Audi BTC fault

1.

1. This does not need too many settings, the best graphics card to use NV graphics card 2, the system win10, the power supply is sufficient, the latest version of the motherboard BIOS, the BIOS settings for the main graphics card to PCI e

2, the hard disk must be GPT format, the system must be 64 bit, UEFI does not support 32-bit system

note: UEFI can boot x64 system on MBR disk, but it needs special settings

3. The traditional MBR partition only supports 2.2t hard disk, and the hard disk larger than 2.2t needs GPT, and the BIOS supports opening the integrated graphics card (which can be set) to double display

However, Qicaihong does not have the motherboard of h81-a. h81-a is an ASUS brand and can not support six graphics cards

select factory settings in BIOS, press enter to save and exit, then discharge the main board COMS, and then enter BIOS to set

{rrrrrrr}

extended data:

seven rainbow motherboard boot into BIOS method:

1, you can press del key to enter BIOS

2. You can boot the BIOS directly without connecting the hard disk

there are two conditions for supported graphics cards:

1. Several graphics cards are supported in a few slots, and the expansion slots of ciex1 and pciex16

The main board power supply and power supply are enough. When most motherboards are turned on, you can enter the BIOS interface by continuously pressing the "del" key. Some notebooks can only enter the BIOS interface by pressing F2

BIOS is not only the basic input and output system of computer motherboard, but also the basic system of communication and recognition between computer hardware

contents include: power settings, hardware on / off, hardware working mode settings, overclocking, etc. The contents of bios are in English. Now some brands of new motherboards support Chinese. The options in BIOS can't be set randomly without understanding its specific function, so as to avoid the computer can't boot normally

its main function is to provide the most direct hardware setting and control for the computer. In addition, BIOS also provides some system parameters to the operating system

the change of system hardware is hidden by BIOS, and the program uses BIOS function instead of directly controlling the hardware. Modern operating systems ignore the abstraction layer provided by BIOS and directly control hardware components

BIOS Setup program mainly manages and sets the basic input and output system of the computer to make the system run in the best state. Using BIOS Setup program can eliminate system faults or diagnose system problems

2. BTC" This situation indicates that your vehicle has light failure (the light is not on), please check the high beam, low beam, driving lights (front and rear 4)
steering lights (front and rear 4) and brake lights for failure. After the fault is repaired (changing the bulb), the fault light on the instrument panel will go out.

3. Good morning, BMW's DTC system is a dynamic stability system. There are many reasons for the failure of the DTC system. I suggest that you use the computer to test the fault content, find out the reason and solve the problem. 4S shop professional technician, 10 minutes to solve

4. Please find it in the operation manual of the equipment first. If you can't find it, please consult the official after-sales service or official customer service.

5. Boot restart, is it related to the improper operation before you shut down? For example: playing games, watching videos, operating big things, using the computer for a long time caused by the card, right? Or download the inappropriate things, or delete the system files, or power off, the fault will not happen for no reason, right

press the power button to switch on and off repeatedly, and try to put it on for a while. If you really can't, you can't just re install the system. If you can't re install it yourself, you can spend 30 yuan to find someone to help you

as long as your computer doesn't get stuck, has a blue screen, and is shut down suddenly, it won't turn on like this

please ask me if you have any questions.

6. network

7. The data cable of the monitor should be connected to the single display interface. Press the F2 or del key to enter the BIOS when starting up.

8. In other words, the task of BTC only needs some specific transistors to execute

the CPU is used to perform mining tasks. Because the CPU needs many transistors to execute various instructions, many transistors are idle in a cycle. The speed is slow and normal

In order to enhance the ability of displaying images, the graphics card saves many transistors which have nothing to do with the display function, so the graphics card can only display pictures, but it is much faster than the CPU in the task of displaying pictures. BTC needs to perform the same tasks as the graphics card, so the mining of the graphics card is faster than the CPU, So a card is more suitable for mining