How to calculate the rate of bitcoin
Publish: 2021-05-28 04:40:30
1. In order to understand the technical principle of bitcoin, we need to understand two important cryptographic techniques: hash code: it converts a long string into a fixed length string, and its conversion is irreversible, that is, it is impossible to guess the original string from hash code. Sha256 is mainly used in bitcoin protocol
public key system: corresponds to a public key and a private key, keeps the private key in the application and publishes the public key. When Party A transmits information to Party B, it can use Party A's private key to encrypt the information, and Party B can use Party A's public key to decrypt the information, so as to ensure that the third party cannot impersonate Party A to send the information; At the same time, when Party A transmits information to Party B, it is encrypted with Party B's public key and sent to Party B, and then Party B decrypts it with his own private key, so as to ensure that the third party cannot eavesdrop on the communication between the two people. RSA is the most common public key system, but the lliptic curve digital signature algorithm is used in bitcoin protocol. What's the difference between cash and bank account? Bitcoin is an electronic currency in BTC. In this article, it is also used to refer to the whole bitcoin system. Like opening an account in a bank, the corresponding concept in bitcoin is address. Everyone can have one or more bitcoin addresses, which are used to pay and collect money. Each address is a string that starts with 1. For example, I have two bitcoin accounts, and. A bitcoin account is uniquely determined by a pair of public key and private key. To save the account, you only need to save the private key file. Unlike bank accounts, banks keep all transaction records and maintain the book balance of each account, while bitcoin's transaction records are jointly maintained by the whole P2P network through a pre agreed protocol. How much money is in my account address? Although the current account balance can be seen by bitcoin software, unlike banks, there is no place to maintain the book balance of each address. It can only calculate the account balance in real time through all historical transactions. How do I pay? When I pay from address a to address B of the other party, the payment amount is e. at this time, both parties will announce the transaction information to each network node, telling address a to pay to address B, and the payment amount is e. In order to prevent the third party from forging the transaction information, the transaction information will be encrypted with the private key of address A. at this time, the network node receiving the transaction information can use the public key of address a to verify that the transaction information is indeed sent by address a. Of course, trading software will help us do these things, we just need to input the relevant parameters in the software. What will the network node do after receiving the transaction information? This is the most important part of the bitcoin system, which needs to be elaborated. For the sake of simplicity, only bitcoin protocol has been implemented. In the current version, each network node will save all transaction information synchronously. There are two kinds of transaction information in history, one is & quot; Verified & quot; The transaction information, that is, the verified transaction information, is stored in a series of "blocks". Each & quot; block" Is the previous & quot; bock" The ID of each block is the hash code of the hash code of the block and the new transaction information (see an actual block). The other category refers to those who also & quot; Unverified & quot; The transaction information just paid above belongs to this category. When a network node receives new unverified transaction information (possibly more than one), it can calculate the book balance of each address at that time because the node keeps all the transaction information in history, so it can calculate whether the transaction information is valid, that is, whether there is enough balance in the payment account. After eliminating the invalid transaction information, it first takes out the last & quot; block" Then, the unverified transaction information is combined with the ID, and a verification code is added to form a new "block". It needs a lot of calculation to build a new block, because it needs to calculate the verification code, so that the above combination becomes a block, that is, the first several bits of the hash code of the block are 1. At present, the first 13 bits need to be 1 (generally, the specific method is uncertain), which means that if the block is generated by enumeration method, the average number of enumerations is 16 ^ 13. Using CPU resources to generate a block is called "gold mining", because the proction of the block will get a certain reward, and the reward information has been included in the block. When a network node generates a new block, it will broadcast to other network nodes. However, this network block may not be accepted by the network, because it is possible that other network nodes have proced the block earlier. Only the earliest block or the block with the largest number of subsequent blocks is valid, and the remaining blocks are no longer used as the initial blocks of the next block. How does the other party confirm that the payment is successful? When the payment information is distributed to the