Bluetooth BTC

1. Dear Samsung users:
Samsung S7 mobile phone connecting Bluetooth device method:
1. Turn on Bluetooth function: Set - (connect) - Bluetooth - on
2. Turn on Bluetooth visible mode, operation:
1). If you are using Android 2.3 or earlier: settings - Wireless and network - Bluetooth settings - visible - check< If you are using Android 4.0 or above: Set - (connect) - Bluetooth - swipe on, top "invisible to other Bluetooth devices" - check (enable visible mode)
3. Scan the nearby Bluetooth devices and connect them by pairing. In the Bluetooth pairing request dialog box of the two devices, click OK.

2.

To connect Bluetooth, you need to find the name of Bluetooth, click and match to connect successfully. As for btc-030, it is the model of Bluetooth headset. The name of Bluetooth is in the connection. Click the Bluetooth name to match. If the match is successful, the connection is successful

when Bluetooth headset is connected to FM, Bluetooth function must be turned on for both devices. Btc-030 displayed on FM is the name of Bluetooth headset to be connected. Generally, the Bluetooth name of Bluetooth headset is its own model, so you only need to click connect at this time

extended information :

1. The mobile phone can't find the Bluetooth headset:

possible reasons and solutions:

1. The Bluetooth headset is not in the pairing state. Solution: after the Bluetooth headset is turned off, long press the JetBlue Bluetooth multifunction key (i.e. red and blue lights flash alternately) to activate Bluetooth pairing

2, Bluetooth headset program error. Solution: restore the Bluetooth headset to the factory settings

3, Bluetooth program error. Solution: after the mobile phone is restarted, all pairing data stored in the Bluetooth of the mobile phone will be cleared; Search Bluetooth again

2. Common problems and solutions in the use of Bluetooth connection:

1. Bluetooth headset can not be charged: if it is idle for a long time, it takes about 20 minutes to activate the battery of Bluetooth headset. One of the Bluetooth headset or charger has been damaged. You can connect it with the intact device respectively and find out the problem after testing

2. Bluetooth headset can't be paired with mobile phone: please confirm whether the operation steps are correct. Bluetooth headset is not compatible with mobile phone. For example, a mobile phone with Bluetooth version 1.1 cannot be connected to a headset with Bluetooth version 2.0

3. The Bluetooth headset is always disconnected after connecting with the mobile phone: the power of the Bluetooth headset is exhausted, and the Bluetooth headset needs to be charged as soon as possible. The compatibility between Bluetooth headset and mobile phone is not very good. The Bluetooth signal transmitted by mobile phone can not be received by the headset. Once there is a barrier between the headset and mobile phone or the distance is a little longer, the headset will automatically disconnect from the mobile phone, and then automatically shut down

4. Bluetooth headset can't listen to music: at present, many new mobile phones can only support stereo Bluetooth headset, which has built-in A2DP function. If you still use one ear headset, you can't listen to songs on your mobile phone. For example, Samsung's series of new mobile phones. The Bluetooth version of the mobile phone is relatively low and does not support Bluetooth audio transmission. Basically, the mobile phones before 2005 didn't use Bluetooth to listen to music

some mobile phones can listen to music with mono or binaural stereo Bluetooth headset, but they can hear mono music. For example, Nokia's 7610 / N70 and other mobile phones can realize stereo function by adding Bluetooth player

5. Service life of Bluetooth headset: the service life of original Bluetooth headset can reach more than 500 times of repeated charging, and some excellent procts can even reach more than 700 times of repeated charging. The quality of high imitation Bluetooth earphones in China is different. Generally, the earphones proced by factories with better quality can be recharged about 300 times. If it's from a fake factory, it won't take long for the battery to be scrapped

How to identify high imitation and original Bluetooth headset: put the headset on your left ear, cover it with your hand, and then put the mobile phone behind your body to make a call. This is equivalent to two artificial barriers between the headset and the mobile phone. If the call effect is OK, the headset is original. Of course, this should be based on the premise of good compatibility between headphones and mobile phones

in general, there will be no signal in high imitation headphones immediately, and some original headphones will have obvious noise

pass the distance test. Put on the earphone and walk about 5 meters away from the mobile phone. If there is no noise or only slight noise in the call, it proves that the earphone is original. If you walk 2 or 3 meters away, the noise is very obvious, and you can't even answer or make calls when you walk around, it's undoubtedly an imitation

