Yingtai tb250btc installed win10
BIOS
to upgrade the latest 503bios on the official website:
http://www.biostar.cn/upload/Bios/B25CF503.BSS.rar
UEFI
BIOS update method, steps and confirmation diagram
http://www.biostar.cn/app/en-us/support/faq_ content.php?S_ Id = 503
(2) the OS must be installed with one or five graphics cards first,
the system must use win10
1703 version
and UEFI
OS installation.
after installation, plug in all six graphics cards.
then set them in BIOS.
BIOS setting
Yingtai tb250-btc with six graphics cards mining processing method:
1 M. 2
the SSD of the PCI channel needs to occupy the PCI channel, while the tb250-btc of the six cards also occupies multiple PCI channels
2. In this way, once the PCI
SSD is inserted, the insufficient PCI channel of CPU will cause hardware conflict, which will lead to the failure of some graphics cards. Moreover, the miner does not have high requirements for hard disk. Therefore, it is better not to use the m.2
SSD of PCI
for miner.
Methods / steps
1. The installation steps of the original image of win7 are as follows, or use the pure system focusing on win7
2. Use the decompression tool to extract the original image file of win7 to a partition other than disk C, such as disk D, and then click setup.exe for the next step
however, to play mining, it is recommended to buy a more efficient ant miner instead of a graphics card. The graphics card is only a general-purpose calculation, not a specific one. The ant miner has higher efficiency and lower power consumption.
this is a motherboard launched by Yingtai for the mining market. Its main advantage is that it has multiple PCI-E slots and can connect up to six graphics cards at the same time. If it is for ordinary household use, this motherboard has little advantage
if you like Yingtai motherboard, you can take a look at b250gt3, which is compatible with 6-9 generations of processors, and the configuration is much more reasonable
1. The graphics card slot type of Yingtai tb250 BTC motherboard is PCI-E x163.0 standard
The main board of PCI-E x16 is also divided into 1.0, 2.0 and 3.0 interfaces, which means that the bandwidth is different, but all kinds of graphics cards can be used in general If the interface is 1.0, it will be changed automatically and compatibleYingtai TP75 motherboard is the upgraded version of B75 series for the previous generation of H61 series. Compared with H61 series, native USB3.0 and sata6gb / s interfaces are added
main chipset: intelb75 audio chip: integrated realtekalc6626 channel audio chip memory slot: 2 × Ddr3dimm maximum memory capacity: 16GB motherboard: ATX board size: 30.5 × 21.0cm power socket: a 4-pin, a 24 pin power socket
Yingtai tb250-btc Pro motherboard adopts narrow board design, based on B250 chipset, and supports Intel lga1151 interface CPU. The power supply part adopts 7-phase power supply concept design, with all solid-state capacitor from Taiwan Yubang, which brings extraordinary filtering effect and rability
in terms of memory, it provides 2 DIMMs, supports DDR4 memory, and supports 2400mhz procts at most. Six sata3 interfaces are provided for disk. In terms of interface, the door motherboard provides four USB3.0 ports and two USB2.0 ports with power supply capability. In addition, there are PS / 2 port and DVI interface for keyboard and mouse. Of course, RJ45 network port and audio port are also necessary
the integrated sound card of the motherboard adopts the famous Realtek alc887 chip, supports 7.1 channel output, and is equipped with the audio special capacitor proced by Nippon
in PCI-E slot, tb250-btc Pro motherboard provides up to 12 slots, which can run 12 graphics cards parallel mining at the same time. In order to improve the power supply capacity of PCI-E slot, the motherboard designs two additional D ports to meet the huge power demand of multi graphics card for PCI-E slot
if you can't, you can only install the system with the oil tray boot disk or the system CD