network node, the network node begins to calculate whether the transaction is valid (that is, whether the account balance is enough to pay), and attempts to generate blocks containing the transaction information. When six blocks (one direct block and five subsequent blocks) contain the transaction information, the transaction information is considered "verified", so that the transaction is formally confirmed, and the other party can confirm the successful payment. A possible problem is that I will pay the balance of address a to address B, and at the same time pay to address C. If I only verify that the single comparison transaction is valid. At this point, my way of cheating is to generate six blocks including B to B and six blocks including C to C before the truth is revealed. Because I need a very long CPU time to generate a block, compared with the whole network, the probability of my cheating success is very small. What is the motivation of network nodes to proce blocks? As can be seen from the above description, in order to make the transaction information effective, the network node needs to generate 1 and 5 subsequent blocks to contain the transaction information, and such block generation is very CPU intensive. How to let other network nodes help to proce blocks as soon as possible? The answer is very simple. The agreement stipulates that BTC will be rewarded for the address where the block is proced, as well as the Commission promised by both parties. At present, the reward for procing a block is 50btc, which will be halved every four years in the future. For example, the reward will be 25btc from 2013 to 2016. Is the transaction anonymous? Yes, and No. All bitcoin transactions are visible. We can check all transaction records of each account, such as mine. But what's different from the banking monetary system is that everyone's account itself is anonymous, and everyone can open many accounts. In general, anonymity is not as good as it claims. But bitcoin has another advantage in doing black market trading: it can't be frozen. Even if the police trace a bitcoin address, there is nothing they can do unless they trace the computer used by the exchange based on the Internet address. How to ensure that bitcoin does not depreciate? Generally speaking, in the case of equivalent trading activities, the value of money is inversely proportional to the amount of money issued. Unlike the traditional money market, the central bank can determine the amount of money issued. Bitcoin does not have a central issuing institution. Only by procing blocks can we get a certain amount of BTC currency. Therefore, bitcoin's new amount of money depends on: 1. The speed of procing blocks: bitcoin's agreement stipulates that the difficulty of procing blocks is fixed at an average of 2016 every two weeks, about 10 minutes. Moore's law of doubling CPU speed every 18 months will not speed up the proction of block. 2. The number of rewards for block proction: at present, 50 BTC is awarded for each block proced, which is halved every four years. In 2013, 25 BTC is awarded, and in 2017, 12.5 BTC is awarded. Considering the above two factors, bitcoin's currency issuing speed is not controlled by any single node in the network. Its protocol makes the currency stock known in advance, and the maximum stock is only 21 million BTC
public key system: corresponds to a public key and a private key, keeps the private key in the application and publishes the public key. When Party A transmits information to Party B, it can use Party A's private key to encrypt the information, and Party B can use Party A's public key to decrypt the information, so as to ensure that the third party cannot impersonate Party A to send the information; At the same time, when Party A transmits information to Party B, it is encrypted with Party B's public key and sent to Party B, and then Party B decrypts it with his own private key, so as to ensure that the third party cannot eavesdrop on the communication between the two people. RSA is the most common public key system, but the lliptic curve digital signature algorithm is used in bitcoin protocol. What's the difference between cash and bank account? Bitcoin is an electronic currency in BTC. In this article, it is also used to refer to the whole bitcoin system. Like opening an account in a bank, the corresponding concept in bitcoin is address. Everyone can have one or more bitcoin addresses, which are used to pay and collect money. Each address is a string that starts with 1. For example, I have two bitcoin accounts, and. A bitcoin account is uniquely determined by a pair of public key and private key. To save the account, you only need to save the private key file. Unlike bank accounts, banks keep all transaction records and maintain the book balance of each account, while bitcoin's transaction records are jointly maintained by the whole P2P network through a pre agreed protocol. How much money is in my account address? Although the current account balance can be seen by bitcoin software, unlike banks, there is no place to maintain the book balance of each address. It can only calculate the account balance in real time through all historical transactions. How do I pay? When I pay from address a to address B of the other party, the payment amount is e. at this time, both parties will announce the transaction information to each network node, telling address a to pay to address B, and the payment amount is e. In order to prevent the third party from forging the