7. How to use Bluetooth headset to listen to music and chat on the computer: Bluetooth headset can not only be used on the mobile phone, but also can listen to music and chat on the computer. First of all, a Bluetooth adapter should be equipped. The adapter is used to connect the Bluetooth headset with the computer

3. Hello
1. Turn on the on key of Bluetooth headset, and long press the on key until the red and blue lights flash alternately
2. Turn on the Bluetooth function of the mobile phone, set the devices to "visible to all" and search for Bluetooth devices
3. After finding the connection, select the connection, and the password is 0000. If the connection is successful, the pairing is completed
4. Call to test
hope to help you, hope to adopt!

4. It's a Bluetooth headset of xutronik brand from the United States. Btc-1800 costs US $119.99 abroad.
of course, it's made in China

5.

The solution to the problem is as follows:

1. For the opening method of Bluetooth, there is usually a corresponding "switch" prompt on the front panel or keyboard of the laptop. Press "FN" + "F5" directly to open the Bluetooth function of the laptop

this solves the problem that Bluetooth can't be used in notebook computers

6.

1. Find the local Bluetooth device ID

this is very simple. Find the Bluetooth device in the device manager and click "properties" to view "details" to see "device instance ID"

2. Modify bttl.ini to add support for built-in Bluetooth of ThinkPad

3. Modify btcusb.inf to take over Bluetooth device< br />

7. 1. It's very easy to find the Bluetooth device ID of this machine. Find the Bluetooth device in the device manager and click "properties" to view "details" to see "device instance ID". If not, install the Bluetooth driver again and install BlueSoleil Bluetooth software. You can't find the solution for the device. Can you refine it? BlueSoleil is a good Bluetooth management software, The current version is blue Soleil_ 3.2. The trial version has 5m limitation, which can be removed by replacing with XX file. After installing BlueSoleil, it is found that the built-in Bluetooth device cannot be found in my Bluetooth. Modifying the following contents can solve the problem: 1. It's very easy to find the Bluetooth device ID of this machine. Find the Bluetooth device in the device manager, and click "properties" view "details" to see "device instance ID". My machine is T400, and "USB & # 92" is displayed here; VID_ 0A5C&pID_ 2145\ 5 & 2ff31994 & 0 & 2 ", so the ID of the device is USB & # 92; VID_ 0A5C&pID_ 21452. Modify bttl.ini to add support for built-in Bluetooth of ThinkPad. Bttl.ini is located in the installation directory, and the default is "C: & # 92; ProgramFiles\ IVTCorporation\ BlueSoleil "in this file, we can see the support list of the device. Pay attention to change two numbers: [default] port = num = 110driverrt = C: &# 92; ProgramFiles\ IVTCorporation\ BlueSoleil\ TL = hw110 add an item at the end: [hw110] id = USB & # 92; VID_ 0A5C&pID_ 2145Type=BluetoothUSBDongleDLL=Driver\ USB\ btcusb.dllDLLD=Driver\ USB\ btcusbd.dllInffile=Driver\ USB\ Btcusb. Infmanufacture = IBM note that id = xxxxx is the first step. We find the device ID 3 in the device manager and modify btcusb. Inf to take over the Bluetooth device. Btcusb. Inf is located in C: &# 92; ProgramFiles\ IVTCorporation\ BlueSoleil\ driver\ USB directory. Add the following contents in the following two configuration sections: [controlflags] excludefromselect = USB & # 92; VID_ 0A5C&pID_ 2145[IVT]%IBM.DeviceDesc%=BTusb_ DDI,USB\ VID_ 0A5C&pID_ 2145%IBMBM3.DeviceDesc%=BTusb_ DDI,USB\ VID_ 0A5C&pID_ 2145 note that the two sections of IVT should be added in different positions. If you look at the contents of the file, you will understand. Note: USB & # 92 above; VID_ 0A5C&pID_ 2145 is also the device ID you see in the device manager. After modifying, restart BlueSoleil and you will find my Bluetooth device. Just verified., Share it, BlueSoleil_ 3.2 and crack their own download on the line

8. Meili bay bus stop starts from Waishen. There is a fork in front of neishen. You can go up the mountain on both sides. There are more people on the left. It's about four hours