such as myap)
2. The computer connects to myap and obtains the IP address (for example: 192.168.23.121)
3. Add default gateway: # busybox route add default gw 192.168.23.121 (auxiliary software: busybox, z4root)
key point: the gateway IP on the mobile phone is the same as that on the computer<
method 3: support ad hoc wireless network card and set up WiFi. If the wireless network card of the computer itself does not support this method,
you can buy an ad hoc USB wireless network card (generally with driver, which can directly simulate AP for mobile phone use) (in fact, this method is the same as our usual WiFi sharing wizard), So this method is just a rough one, because it can be replaced by software< Here, take win7 as an example (a common system) to describe the general process:
1. Run the command prompt as an administrator
2. Enable and set the "virtual WiFi network card" mode; Run the following command to enable the virtual wireless network card: Netsh WLAN set hosted network mode = allow SSID = (write the wireless network name here) key = (password here)
3. Enable "Internet connection sharing (ICS)"< 4. Turn on the wireless network: Netsh WLAN start hosted network
5. WiFi for mobile phone connection settings
2. Share computer network to Android network card
3. Open the super terminal, Su becomes a super user, query the mobile IP: # busybox ifconfig, mobile IP: 192.168.43.100 (everyone is different)
4. Change the IP address of Android network card to 192.168.43.1
5. Add default gateway: # busybox route add default gw 192.168.43.1 (auxiliary software: busybox, z4root)
key point: the gateway IP on the mobile phone is the same as that on the computer< Method 2: wireless network card, mobile phone AP
this method is applicable to notebook or all-in-one computer with wireless network card, but does not support ad hoc. The third method is recommended to support ad hoc Generally, XP system will only use ad hoc, but Android mobile phone does not support ad hoc)
1. Check "Settings - & gt; Wireless and network - & gt; Binding and portable hotspot - & gt; "Portable Wi Fi hotspot" option, and set AP (such as myap)
2. The computer connects to myap and obtains the IP address (for example: 192.168.23.121)
3. Add default gateway: # busybox route add default gw 192.168.23.121 (auxiliary software: busybox, z4root)
key point: the gateway IP on the mobile phone is the same as that on the computer<
method 3: support ad hoc wireless network card and set up WiFi. If the wireless network card of the computer itself does not support this method,
you can buy an ad hoc USB wireless network card (generally with driver, which can directly simulate AP for mobile phone use) (in fact, this method is the same as our usual WiFi sharing wizard), So this method is just a rough one, because it can be replaced by software< Here, take win7 as an example (a common system) to describe the general process:
1. Run the command prompt as an administrator
2. Enable and set the "virtual WiFi network card" mode; Run the following command to enable the virtual wireless network card: Netsh WLAN set hosted network mode = allow SSID = (write the wireless network name here) key = (password here)
3. Enable "Internet connection sharing (ICS)"< 4. Turn on the wireless network: Netsh WLAN start hosted network
5. WiFi for mobile phone connection settings
7. Open the settings in the phone, select "wireless and network", and click "move and share"
2 / select "portable WLAN hotspot", then turn on the local hotspot sharing, and then click "configure WLAN hotspot"
3 / then set the shared password, and finally click "save"
4 / in this way, other mobile phones can turn on WLAN to find the local hotspot, and enter the password to connect.
2 / select "portable WLAN hotspot", then turn on the local hotspot sharing, and then click "configure WLAN hotspot"
3 / then set the shared password, and finally click "save"
4 / in this way, other mobile phones can turn on WLAN to find the local hotspot, and enter the password to connect.
8.
Network sharing in mobile settings is used to set the way of mobile network sharing
today's smart phones have considerable network data functions (especially after the popularity of 4G). The mobile phone can not only provide the Internet for the mobile phone itself, but also share the mobile network of the mobile phone (4G, 3G or even 2G network) with computers, tablets and other mobile phones
the main sharing methods are:
-
portable WLAN hotspot sharing. You can use your mobile phone to establish a WiFi network for WiFi enabled devices to connect
-
Bluetooth sharing network, through the establishment of Bluetooth connection with other devices can share the use of mobile network
-
USB sharing: after connecting the mobile phone and the computer with USB data cable (usually installing relevant drivers), the computer can share the mobile network
< / OL > -
sharing network consumes mobile traffic, so use this function when the traffic is sufficient
-
sharing network generally consumes more power, so it should be used in combination with the situation of mobile phone< br />
precautions:
Hot content