transaction information, the transaction information will be encrypted with the private key of address A. at this time, the network node receiving the transaction information can use the public key of address a to verify that the transaction information is indeed sent by address a. Of course, trading software will help us do these things, we just need to input the relevant parameters in the software. What will the network node do after receiving the transaction information? This is the most important part of the bitcoin system, which needs to be elaborated. For the sake of simplicity, only bitcoin protocol has been implemented. In the current version, each network node will save all transaction information synchronously. There are two kinds of transaction information in history, one is & quot; Verified & quot; The transaction information, that is, the verified transaction information, is stored in a series of "blocks". Each & quot; block" Is the previous & quot; bock" The ID of each block is the hash code of the hash code of the block and the new transaction information (see an actual block). The other category refers to those who also & quot; Unverified & quot; The transaction information just paid above belongs to this category. When a network node receives new unverified transaction information (possibly more than one), it can calculate the book balance of each address at that time because the node keeps all the transaction information in history, so it can calculate whether the transaction information is valid, that is, whether there is enough balance in the payment account. After eliminating the invalid transaction information, it first takes out the last & quot; block" Then, the unverified transaction information is combined with the ID, and a verification code is added to form a new "block". It needs a lot of calculation to build a new block, because it needs to calculate the verification code, so that the above combination becomes a block, that is, the first several bits of the hash code of the block are 1. At present, the first 13 bits need to be 1 (generally, the specific method is uncertain), which means that if the block is generated by enumeration method, the average number of enumerations is 16 ^ 13. Using CPU resources to generate a block is called "gold mining", because the proction of the block will get a certain reward, and the reward information has been included in the block. When a network node generates a new block, it will broadcast to other network nodes. However, this network block may not be accepted by the network, because it is possible that other network nodes have proced the block earlier. Only the earliest block or the block with the largest number of subsequent blocks is valid, and the remaining blocks are no longer used as the initial blocks of the next block. How does the other party confirm that the payment is successful? When the payment information is distributed to the network node, the network node begins to calculate whether the transaction is valid (that is, whether the account balance is enough to pay), and attempts to generate blocks containing the transaction information. When six blocks (one direct block and five subsequent blocks) contain the transaction information, the transaction information is considered "verified", so that the transaction is formally confirmed, and the other party can confirm the successful payment. A possible problem is that I will pay the balance of address a to address B, and at the same time pay to address C. If I only verify that the single comparison transaction is valid. At this point, my way of cheating is to generate six blocks including B to B and six blocks including C to C before the truth is revealed. Because I need a very long CPU time to generate a block, compared with the whole network, the probability of my cheating success is very small. What is the motivation of network nodes to proce blocks? As can be seen from the above description, in order to make the transaction information effective, the network node needs to generate 1 and 5 subsequent blocks to contain the transaction information, and such block generation is very CPU intensive. How to let other network nodes help to proce blocks as soon as possible? The answer is very simple. The agreement stipulates that BTC will be rewarded for the address where the block is proced, as well as the Commission promised by both parties. At present, the reward for procing a block is 50btc, which will be halved every four years in the future. For example, the reward will be 25btc from 2013 to 2016. Is the transaction anonymous? Yes, and No. All bitcoin transactions are visible. We can check all transaction records of each account, such as mine. But what's different from the banking monetary system is that everyone's account itself is anonymous, and everyone can open many accounts. In general, anonymity is not as good as it claims. But bitcoin has another advantage in doing black market trading: it can't be frozen. Even if the police trace a bitcoin address, there is nothing they can do unless they trace the computer used by the exchange based on the Internet address. How to ensure that bitcoin does not depreciate? Generally speaking, in the case of equivalent trading activities, the value of money is inversely proportional to the amount of money issued. Unlike the traditional money market, the central bank can determine the amount of money issued. Bitcoin does not have a central issuing institution. Only by procing blocks can we get a certain amount of BTC currency. Therefore, bitcoin's new amount of money depends on: 1. The speed of procing blocks: bitcoin's agreement stipulates that the difficulty of procing blocks is fixed at an average of 2016 every two weeks, about 10 minutes. Moore's law of doubling CPU speed every 18 months will not speed up the proction of block. 2. The number of rewards for block proction: at present, 50 BTC is awarded for each block proced, which is halved every four years. In 2013, 25 BTC is awarded, and in 2017, 12.5 BTC is awarded. Considering the above two factors, bitcoin's currency issuing speed is not controlled by any single node in the network. Its protocol makes the currency stock known in advance, and the maximum stock is only 21 million BTC
2. The transaction cost of bitcoin is generally between 0.0001-0.0005btc. Of course, the amount accepted by each miner and miner's Association is different. Sometimes, a large amount of bitcoin transaction does not need a service charge, such as more than 100btc. Small transactions below 0.01btc will be charged a certain amount of fees. Of course, some bitcoin clients can set bitcoin transaction fee. If you set the transaction fee very low, the transaction confirmation time will be very long
first of all, we should understand that this service charge is given to miners to encourage them to continue mining and provide enough computing power for bitcoin, so as to ensure the security of bitcoin network. At present, the main income of miners is to get BTC reward by creating new blocks, but the reward is halved every four years. As time goes on, bitcoin transaction fee will graally replace bitcoin reward
under what circumstances should the handling charge be paid? What's the amount
bitcoin system has a series of network rules, including the handling charge rules, which are "what the client should do". When you use bitcoin client (wallet, bitcoin QT) to send bitcoin, the whole process is roughly divided into the following steps:
1. Prepare the bitcoin you want to send
the client is responsible for collecting the balance of bitcoin in your wallet (bitcoin QT) to prepare for payment, Because every bitcoin you receive is in your wallet until you spend it
if you withdraw 3btc and 2btc twice in okcoin bitcoin, their records in your wallet are independent, that is, a 3btc and a 2btc, instead of merging them into 5btc (the wallet only records transaction details, but does not merge the balance, but you can see the total balance on the interface of the wallet), As time goes on, you will accumulate a lot of bitcoin in your wallet. It is conceivable that there should be thousands of such records in okcoin bitcoin wallet. So when you send bitcoin, the wallet must decide which of the above records are most suitable for this sending
the bitcoin you get in a transaction is called "inputs" and the bitcoin you spend is called "outputs". There are multiple inputs and outputs in your wallet
2. Prevent a large number of micro payments from impacting the network
if you recharge the okcoin bitcoin trading platform less than 0.01btc (including the fund changes inside your wallet), you must pay a handling charge of 0.0001. When preparing your payment amount, the wallet has an established rule, that is, when preparing the payment amount in many inputs, try to avoid the amount change less than 0.01btc (for example, if you want to recharge 5.005btc to okcoin bitcoin, the wallet should choose 3 + 2.005 or 1 + 1 + 3.005 instead of 5 + 0.005)
3. The larger the amount, the higher the age of the currency, the higher the priority
if the amount you send is too small or your bitcoin has just been mined, then your transfer is no longer free. Each transaction will be assigned a priority, which is determined by the degree of currency, the number of bytes and the number of transactions. Specifically, for each input, the client will first multiply the number of bitcoins by the time they exist in the block (currency age, age), and then divide all the procts by the size of the transaction (in bytes). The calculation formula is: priority = sum (input)_ value_ in_ base_ units * input_ age)/size_ in_ If the calculation result is less than 0.576, then the transaction must pay the handling fee. This is why you need to add a 0.0001 when you withdraw with okcoin bitcoin, because the bitcoin transfer in okcoin wallet is frequent, and the time of bitcoin in the block is relatively short, so you need to pay a handling charge. If you do have a large number of small inputs, such as small miners, and want to transfer them out for free, you can add a large amount of bitcoin with a large currency age, and the average priority will be increased, so that bitcoin can be transferred out for free
4. Charge per kilobyte
at the end of the transfer, the client calculates the size of the transfer (in bytes), which generally depends on the amount of input and output. The calculation formula is as follows: 148 × Input amount + 34 × Output amount + 10. If the size of the transfer exceeds 10000 bytes, but the priority meets the free standard, you can still enjoy the free transfer, otherwise you need to pay the handling charge. The cost per 1000 bytes is 0.0001btc by default, but you can also add it in the client by opening the tab "settings & gt; Options & gt; The main purpose is to adjust the handling charge. If the service charge you are setting is less than 0.0001, BTC is calculated as 0.0001. When this rule applies, it will replace the rule in step 2 instead of accumulating.
first of all, we should understand that this service charge is given to miners to encourage them to continue mining and provide enough computing power for bitcoin, so as to ensure the security of bitcoin network. At present, the main income of miners is to get BTC reward by creating new blocks, but the reward is halved every four years. As time goes on, bitcoin transaction fee will graally replace bitcoin reward
under what circumstances should the handling charge be paid? What's the amount
bitcoin system has a series of network rules, including the handling charge rules, which are "what the client should do". When you use bitcoin client (wallet, bitcoin QT) to send bitcoin, the whole process is roughly divided into the following steps:
1. Prepare the bitcoin you want to send
the client is responsible for collecting the balance of bitcoin in your wallet (bitcoin QT) to prepare for payment, Because every bitcoin you receive is in your wallet until you spend it
if you withdraw 3btc and 2btc twice in okcoin bitcoin, their records in your wallet are independent, that is, a 3btc and a 2btc, instead of merging them into 5btc (the wallet only records transaction details, but does not merge the balance, but you can see the total balance on the interface of the wallet), As time goes on, you will accumulate a lot of bitcoin in your wallet. It is conceivable that there should be thousands of such records in okcoin bitcoin wallet. So when you send bitcoin, the wallet must decide which of the above records are most suitable for this sending
the bitcoin you get in a transaction is called "inputs" and the bitcoin you spend is called "outputs". There are multiple inputs and outputs in your wallet
2. Prevent a large number of micro payments from impacting the network
if you recharge the okcoin bitcoin trading platform less than 0.01btc (including the fund changes inside your wallet), you must pay a handling charge of 0.0001. When preparing your payment amount, the wallet has an established rule, that is, when preparing the payment amount in many inputs, try to avoid the amount change less than 0.01btc (for example, if you want to recharge 5.005btc to okcoin bitcoin, the wallet should choose 3 + 2.005 or 1 + 1 + 3.005 instead of 5 + 0.005)
3. The larger the amount, the higher the age of the currency, the higher the priority
if the amount you send is too small or your bitcoin has just been mined, then your transfer is no longer free. Each transaction will be assigned a priority, which is determined by the degree of currency, the number of bytes and the number of transactions. Specifically, for each input, the client will first multiply the number of bitcoins by the time they exist in the block (currency age, age), and then divide all the procts by the size of the transaction (in bytes). The calculation formula is: priority = sum (input)_ value_ in_ base_ units * input_ age)/size_ in_ If the calculation result is less than 0.576, then the transaction must pay the handling fee. This is why you need to add a 0.0001 when you withdraw with okcoin bitcoin, because the bitcoin transfer in okcoin wallet is frequent, and the time of bitcoin in the block is relatively short, so you need to pay a handling charge. If you do have a large number of small inputs, such as small miners, and want to transfer them out for free, you can add a large amount of bitcoin with a large currency age, and the average priority will be increased, so that bitcoin can be transferred out for free
4. Charge per kilobyte
at the end of the transfer, the client calculates the size of the transfer (in bytes), which generally depends on the amount of input and output. The calculation formula is as follows: 148 × Input amount + 34 × Output amount + 10. If the size of the transfer exceeds 10000 bytes, but the priority meets the free standard, you can still enjoy the free transfer, otherwise you need to pay the handling charge. The cost per 1000 bytes is 0.0001btc by default, but you can also add it in the client by opening the tab "settings & gt; Options & gt; The main purpose is to adjust the handling charge. If the service charge you are setting is less than 0.0001, BTC is calculated as 0.0001. When this rule applies, it will replace the rule in step 2 instead of accumulating.
3. Watch it on the non trumpet
4. Bitcoin transfer fee is a fee paid by traders to miners, which is used to encourage miners to compete for bookkeeping and provide enough computing power for bitcoin, so as to ensure the security of bitcoin network. In some places, it is also called miners' fee
when users initiate a transfer in bitcoin network, they usually need to pay a certain transfer fee to the bookkeeper. The transfer service charge is generally 0.001-0.0015 bitcoins. Due to the limited capacity of the block to hold transaction records, miners will give priority to the transaction with high service charge, so the overpaid service charge can be recorded faster
the existence of bitcoin transaction fees can improve the transfer threshold, effectively prevent the blockchain from being full of junk information, and ensure that the miners still have the motivation to maintain the bitcoin network after bitcoin is g up.
when users initiate a transfer in bitcoin network, they usually need to pay a certain transfer fee to the bookkeeper. The transfer service charge is generally 0.001-0.0015 bitcoins. Due to the limited capacity of the block to hold transaction records, miners will give priority to the transaction with high service charge, so the overpaid service charge can be recorded faster
the existence of bitcoin transaction fees can improve the transfer threshold, effectively prevent the blockchain from being full of junk information, and ensure that the miners still have the motivation to maintain the bitcoin network after bitcoin is g up.
5. For example, easybtc, ordinary users do not need any fees to buy or sell. That is, some advertisers need to spend money, you might as well register to experience it.
6. It is often said that you can send bitcoin to any corner of the earth for free. Generally, you can transfer bitcoin for free, but in some cases, you have to pay transaction fees to complete the transfer. In version 0.8.3 bitcoin wallet, the default is 0.0001 bitcoin transfer fees. This service charge is awarded to miners to encourage them to continue mining and provide enough computing power for bitcoin to ensure the security of bitcoin network. At present, the main income of miners is to get 25btc reward by creating new blocks, but this reward is halved every four years. As time goes on, bitcoin transaction fee reward will graally replace the reward for creating new blocks. Under what circumstances do you need to pay the handling charge? How much does bitcoin charge? What is the handling charge? Bitcoin system has a series of network rules, including fee rules, which are "what the client should do". When you use bitcoin client (wallet, bitcoin QT) to send bitcoin, the whole process is roughly divided into the following steps:
1. Prepare the bitcoin you want to send. The client is responsible for collecting the balance of bitcoin in your wallet (bitcoin QT) to prepare for payment, because every bitcoin you receive is stored in your wallet until you spend it. If you receive two payments from 3btc and 2btc, their records in the wallet are independent of each other, that is, a 3btc and a 2btc, rather than merging them into 5btc (the wallet only records transaction details and does not merge the balance, but you can see the total balance on the interface of the wallet). As time goes on, many bitcoins of different amounts will accumulate in your wallet, So when you send bitcoin, the wallet has to decide which bitcoin is the most suitable for this sending. The bitcoin you get in a transaction is called "inputs" and the bitcoin you spend is called "outputs". There are multiple inputs and outputs in your wallet
2. If your outputs are less than 0.01btc (including the fund changes inside your wallet), you have to pay a handling charge of 0.0001, even if you transfer it to yourself. The wallet has an established rule when preparing your payment amount, that is, when preparing the payment amount in many inputs, try to avoid the amount change less than 0.01btc (for example, if you want to pay 5.005btc, the wallet should choose 3 + 2.005 or 1 + 1 + 3.005 instead of 5 + 0.005)
3. The larger the amount, the higher the age, and the higher the priority. If the amount you send is too small or your bitcoin has just been mined, then your transfer is no longer free. Each transaction will be assigned a priority, which is determined by the degree of currency, the number of bytes and the number of transactions. Specifically, for each input, the client will first multiply the number of bitcoins by the time they exist in the block (currency age, age), and then divide all the procts by the size of the transaction (in bytes). The calculation formula is: priority = sum (input)_ value_ in_ base_ units * input_ age)/size_ in_ If the calculation result is less than 0.576, then the transaction must pay the handling fee. If you do have a large amount of small input and want to transfer it out for free, you can add a large amount of bitcoin with a large age, which will increase the average priority, so that you can transfer out bitcoin for free
4. Charge per kilobyte. At the end of the transfer, the client will detect the size of the transfer (in bytes). The size generally depends on the amount of input and output. The calculation formula is as follows: 148 * input amount + 34 * output amount + 10. If the size of the transfer exceeds 10000 bytes, but the priority meets the free standard, you can still enjoy the free transfer, Otherwise, there will be a handling charge. The cost of 1000 bytes is 0.0001btc by default, but you can also add it in the client. Open the tab "settings & gt; Options & gt; The main purpose is to adjust the handling charge. If the service charge you are setting is less than 0.0001, BTC is calculated as 0.0001.
1. Prepare the bitcoin you want to send. The client is responsible for collecting the balance of bitcoin in your wallet (bitcoin QT) to prepare for payment, because every bitcoin you receive is stored in your wallet until you spend it. If you receive two payments from 3btc and 2btc, their records in the wallet are independent of each other, that is, a 3btc and a 2btc, rather than merging them into 5btc (the wallet only records transaction details and does not merge the balance, but you can see the total balance on the interface of the wallet). As time goes on, many bitcoins of different amounts will accumulate in your wallet, So when you send bitcoin, the wallet has to decide which bitcoin is the most suitable for this sending. The bitcoin you get in a transaction is called "inputs" and the bitcoin you spend is called "outputs". There are multiple inputs and outputs in your wallet
2. If your outputs are less than 0.01btc (including the fund changes inside your wallet), you have to pay a handling charge of 0.0001, even if you transfer it to yourself. The wallet has an established rule when preparing your payment amount, that is, when preparing the payment amount in many inputs, try to avoid the amount change less than 0.01btc (for example, if you want to pay 5.005btc, the wallet should choose 3 + 2.005 or 1 + 1 + 3.005 instead of 5 + 0.005)
3. The larger the amount, the higher the age, and the higher the priority. If the amount you send is too small or your bitcoin has just been mined, then your transfer is no longer free. Each transaction will be assigned a priority, which is determined by the degree of currency, the number of bytes and the number of transactions. Specifically, for each input, the client will first multiply the number of bitcoins by the time they exist in the block (currency age, age), and then divide all the procts by the size of the transaction (in bytes). The calculation formula is: priority = sum (input)_ value_ in_ base_ units * input_ age)/size_ in_ If the calculation result is less than 0.576, then the transaction must pay the handling fee. If you do have a large amount of small input and want to transfer it out for free, you can add a large amount of bitcoin with a large age, which will increase the average priority, so that you can transfer out bitcoin for free
4. Charge per kilobyte. At the end of the transfer, the client will detect the size of the transfer (in bytes). The size generally depends on the amount of input and output. The calculation formula is as follows: 148 * input amount + 34 * output amount + 10. If the size of the transfer exceeds 10000 bytes, but the priority meets the free standard, you can still enjoy the free transfer, Otherwise, there will be a handling charge. The cost of 1000 bytes is 0.0001btc by default, but you can also add it in the client. Open the tab "settings & gt; Options & gt; The main purpose is to adjust the handling charge. If the service charge you are setting is less than 0.0001, BTC is calculated as 0.0001.
7.
The service charge of okex bitcoin exchange is the lowest in the world, ranging from 0.15% to 0.02%, and there is no charge for platform currency okb
in bybit, for each successful order, bybit platform will automatically decide to charge or provide rewards according to the order attributes. For "market makers" in the market, the system will give 0.025% reward based on the contract value for each successful price limit order
for the "price receiver" in the market, the system will charge 0.075% of the contract value based on the contract value for each successful market order. A $5 bitcoin transaction may have the same handling charge as a $5000 bitcoin transaction
they are measured by satoshis
8. Each trading platform is different, and many of chbtc are free of transaction fees. It's more expensive for the minority or the OTC market. It's five to three thousandths more expensive
9. The revenue of bitcoin is based on bitcoin every day. The rise and fall are calculated. If it's long, it's positive. If it's down, it's not. Haha, I suggest that my friends try not to play for him, because the price of bitcoin is very high now. If you buy it now, it's the order taker. It's going to hold you tight. And you'll lose a lot of money. So stay away from bitcoin. hey
Hot content